Skip to main content
SpringerLink
Log in

Structural Sensitivity of the Parameters of Asymmetric “Coercive Return–Magnetization” Cycle in Heat-Treated Low-Carbon Steels

  • Electromagnetic Methods
  • Published:
Russian Journal of Nondestructive Testing Aims and scope Submit manuscript

Abstract

It has been shown both theoretically and experimentally that as the tempering temperature of quenched low-carbon steels increases up 600–650°C, the values of induction on the asymmetric “coercive return–magnetization” cycle decrease monotonically at fixed, proportional to the coercive force, values of magnetic field. This effect is associated with a transition from structures with a uniaxial magnetic anisotropy (after quenching) to structures with three easy-magnetization axes (after hightemperature tempering). Within the model of prevailing 180° displacements, numerical estimates have been produced for the magnetic parameters of the “coercive return–magnetization” cycle in these magnetic structures. The estimates are in a good agreement with experimental data. It is shown that induction resulting from the inversion (polarity switching) of coercive field exhibits a structural sensitivity that is similar to that demonstrated by coercive-return magnetization and is therefore a promising parameter for magnetic structural analysis. It has been demonstrated that the proposed parameter can be measured locally using the DIUS-1.15M mobile hardware-software system.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Vonsovskii, S.V. and Mikheev, M.N., Magnetic structural analysis, Zavod. Lab., 1957, no. 10, pp. 1221–1226.

    Google Scholar 

  2. Förster, F. and Stumm, W., Application of magnetic and electromagnetic nondestructive test method for measuring physical and technological material values, Mater. Eval., 1975, vol. 33, no. 1, pp. 5–15.

    Google Scholar 

  3. Mel’gui, M.A., Magnitnyi kontrol’ mekhanicheskikh svoistv stalei (Magnetic Testing of Mechanical Properties of Steels), Minsk: Nauka i Tekhnika, 1980.

    Google Scholar 

  4. Shcherbinin, V.E. and Gorkunov, E.S., Magnitnye metody strukturnogo analiza i nerazrushayushchego kontrolya (Magnetic Methods of Structural Analysis and Nondestructive Testing) Yekaterinburg: Ural Branch, Russ. Acad. Sci., 1996.

    Google Scholar 

  5. Kostin, V.N., Sazhina, E.Yu., Stashkov, A.N., and Tsar’kova, T.P., Relation between the residual magnetization and change in magnetization on steel and alloy return curves, Russ. J. Nondestr. Test., 2001, vol. 37, no. 12, pp. 864–871.

    Article  Google Scholar 

  6. Kostin, V.N., Somova, V.M., and Tsar’kova, T.P., Magnetic properties of heat-treated steels after dynamic and static demagnetization, Russ. J. Nondestr. Test., 2008, vol. 44, no. 10, pp. 690–699.

    Article  Google Scholar 

  7. Kostin, K.V., Kostin, V.N., Smorodinskii, Ya.G., Tsar’kova, T.P., Somova, V.M., and Sazhina, E.Yu., Choice of the parameters and algorithm for the magnetic hardness testing of thermally treated carbon steels by the method of regression modeling, Russ. J. Nondestr. Test., 2011, vol. 47, no. 2, pp. 89–95.

    Article  Google Scholar 

  8. Sandomirskii, S.G., Analysis of the structural and phase sensitivity of coercive force of hysteresis subloops in steels, Metally, 2014, no. 2, pp. 37–43.

    Google Scholar 

  9. Sandomirskii, S.G., Analysis of the structural and phase sensitivity of the maximum differential magnetic susceptibility of steels, Metally, 2016, no. 4, pp. 45–51.

    Google Scholar 

  10. Kostin, V.N. and Vasilenko, O.N., Local measurement of the coercive-return induction in the presence of a gap in the transducer-object combined circuit, Russ. J. Nondestr. Test., 2012, vol. 48, no. 7, pp. 391–400.

    Article  Google Scholar 

  11. https://doi.org/www.magnet-physik.de

  12. Kostin V.N., Vasilenko, O.N., and Byzov A.V., DIUS-1.15M Mobile hardware–software structuroscopy system, Russ. J. Nondestr. Test., 2018, vol. 54, no. 9.

    Google Scholar 

  13. Novikov, I.I., Teoriya termicheskoi obrabotki metallov (Theory of Heat Treatment of Metals), Moscow: Metallurgiya, 1978.

    Google Scholar 

  14. Schastlivtsev, V.M., Mirzaev, D.A., and Yakovleva, I.L., Struktura termicheski obrabotannoi stali (Structure of Heat-Treated Steel), Moscow: Metallurgiya, 1994.

    Google Scholar 

  15. Chikazumi, S., Physics of Ferromagnetism, Oxford Univ. Press, 1997, 2nd Ed.

    Google Scholar 

  16. Vonsovskii, S.V. and Shur, Ya.S., Ferromagnetizm (Ferromagnetism), Moscow-Leningrad: OGIZ-Gostekhizdat, 1948.

    Google Scholar 

  17. Krinchik, G.S., Fizika magnitnykh yavlenii (Physics of Magnetic Phenomena) Msocow: Moscow State Univ., 1985.

    Google Scholar 

  18. Kostin, V.N., Certain laws of irreversible change in the magnetization of polycrystalline ferromagnets, Russ. J. Nondestr. Test., 2004, vol. 40, no. 1, pp. 21–28.

    Article  Google Scholar 

  19. Gorkunov, E.S., Somova, V.M., and Buldakova, N.B., Comparison of reversible and irreversible processes during magnetization and magnetization reversal in heat-treated steels, Defektoskopiya, 1988, no. 1, pp. 51–59.

    Google Scholar 

  20. Kostin, K.V., Tsar’kova, T.P., Nichipuruk, A.P., and Smorodinskii, Ya.G., Measurement of the hysteresis characteristics of pipe steels under elastic and plastic tensile strain, Russ. J. Nondestr. Test., 2011, vol. 47, no. 9, pp. 593–602.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Mikheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, Yekaterinburg, 620108, Russia

    V. N. Kostin & O. N. Vasilenko

  2. Ural Federal University, Yekaterinburg, 620002, Russia

    V. N. Kostin & O. N. Vasilenko

  3. Joint Institute of Mechanical Engineering, National Academy of Sciences of Belarus, Minsk, 220072, Belarus

    S. G. Sandomirskii

Authors
  1. V. N. Kostin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. O. N. Vasilenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. G. Sandomirskii
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. N. Kostin.

Additional information

Original Russian Text © V.N. Kostin, O.N. Vasilenko, S.G. Sandomirskii, 2018, published in Defektoskopiya, 2018, No. 11, pp. 36–42.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kostin, V.N., Vasilenko, O.N. & Sandomirskii, S.G. Structural Sensitivity of the Parameters of Asymmetric “Coercive Return–Magnetization” Cycle in Heat-Treated Low-Carbon Steels. Russ J Nondestruct Test 54, 776–783 (2018). https://doi.org/10.1134/S1061830918110050

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1061830918110050

Keywords

Search

Navigation