Abstract
We present the results of comparing the defect sensitivity of various informative parameters of signals obtained during the implementation of the electromagnetic-acoustic mirror-shadow multiple reflections method. It is proposed to use statistical parameters of signals in the time and spectral domains as informative parameters. The unambiguous connection of the majority of informative parameters with a generalized defect characteristic defined as the product of the defect depth by its diameter is shown. The possibility of evaluating the generalized characteristic for the identified natural defects of bar rolled products is shown.
Similar content being viewed by others
REFERENCES
Filippov, A.A., Pachurin, G.V., Kuzmin, N.A., Nuzhdina, T.V., and Goncharova, D.A., Preparation of structural-mechanical properties of pearlitic steels for cold forming, Remont. Vosstanovleniye. Modernizatsiya., 2019, no. 11, pp. 38–42. https://doi.org/10.31044/1684-2561-2019-0-11-38-42
Filippov, A.A., Pachurin, G.V., Kuz’min, N.A., Matveev, Yu.I., and Deev, V.B., Quality of rolled steel for cold bulk stamping, Steel in Transl., 2018, vol. 48, no. 7, pp. 430–434. https://doi.org/10.3103/S0967091218070070
Naumenko, V.V., Muntin, A.V., Danilenko, A.V., and Baranova, O.A. Study of the Surface Defect Nature of Hot-Rolled Products in the Edge Zone, Steel in Transl., 2020, vol. 50, no. 1, pp. 46–52. https://doi.org/10.3103/S0967091220010088
Zhukov, D.V. and Belov, M.L., Methods for detecting specific defects in steels with high machinability by cutting, Stal’, 2018, no. 8, pp. 37–39.
Ding, H., Zhang, A.B., Qi, D.T., Li, H.B., Qi, G.Q., Ding, N., Bai, Z.Q., Fan, L., and Ge, P.L., Failure analysis of a sucker rod fracture in an oilfield, Eng. Failure Anal., 2020, vol. 109, p. 104300. https://doi.org/10.1016/j.engfailanal.2019.104300
Khlybov, O.S., Khrameshin, D.V., and Kabakov, Z.K., Diagnostic and automatic adjustment algorithms for a nondestructive statistical monitoring system for the mechanical properties of hot-rolled metal stock, Metallurgist, 2018, vol. 62, pp. 627–633. https://doi.org/10.1007/s11015-018-0701-3
Bida, G.V., Nondestructive testing of mechanical properties of rolled steel (a review): 2. Testing of ductile properties, Russ. J. Nondestr. Test., 2005, vol. 41, no. 5, pp. 307–323.
Duminova, N.S., Kornilov, V.L., Urtsev, V.N., Voronkov, S.N., and Sidorenko, N.S., Certification of Mill 5000 (PJSC “MMK”) rolled flat products by nondestructive control methods, Metallurgist, 2019, vol. 62, nos. 11–12, pp. 1219–1224. https://doi.org/10.1007/s11015-019-00777-z
Dimkin, G.Y., Shevelev, A.V., Kurkov, A.V., and Smorodinskii, Y.G., On the sensitivity of eddy current testing of parts of railway rolling stock, Russ. J. Nondestr. Test., 2019, vol. 55, no. 8, pp. 610–616. https://doi.org/10.1134/S1061830919080059
Shejuan, X., Mingming, T., Pan, X., Cuixiang, P., Zhenmao, C., and Toshiyuki, T., A hybrid nondestructive testing method of pulsed eddy current testing and electromagnetic acoustic transducer techniques for simultaneous surface and volumetric defects inspection, NDT & E Int., 2017, vol. 86, pp. 153–163. https://doi.org/10.1016/j.ndteint.2016.12.006
Zima, B. and Rucka, M., Guided ultrasonic waves for detection of debonding in bars partially embedded in grout, Constr. Build. Mater., 2018, vol. 168, pp. 124–142. https://doi.org/10.1016/j.conbuildmat.2018.02.107
Saravanan, T.J., Elastic wave methods for non-destructive damage diagnosis in the axisymmetric viscoelastic cylindrical waveguide, Measurement, 2021, vol. 177, p. 109253. https://doi.org/10.1016/j.measurement.2021.109253
Alves, M., Melo, M., Medeiros, L.H., Novo, L., Barbosa, D., Coutinho, M., Tarragô, V., Santos, R., Neto, H., and Gama, P., Nondestructive technique for fault locating on anchor rods by reflectometry, SBMO/IEEE MTT-S Int. Microwave Optoelectron. Conf. (IMOC) (Fortaleza, 2021), pp. 1–3. https://doi.org/10.1109/IMOC53012.2021.9624761
Majhi, S., Mukherjee, A., George, N.V., and Uy, B., Corrosion detection in steel bar: a time-frequency approach, NDT & E Int., 2019, vol. 107, p. 102150. https://doi.org/10.1016/j.ndteint.2019.102150
Zhao, J., Durham, N., Abdel-Hadi, K., McKenzie, C.A., and Thomson, D.J., Acoustic guided wave techniques for detecting corrosion damage of electrical grounding rods, Measurement, 2019, vol. 147, p. 106858. https://doi.org/10.1016/j.measurement.2019.106858
Li, Z., Wang, Y., Zheng, J., Liu, N., Li, M., and Teng, J., Stress measurement for steel slender waveguides based on the nonlinear relation between guided wave group velocity and stress, Measurement, 2021, vol. 179, p. 109465. https://doi.org/10.1016/j.measurement.2021.109465
Strizhak, V.A., Khasanov, R.R., and Pryakhin, A.V., Features of excitation of an electromagnetic acoustic transducer under a waveguide method of testing, Vestnik IzhGTU imeni M.T. Kalashnikova, 2018, vol. 21, no. 2, pp. 159–166. https://doi.org/10.22213/2413-1172-2018-2-159-166
Hirao, M. and Ogi, H., Electromagnetic Acoustic Transducers: Noncontacting Ultrasonic Measurements Using EMATs, Tokyo: Springer Japan, 2017.
Aleshin, N.P., Kris’ko, N.V., Kusii, A.G., Skrinnikov, S.V., Mogil’ner, L.Yu., Investigating the detectability of surface volumetric defects in ultrasonic testing with the use of Rayleigh waves generated by an electromagnetic-acoustic transducer, Russ. J. Nondestr. Test., 2021, vol. 57, no. 5, pp. 361–368. https://doi.org/10.1134/S1061830921050028
Babkin, S.E., Definition of speed of the basic types acoustic waves in metals by means added sensor, Defektoskopiya, 2020, no. 4, pp. 32–39. https://doi.org/10.31857/S0130308220040041
Murav’eva, O., Murav’ev, V., Volkova, L., Kazantseva, N., Nichipuruk, A., and Stashkov, A., Acoustic properties of low-carbon 2% Mn-doped steel manufactured by laser powder bed fusion technology, Addit. Manuf., 2022, vol. 51, p. 102635. https://doi.org/10.1016/j.addma.2022.102635
He, C., Deng, P., Lu, Y., Liu, X., Liu, Z., Jiao, J., and Wu, B., Estimation of surface crack depth using Rayleigh waves by electromagnetic acoustic transducers, Int. J. Acoust. Vib., 2017, vol. 22, no. 4, pp. 541–548. https://doi.org/10.20855/ijav.2017.22.4501
Wang, P., Zhang, Y., Yao, E., Mi, Y., Zheng, Y., and Tang, Ch., Method of measuring the mechanical properties of ferromagnetic materials based on magnetostrictive EMAT characteristic parameters, Measurement, 2021, vol. 168, p. 108187. https://doi.org/10.1016/j.measurement.2020.108187
Cong, M., Wu, X., and Qian, C., A longitudinal mode electromagnetic acoustic transducer (EMAT) based on a permanent magnet chain for pipe inspection, Sensors, 2016, vol. 16, no. 5, p. 740. https://doi.org/10.3390/s16050740
Dehui, W., Jiaxin, Y., Wenxiong, Ch., and Teng, W., An electromagnetic acoustic transducer with electromagnetic pulse restraining, Insight Nondestr. Test. Cond. Monit., 2021, vol. 63, pp. 111–117. https://doi.org/10.1784/insi.2021.63.2.111
Petrov, K.V., Sokov, M.Yu., and Murav’eva, O.V., The effect of electromagnetic acoustic transducer design features on results of cylinder object testing, Vestnik IzhGTU imeni M.T. Kalashnikova, 2018, vol. 21, no. 2, pp. 135–146. https://doi.org/10.22213/2413-1172-2018-2-135-146
Muraveva O. V., Murav'ev V. V., Basharova A. F., Sintsov M.A., Bogdan O.P. Thermal treatment effect and structural state of rod-shaped assortment 40Kh steel on the speed of ultrasound waves and poisson coefficient, Steel in Transl., 2020, vol. 50, no 8, pp. 579–584. https://doi.org/10.3103/S0967091220080082
Murav’eva, O.V. and Zorin, V.A., The multiple shadow method applied to testing cylindrical objects with Rayleigh waves, Russ. J. Nondestr. Test., 2017, vol. 53, no. 5, pp. 337–342. https://doi.org/10.1134/S1061830917050059
Murav'ev, V.V., Murav’eva, O.V., Budrin, A.Yu., Sintsov, M.A., and Zorin, A.V., Acoustic structural analysis of steel samples loaded with rotational bending during fatigue tests, Vestnik IzhGTU imeni M.T. Kalashnikova, 2019, vol. 22, no. 1, pp. 37–44. https://doi.org/10.22213/2413-1172-2019-1-37-44
Klyuev, V.V., Nerazrushayuschii kontrol’. T. 3. Ul’trazvukovoi kontrol’ (Nondestructive Testing. Vol. 3. Ultrasonic Testing), Moscow: Mashinostroenie, 2004.
Kachanov, V.K., Sokolov, I.V., Pervushin, V.V., and Timofeev, D.V., Structure analysis of products made of polymer materials using instantaneous spectra of ultrasonic signals, Russ. J. Nondestr. Test., 2019, vol. 55, no. 6, pp. 427–433. https://doi.org/10.1134/S1061830919060056
Suchkov, G.M., Migushchenko, R.P., Kropachek, O.Yu., Plesnetsov, S.Yu., Bilyk, Z.V., Khoroshailo, Yu.E., Efimenko, S.A., and Salam, B., Nonсontact spectral express method for detecting corrosion damage to metal products, Russ. J. Nondestr. Test., 2020, vol. 56, no. 1, pp. 12–19. https://doi.org/10.1134/S1061830920010118
Erofeev, V.I., Ilyakhinskii, A.V., Nikitina, E.A., Pakhomov, P.A., and Rodyushkin, V.M., Ultrasonic sensing method for evaluating the limit state of metal structures associated with the onset of plastic deformation, Phys. Mesomech., 2020, vol. 23, pp. 241–245. https://doi.org/10.1134/S102995992003008X
Khlybov, A.A. and Uglov, A.L., On the Use of structural noise parameters in testing 20GL steel with Rayleigh surface waves under elastoplastic deformation, Russ. J. Nondestr. Test., 2021, vol. 57, no. 7, pp. 517–524. https://doi.org/10.1134/S1061830921070081
Murav’ev, V.V., Murav’eva, O.V., and Bayteryakov, A.V., Structurally sensitive acoustic parameters of structural steels (Structural-Sensitive Acoustic Parameters of Structural Steels) Izhevsk: IzhGTU, 2020.
Khlybov, A.A., Kabaldin, Yu.G., Anosov, M.S., Ryabov, D.A., Shatagin, D.A., and Kiselev, A.V., Estimation of possibilities of using fractal dimension and information entropy of elastic waves for assessment of damage to steel 20 at low cycle fatigue, Vestnik IzhGTU imeni M.T. Kalashnikova, 2021, vol. 24, no. 3, pp. 17–25. https://doi.org/10.22213/2413-1172-2021-3-17-25
García-Gómez, J., Gil-Pita, R., Rosa-Zurera, M., Romero-Camacho, A., Jiménez-Garrido, J.A., and García- Benavides, V., Smart sound processing for defect sizing in pipelines using EMAT actuator based multi-frequency Lamb waves, Sensors, 2018, vol. 18, no. 3, p. 802. https://doi.org/10.3390/s18030802
Bazulin, E.G. and Evseev, I.V., Applying plane wave imaging technology in ultrasonic nondestructive testing, Russ. J. Nondestr. Test., 2021, vol. 57, no. 6, pp. 423–436. https://doi.org/10.1134/S1061830921060048
Potapov, A.I., Kondrat’ev, A.V., and Smorodinskii, Ya.G., Nondestructive testing of structurally inhomogeneous composite materials by the method of elastic-wave velocity hodograph, Russ. J. Nondetsr. Test., 2019, vol. 55, no. 6, pp. 434–442. https://doi.org/10.1134/S106183091906007X
Sudheera, K., Nandhitha, N.M., V. Paineni Bhavagna Venkat Sai, and Nallamothu Vijay Kumar, Deep learning techniques for flaw characterization in weld pieces from ultrasonic signals, Russ. J. Nondestr. Test., 2020, vol. 56, no. 10, pp. 820–830. https://doi.org/10.31857/S013030822010005X
Gao, X., Shi, Y., Du, K., Zhu, Q., and Zhang, W., Sparse blind deconvolution with nonconvex optimization for ultrasonic NDT application, Sensors, 2020, vol. 20, p. 6946. https://doi.org/10.3390/s20236946
Shi, Y., Xu, W., Zhang, J., and Li, X., Automated Classification of Ultrasonic Signal via a Convolutional Neural Network, Appl. Sci., 2022, vol. 12, p. 4179. https://doi.org/10.3390/app12094179
Murav’eva, O.V., Murav’ev, V.V., Gabbasova, M.A. Buldakova I.V. and Sokov M.Y. Analysis of reflected signals in testing cylindrical specimens by the multiple reflection echo-shadow method. Optoelectron. Instrument. Proc., 2016, vol. 52, no. 4, pp. 367–373 (2016). https://doi.org/10.3103/S8756699016040087
Murav’ev, V.V., Murav’eva, O.V., Strizhak, V.A., Pryakhin, A.V., and Fokeeva, E.N., An analysis of the comparative reliability of acoustic testing methods of bar stock from spring steels, Russ. J. Nondestr. Test., 2014, vol. 50, no. 8, pp. 435–442. https://doi.org/10.1134/S1061830914080063
Petrov, K.V., Murav’eva, O.V., Mishkin, Yu.V., and Basharova, A.F., Modeling magnetic, electric, and acoustic fields of a pass-through transducer when testing cylindrical objects, Russ. J. Nondestr. Test., 2019, no. 2, pp. 102–110.
Funding
This work was supported by the Russian Science Foundation, project no. 22-19-00252, https://rscf.ru/project/22-19-00252/, and made use of the USI (Unique Scientific Installation) “Information and measurement complex for studying the acoustic properties of materials and products” (reg. no. 586308).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Murav’eva, O.V., Brester, A.F. & Murav’ev, V.V. Comparative Sensitivity of Informative Parameters of Electromagnetic-Acoustic Mirror-Shadow Multiple Reflections Method during Bar Stock Testing. Russ J Nondestruct Test 58, 689–704 (2022). https://doi.org/10.1134/S1061830922080083
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830922080083