Abstract
Procedures for calculating permissible length and capacity of a fully mechanized production heading with regard to gas content and considering nonuniform air flow across and along longwall are described. Nonlinear relations are derived for methane concentrations and air leakage into mined-out area. It is proposed to assess a production heading capacity based on the gas-related permissible length of the heading and the coal cutting chart with a shearer. It is found that the increased gas content of coal and higher air leakage into mined-out area results in reduction of gas-related length and capacity of production headings.
Similar content being viewed by others
References
Reznikov, E.L., Appropriate Efforts, Ugol’ Kuzbassa, 2013, no. 6.
Ermolaev, A.M., Egorov, P.V., and Ermolaev, A.A., Distribution of Ultimate Gas-Nonhazardous Capacity of Production Headings in Super Gas-Hazardous Mines, Ugol’, 2006, no. 11.
Slastunov, S.I., Karkashadze, G.G., Kolikov, K.S., and Ermak, G.P., Calculation Procedure for Permissible Coal Breakage Face Output by Gas Factor, J. Min. Sci., 2013, vol. 49, no. 6, pp. 888–893.
Rukovodstvo po proektirovaniyu ventilyatsii ugol’nykh shakht (Manual on Coal Mine Ventilation Design), Makeevka–Donbass, 1989.
Rukovodstvo po proektirovaniyu ventilyatsii ugol’nykh shakht (Manual on Coal Mine Ventilation Design), Kiev, 1994.
Rukovodstvo po proektirovaniyu ventilyatsii ugol’nykh shakht (Manual on Coal Mine Ventilation Design), Moscow, 2010.
Instruktsiya po primeneniyu skhem provetrivaniya vyemochnykh uchastkov shakht s izolirovannym otvodom metana iz vyrabotannogo prostranstva s pomoshch’yu gazootsasyvayushchikh ustanovok (Guidelines on Mine Ventilation Charts with Isolated Methane Removal from Mined-Out Area Using Gas- Suction Plants), Approved by the Federal Environmental, Industrial and Nuclear Supervision Service of the Russian Federation, Order no. 680 as of Dec 1, 2011.
Grashchenkov, N.F., Petrosyan, A.E., Frolov, M.A. et al., Rudnichnaya ventilyatsiya: spravochnik (Mine Ventilation: Quick Reference), K.Z. Ushakov (Ed.), Moscow: Nedra, 1988.
Timoshenko, A.M., Baranova, N.N., Nikiforov, D.V. et al., Some Aspects of Using Regulatory Documents in Planning of High-Capacity Production Areas in Coal Mines, Vest. NTs VostNII, 2010, no. 1.
Pravila bezopasnosti v ugol’nykh shakhtakh (Coal Mine Safety Regulations), Federal Mining and Industrial Supervision of the Russian Federation, Decree no. 50 as of Jun 5, 2003.
Ordin A.A. and Metel’kov, A.A., Optimization of the Fully Mechanized Stoping Face Length and Efficiency in a Coal Mine, J. Min. Sci., 2013, vol. 49, no. 2, pp. 254–264.
Ordin, A.A. Nikol’sky, A.A., and Metel’kov, A.A., Modeling and Optimization of Preparatory Work and Stoping in a Coal Mine Panel, J. Min. Sci., 2013, vol. 49, no. 6, pp. 941–949.
Ordin, A.A. Nikol’sky, A.A., and Metel’kov, A.A., Optimizatsiya tekhnologii podzemnoi razrabotki pologikh ugol’nykh plastov. Osnovnye zavisimosti i zakonomernosti mekhanizirovannoi dobychi uglya v dlinnykh ochistnykh zaboyakh (Optimization of Underground Mining Technology for Gently Dipping Coal. Basic Relations and Mechanisms of Coal Longwalling), Saarbrucken: Palmarium Academic Publishing, 2013.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Ordin, A.M. Timoshenko, S.A. Kolenchuk, 2014, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2014, No. 6, pp. 116–124.
Rights and permissions
About this article
Cite this article
Ordin, A.A., Timoshenko, A.M. & Kolenchuk, S.A. Ultimate length and capacity of production heading with regard to gas content, considering nonuniform air flow. J Min Sci 51, 771–778 (2015). https://doi.org/10.1134/S1062739115040140
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739115040140