Abstract
In focus is improvement of hole-making technology by vibro hammer pushing with batch-wise removal of soil core while a pipe is driven in soil under impact loading. The important advantage of the technology is the concurrent pipe driving and soil core removal. The minimal air pressure required to separate a core and transport it along the pipe is determined. The frequency of soil core separation and transport during vibro-hammer driving of pipes in soil has been tested in underground construction of utilities. The tests prove the possibility to cut-down time of trenchless construction of underground passages and to raise the level of mechanization of the operations.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Danilov, B.B. and Smolyanitsky, B.N., Analysis of Modern Trends in the Subsoil Hole-Making Technologies, J. Fundament. Appl. Min. Sci., 2014, vol. 1, no. 2, pp. 104–113.
Smolaynitsky, B.N., Repin, A.A., Danilov, B.B. et al., Povyshenie effektivnosti i dolgovechnosti impul’snykh mashin dlya sooruzheniya protyazhennykh skvazhin v porodnykh massivakh (Increase in Efficiency and Durability of Pulse-Generation Machines for Long Hole Drilling in Rocks), B.F. Simonov (Ed.), Integr. Proekty SO RAN, 2013, issue43.
Smolyanitsky, B.N., Oparin, V.N., Denisova, E.V., Kondratenko, A.S., Tishchenko, I.V., Smolentsev, A.S., Khmelinin, A.P., and Konurin, A.I., Sovremennye tekhnologii sooruzheniya protyazhennykh skvazhin i tekhnicheskie sredstva kontrolya ikh traektorii (Modern Long Hole Drilling Technologies and Drilling Trajectory Control Facilities), Novosibirsk: SO RAN, 2016.
Kondratenko, A.S., Timonin, V.V., and Patutin, A.V., Prospects for Directional Drilling in hard Rocks, J. Min. Sci., 2016, vol. 52, no. 1, pp. 129–134.
Gurkov, K.S., Klimashko, V.V., Kostylev, A.D., Plavskikh, V.D., Rusin, E.P., Smolyanitsky, B.N., Tupitsyn, K.K., and Chepurnoi, N.P., Pnevmoproboiniki (Air Hammer Drills), Novosibirsk: SO RAN, 1990.
Kondratenko, A.S., Timonin, V.V., Abirov, A.A., Gosmanov, M.K., Esenov, B.U., and Zharkenov, E.B., Safe Trenchless Horizontal and Inclined Hole-Making Technology, Vestn. KuzGTU, 2014, no. 1, pp. 40–44.
Aleksandrova, N.I., Numerical–Analytical Investigation into Impact Pipe Driving in Soil with Dry Friction. Part I: Nondeformaable External Medium, J. Min. Sci., 2012, vol. 48, no. 5, pp. 856–869; Part II: Deformable External Medium, J. Min. Sci., 2013, vol. 49, no. 3, pp. 412–425.
Meskele, T. and Stuedlein, A.W., Hammer-Pipe Energy Transfer Efficiency for Pipe Ramming, Proc. NoDig 2013, North American Society for Trenchless Technology, Sacramento, California.
Meskele, T. and Stuedlein, A.W., Drivability Analyses for Pipe-Ramming Installations, Journal of Geotechnical and Geoenvironmental Engineering, 2015, Oregon State Univ., Corvallis, OR.
Danilov, B.B. and Smolyanitsky, B.N., Methods to Gain Better Efficiency of Driving Steel Pipes into the Ground by the Pneumatic Hammers, J. Min. Sci., 2005, vol. 41, no. 6, pp. 566–572.
Kondratenko, A.S. and Petreev, A.M., Features of the Earth Core Removal from a Pipe under Combined Vibro-Impact and Static Action, J. Min. Sci., 2008, vol. 44, no. 6, pp. 559–568.
Kondratenko, A.S. and Petreev, A.M., RF patent no. 2501913, Byull. Izobret., 2013, no.35.
Danilov, B.B., Smolyanitsky, B.N., and Sher, E.N., Determination of Conditions for Compressed Air-Assisted Removal of Plastic Soil in Horizontal Pipeline in Drilling, J. Min. Sci., 2014, vol. 50, no. 3, pp. 484–490.
Gerts, E.V., Dinamika pnevmaticheskikh sistem mashin (Dynamics of Compressed-Air Systems of Machines), Moscow: Mashinostroenie, 1985.
Iosilevich, G.B., Prikladnaya mekhanika: ucheb. dlya mashinostroit. spets. vuzov (Applied Mechanics: Textbook for Specialized Machine Engineering Universitites), Moscow: Mashinostroenie, 1989.
Fateev, N.T., Sergeev, S.V., Karyakin, V.F., Gapon, S.V., and Shchetinin, O.V., Directional Hydraulic Fracturing for Construction of Enclosing Structures in Rocks, GIAB, 2008, no. 1, pp. 260–264.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © B.B. Danilov, A.S. Kondratenko, B.N. Smolyanitsky, A.S. Smolentsev, 2017, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2017, No. 3, pp. 57–64.
Rights and permissions
About this article
Cite this article
Danilov, B.B., Kondratenko, A.S., Smolyanitsky, B.N. et al. Improvement of Pipe Pushing Method. J Min Sci 53, 478–483 (2017). https://doi.org/10.1134/S1062739117032391
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739117032391