Abstract
The increasing application of automotive aerospace materials, such as Magnesium alloys and Aluminum alloys is challenging the joining processes of dissimilar metals and alloys. Friction Stir Welding (FSW) being one among the recent research novelty area on the material joining processes. This paper involves to study the influences of post weld treatment of Aluminum AA6061 and AZ61 through Non Destructive Testing (NDT) methods. The FSW butt joints are post weld heat treated with three different temperatures (100, 300 and 400°C) and aged for 1 hour, three hours and five hours periods. Its effects are analyzed by the study of eddy-current test, micro hardness evaluation and Scanning Electron Microscopy (SEM) analysis. The analysis infers that the aging period also plays a major role as that of temperature in the improvement of joint efficiency. A satisfactory correlation exists between the eddy-current test’s impedance values, micro hardness values and SEM analysis.
Similar content being viewed by others
References
Kumaraswami dhas, LA., Raguraman, D, Muruganadam, D, and Senthilkumar, B, Temperature prediction using finite element modelling on Friction Stir Welding of AA6061–AZ61, Indian J. Sci. Technol., 2015, vol. 8, no. 31, pp. 1–7.
Ulysse, P, Three-dimensional modeling of the friction stir-welding process, Int. J. Mach. Tools Manuf., 2002, vol. 42, no. 14, pp. 1549–1557.
Chen, CM. and Kovacevic, R, Finite element modeling of friction stir welding—thermal and thermomechanical analysis, Int. J. Mach. Tools Manuf., 2003, vol. 43, no. 13, pp. 1319–1326.
Song, M and Kovacevic, R, Thermal modeling of friction stir welding in a moving coordinate system and its validation, Int. J. Mach. Tools Manuf., 2003, vol. 43, no. 6, pp. 605–615.
Vijay Soundararajan, Srdja Zekovic, and Radovan Kovacevic, Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061, Int. J. Mach. Tools Manuf., 2005, vol. 45, no. 14, pp. 1577–1587.
Heurtier, P, Jones, MJ., Desrayaud, C, Driver, JH., Montheillet, F, and Allehaux, D, Mechanical and thermal modelling of Friction Stir Welding, J Mater. Process. Technol., 2006, vol. 171, no. 3, pp. 348–357.
Muruganandam, D, Raguraman, D, Senthilkumar, B, and Susil Lal Das, FSW of Aluminium alloys—Energy model for taper tool geometry, Elixir Mech. Engg., 2013, vol. 65, pp. 19864–19872.
Ahmed Ramadan Shaaban Essa, Mohamed Mohamed Zaky Ahmed, Abdel-Karim Yousif Ahmed Mohamed, and Ahmed Essa El-Nikhaily, An analytical model of heat generation for eccentric cylindrical pin in friction stir welding, J Mater. Res. Technol., 2016, vol. 5, no. 3, pp. 234–240.
Raguraman, D, Muruganandam, D, and Kumaraswami dhas, LA., Influence of weld parameters on friction stir welding of AA6061–AZ61, Int. J. Pharm. Technol., 2015, vol. 7, no. 3, pp. 9600–9609.
Zhao, MS., Chiew, SP., and Lee, CK., Post weld heat treatment for high strength steel welded connections, J Constr. Steel Res., 2016, vol. 122, pp. 167–177.
Wu, YE. and Wang, YT., Enhanced SCC resistance of AA7005 welds with appropriate filler metal and postwelding heat treatment, Theor. Appl. Fract. Mech., 2010, vol. 54, no. 1, pp. 19–26.
Hakan Aydın, Ali Bayram, and Ismail Durgun, The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir welded joints, Mater. Des., 2010, vol. 31, no. 5, pp. 2568–2577.
Cerri, E and Leo, P, Mechanical properties evolution during post-welding-heat treatments of double-lap Friction Stir Welded joints, Mater. Des., 2011, vol. 32, no. 6, pp. 3465–3475.
Thirumalvalavan, S, Senthil, R, and Gnanavelbabu, A, Effect of heat treatment on tensile strength, hardness and microstructure of AZ 61A magnesium alloy, Int. J. Metall. Mater. Sci. Eng., 2013, vol. 3, no. 4, pp. 39–48.
Chaitanya Sharma, Dheerendra Kumar Dwivedi, and Pradeep Kumar, Effect of post weld heat treatments on microstructure and mechanical properties of friction stir welded joints of Al–Zn–Mg alloy AA7039, Mater. Des., 2013, vol. 43, pp. 134–143.
Ehab A. El-Danaf and Magdy M. El-Rayes, Microstructure and mechanical properties of friction stir welded 6082 AA in as welded and post weld heat treated conditions, Mater. Des., 2013, vol. 46, pp. 561–572.
Sivaraj, P, Kanagarajan, D, and Balasubramanian, V, Effect of post weld heat treatment on tensile properties and microstructure characteristics of friction stir welded armour grade AA7075-T651 aluminium alloy, Def. Technol., 2014, vol. 10, no. 1, pp. 1–8.
Worapong Boonchouytan, Jaknarin Chatthong, Surasit Rawangwong, and Romadorn Burapa, Effect of Heat Treatment T6 on the Friction Stir Welded SSM 6061 Aluminum Alloys, Energy Procedia, 2014, vol. 56, pp. 172–180.
Muruganandam, D, Raguraman, D, and Kumaraswami dhas, LA., Effect of post-welding heat treatment on mechanical properties of butt FSW joints in high strength aluminium alloys, Indian J. Eng. Mater. Sci., 2015, vol. 22, no. 4, pp. 381–388.
Kimura, M, Fuji, A, and Shibata, S, Joint properties of friction welded joint between pure magnesium and pure aluminium with post-weld heat treatment, Mater. Des., 2015, vol. 85, pp. 169–179.
Vijaya Kumar, P, Madhusudhan Reddy, G, and Srinivasa Rao, K, Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone—Effect of post weld heat treatment and addition of boron carbide, Def. Technol., 2015, vol. 11, no. 2, pp. 166–173.
Vijaya Kumar, P, Madhusudhan Reddy, G, and Srinivasa Rao, K, Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds—Effect of post weld heat treatment, Def. Technol., 2015, vol. 11, no. 4, pp. 362–369.
Zhao, MS., Chiew, SP., and Lee, CK., Post weld heat treatment for high strength steel welded connections, J Constr. Steel Res., 2016, vol. 122, pp. 167–177.
Farahmand Nikoo, M, Azizi, H, Parvin, N, and Yousefpour Naghibi, H, The influence of heat treatment on microstructure and wear properties of friction stir welded AA6061-T6/Al2O3 nanocomposite joint at four different traveling speed, J Manuf. Process., 2016, vol. 22, pp. 90–98.
Mohammed Asif, M, Kulkarni Anup Shrikrishna, and Sathiya, P, Effects of post weld heat treatment on friction welded duplex stainless steel joints, J Manuf. Process., 2016, vol. 21, pp. 196–200.
Hong Ma, Guoliang Qin, Peihao Geng, Fei Li, Xiangmeng Meng, and Banglong Fu, Effect of post-weld heat treatment on friction welded joint of carbon steel to stainless steel, J Mater. Process. Technol., 2016, vol. 227, pp. 24–33.
Chen, X, Xie, FQ., Ma, TJ., Li, WY., and Wu, XQ., Effects of post-weld heat treatment on microstructure and mechanical properties of linear friction welded Ti2AlNb alloy, Mater. Des., 2016, vol. 94, pp. 45–53.
Avettand Fenoel, MN. and Taillard, R, Effect of a pre or post weld heat treatment on microstructure and mechanical properties of an AA2050 weld obtained by SSFSW, Mater. Des., 2016, vol. 89, pp. 348–361.
Davydov, VV., Myazin, NS., and Davydova, TI., A nondestructive method for express testing of condensed media in ecological monitoring, Russ. J. Nondestr. Test., 2017, vol. 53, no. 7, pp. 520–529.
Santos, T, Vilaca, P, and Quintino, L, Developments in NDT for detecting imperfections in friction stir welds in aluminium alloys, Weld. World, 2008, vol. 52, nos. 9–10, pp. 30–37.
Li, B, Shen, Y, and Hu, W, The study of defects in aluminium 2219-T6 thick butt friction stir welds with the application of multiple nondestructive testing methods, Mater. Des., 2011, vol. 32, no. 4, pp. 2073–2084.
Shcherbinin, SV., Safronov, AP., Krekhno, RV., and Beketova, AI., An automated system for measuring the impedance of polymer films, Russ. J. Nondestr. Test., 2017, vol. 53, no. 2, pp. 111–116.
Makarov, AV., Gorkunov, ES., Skorynina, PA., Kogan, LKh., Yurovskikh, AS., and Osintseva, AL., Eddycurrent control of the phase composition and hardness of metastable austenitic steel after different regimes of nano structuring frictional treatment, Russ. J. Nondestr. Test., 2016, vol. 52, no. 11, pp. 627–637.
Rosado, LS., Santos, TG., Piedade, M, Ramos, PM., and Vilaca, P, Advanced technique for non-destructive testing of friction stir welding of metals, J Meas., 2010, vol. 43, no. 8, pp. 1021–1030.
Kryukov, AS., Chegodaev, VV., Zhdanov, AG., and Lunin, VP., A Method for the determination of the volumes of arbitrarily spaced local defects during eddy current testing of cylindrical items by a multiunit probe, Russ. J. Nondestr. Test., 2015, vol. 51, no. 12, pp. 750–758.
Hu, B, Yu, R, and Zou, H, Magnetic non-destructive testing methods for thin—Plates aluminium alloys, NDT&E Int., 2012, vol. 47, pp. 66–69.
Egorov, AV. and Polyakov, VV., The application of principal-component analysis during eddy-current testing of aluminum alloys, Russ. J. Nondestr. Test., 2015, vol. 51, no. 10, pp. 633–638.
Dmitriev, SF., Katasonov, AO., Malikov, VN., and Sagalakov, AM., Flaw detection of alloys using the eddycurrent method, Russ. J. Nondestr. Test., 2016, vol. 52, no. 1, pp. 32–37.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Muruganandam, D. Influence of Post Weld Heat Treatment in Friction Stir Welding of AA6061 and AZ61 Alloy. Russ J Nondestruct Test 54, 294–301 (2018). https://doi.org/10.1134/S1061830918040095
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830918040095