Abstract
In this study, a combined computational and experimental method was developed in order to restore the thermal properties of materials. The method is based on the Levenberg-Marquardt algorithm for multi-dimensional optimization. It allows adjustment to maintain databases on materials for the simulation of casting technologies and the prediction of cast defects. The experiments were utilized under real conditions at the factory to test and verify the developed method.
Similar content being viewed by others
References
Ogorodnikova, O.M., Scientific research application of CAE software in CAD/CAE/CAM technologies, Vestnik mashinostroyeniya, 2012, no. 1, pp. 25–31.
Martynenko, S., Ogorodnikova, O., and Grusman, V., Application of computer methods to enhance the quality of large dimension thick-walled steel castings, Liteinoye proizvodstvo, 2009, no. 11, pp. 21–26.
Ogorodnikova, O.M. and Martynenko, S.V., Combined analysis of technological processes and load conditions of casting, Russ. Met. (Metally), 2012, no. 9, pp. 754–756.
Ogorodnikova, O.M., Simulation of defects and stresses in castings, Russ. J. Nondes. Testing, 2011, vol. 47, no. 8, pp. 568–575.
Ogorodnikova, O.M., About problems of integrating the Computational Materials Science into Digital Engineering, Inform. Technol. Design Manufacture, 2014, no. 2 (154), pp. 30–34.
Ogorodnikova, O.M., Stress-strain state of metal in the effective range of crystallization, Liteinoye proizvodstvo, 2012, no. 9, pp. 21–24.
Ogorodnikova, O.M., Accumulation of residual stresses in metal materials during cooling after solidification, Liteinoye proizvodstvo, 2014, no. 7, pp. 37–40.
Solntsev, Yu.P., Andreev, A.K., and Grechin, R.I., Cast Cold-Resistant Steels, M.: Metallurgy, 1991, p. 176.
Press, W.H., Teukolsky, S.A., Vetterling, W.T., and Flannery, B.P., Numerical Recipes. The Art of Scientific Computing, N.Y.: Cambridge University Press, 2007, p. 1262.
Bobrov, A.L. and Stepanova, L.N., Studying the parameters of acoustic emission signals during inspection of cast parts of a freight car truck, Russ. J. Nondes. Testing, 2013, vol. 49, no. 12, pp. 722–727.
Stepanova, L.N., Bekher, S.A., Boyarkin, E.V., and Moreva, N.A., A study of specimens from solebar material with boxlike cross sections using the acoustic-emission method, Russ. J. Nondes. Testing, 2013, vol. 49, no. 4, pp. 215–224.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.M. Ogorodnikova, S.V. Martynenko, 2015, published in Defektoskopiya, 2015, Vol. 51, No. 5, pp. 65–70.
The article was translated by the authors.
Rights and permissions
About this article
Cite this article
Ogorodnikova, O.M., Martynenko, S.V. Application of the Levenberg-Marquardt algorithm in computer simulation of cast defects. Russ J Nondestruct Test 51, 315–319 (2015). https://doi.org/10.1134/S1061830915050058
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830915050058