Abstract
The problem of rock abrasiveness testing consists in the incompatibility of data obtained using different methods. To this effect, the author offers a method for qualitative evaluation of potential abrasiveness of rocks using their physico-mechanical properties arranged on the canonical scale of structure-and-hierarchy representation.
Similar content being viewed by others
References
Shreiner, L.A., Mekhanicheskie i abrazivnye svoistva gornykh porod (Mechanical Properties and Abrasiveness of Rocks), Moscow: Gostoptekhizdat, 1958.
Baron, L.I. and Kuznetsov, V.A., Abrazivnost’ gornykh porod pri dobyvanii (Rock Abrasiveness in Cutting), Moscow: AN SSSR, 1961.
Lyubimov, N.I., Printsipy klassifikatsii i effektivnogo razrusheniya gornykh porod pri razvedochnom burenii (Principles of Classification and Efficient Destruction of Rocks in Exploration Drilling), Moscow: Nedra, 1967.
Spivak, A.I., Abrazivnost’ gornykh porod (Rock Abrasiveness), Moscow: Nedra, 1972.
Abramson, M.G., Baidyuk, B.M., Zavaretsky, V.S., et al., Spravochnik po mekhanicheskim i abrazivnym svoistvam gornykh porod neftyanykh i gazovykh mestrorozhdenii (Reference Book on Mechanical Properties and Abrasiveness of Rocks in Oil and Gas Reservoirs), Moscow: Nedra, 1985.
Brown, E.T., Rock Characterization, Testing and Monitoring. ISRM Suggested Methods, International Society for Rock Mechanics, Oxford, Pergamon Press, 1981.
West, G., Rock Abrasiveness Testing for Tunnelling, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1989, vol. 26, no. 2.
Ewendt, G., Erfassung der Gesteinsabrasivitat und Prognose des Werkzeugverschleißes beim maschinellen Tunnelvortrieb mit Diskenmeißeln, Bochumer geol. u. geot. Arbeiten, 1989, 33.
Plinninger, R., Kasling, H., and Thuro, K., Wear Prediction in Hardrock Excavation Using the Cerchar Abrasiveness Index (CAI), Proc. Eurock 2004 & 53rd Geomechanics Colloquium, 2004.
Rostami, J., Ozdemir, L., Bruland, A., and Dahl, F., Review of Issues Related to Cerchar Abrasiveness Testing and Their Implications on Geotechnical Investigations and Cutter Cost Estimates, Proc. ETC, 2005.
Artsimovich, G.V., Mekhanofizicheskie osnovy sozdaniya porodorazrushayushchego burovogo instrumenta (Mechanophysical Basis for Rock-Destructive Drilling Tool), Novosibirsk: Nauka, 1985.
Shtumpf, G.G., Ryzhkov, Yu.A., Shalamanov, V.A., and Petrov, A.I., Fiziko-tekhnicheskie svoistva gornykh porod i uglei Kuznetskogo basseina (Physico-Technical Properties of Rocks and Coal in the Kuznetsk Basin), Moscow: Nedra, 1994.
Bieniawski, Z.T., Engineering Classification of Jointed Rock Masses, Trans. South African Institute Civil Engineering, 1973, vol. 15.
Shemyakin, E.I., Kurlenya, M.V., Oparin, V.N., Reva, V.N., Glushikhin, F.P., and Rozenbaum, M.A., USSR Discovery no. 400, Byull. Izobret., 1992, no. 1.
Oparin, V.N. and Tanaino, A.S., Kanonicheskaya shkala ierarkhicheskikh predstavlenii v gornom porodovedenii (Canonical Representation Scale for Hierarchies in the Science on Rocks), Novosibirsk: Nauka, 2011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Tanaino, 2014, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2014, No. 6, pp. 87–95.
Rights and permissions
About this article
Cite this article
Tanaino, A.S. Rock abrasiveness testing. J Min Sci 51, 88–94 (2015). https://doi.org/10.1134/S1062739115010123
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739115010123