Abstract
A new acoustic-emission diagnostics method in which there is no need to load an entire structure has been studied. This method of monitoring (as a conventional acoustic-emission method) is based on making a deformation of the tested surface; however in this case, the load is applied to a preliminarily chosen site of the tested object in the most dangerous area.
Similar content being viewed by others
References
Vinokurov, V.A., Operational and technological requirements for welded joints in terms of continuity, Svar. Proizvod., 1987, no. 6, pp. 27–30.
Ermolov, I.N., Aleshin, N.P., and Potapov, A.I., Nerazrushayushchii kontrol’. Tom 2. Akusticheskie metody kontrolya (Nondestructive Testing, vol. 2Acoustic Testing), Sukhorukov, V.V., Ed., Moscow: Vysshaya Shkola, 1991.
Konovalov, N.N., Normirovanie defektov i dostovernost’ nerazrushayushchego kontrolya svarnykh soedinenii (Regulation of Defects and Reliability of Non-Destructive Control of Welded Joints), Moscow Promyshlennaya Bezopasnost’, 2006.
Bol’shakov, A.M., Analysis of the damages and defects in gas pipelines and Northern storage tanks, Gazov. Prom-st, 2010, no. 5, pp. 52–53.
Bol’shakov, A.M. and Andreev, Ya.M., The nature of the defects and the types of storage tanks failure, operating in the North conditions, Gazov. Prom-st, 2012, no. 3, pp. 68–72.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Bol’shakov, Ya.M. Andreev, 2016, published in Defektoskopiya, 2016, No. 4, pp. 26–30.
Rights and permissions
About this article
Cite this article
Bol’shakov, A.M., Andreev, Y.M. A local method for loading a tested object during acoustic-emission diagnostics. Russ J Nondestruct Test 52, 206–211 (2016). https://doi.org/10.1134/S1061830916040021
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830916040021