Abstract
It is shown here that it is possible to control the hardness of heat-treated steels of various chemical compositions, to control the quality of surface hardening, and to solve several other problems of magnetic structuroscopy using an IMA-M multiparameter structuroscope.
Similar content being viewed by others
References
Gorkunov, E.S., Surin, G.N., Nichipuruk, A.P., and Somova, V.M., Application of differential magnetic structuroscopes for testing composite materials, Mekh. Magn. Mater., 1982, no. 6, pp. 838–840.
Bida, G.V. and Stashkov, A.N., Multipurpose use of magnetic properties of steels in nondestructive testing of the quality of heat-treated workpieces, Russ. J. Nondestr. Test., 2003, vol. 39, pp. 310–316.
Shanaurin, A.M., Veksler, A.T., Nichipuruk, A.P., Bida, G.V., and Vatolin, S.M., SM-401 Magnetic Structuroscope, Russ. J. Nondestr. Test., 2002, vol. 38, pp. 431–437.
Nichipuruk, A.P., Bida, G.V., Shanaurin, A.M., and Stashkov, A.N., Functional possibilities of SM-401 magnetic structuroscope, Russ. J. Nondestr. Test., 2003, vol. 39, pp. 1–9.
Kostin, V.N. and Bida, G.V., The MS-2 magnetic structuroscope, Defektoskopiya, no. 2, pp. 21–24.
Kostin, V.N., Nichipuruk, A.P., Stashkov, A.N., and Osintsev, A.A., The SIMTEST hardware-software magnetic inspection system of physicomechanical properties of ferromagnetic articles, in Tez. dokl. XVII Rossiiskoi nauchno-tekhnicheskoi konferentsii s mezhdunarodnym uchastiem “Nerazrushayushchii kontrol’ i diagnostika” (Abstracts of Papers of the XVII Russian Scientific-and-Technological Conf. with International Participants on Nondestructive Testing and Diagnostics), Yekaterinburg, 2005.
Kostin, V.N., Osintsev, A.A., Stashkov, A.N., Nichipuruk, A.P., Kostin, K.V., and Sazhina, G.Yu., Portable instruments for multiparameter magnetic evaluation of material structures, Russ. J. Nondestr. Test., 2008, vol. 44, pp. 280–289.
Bida, G.V., The effect of a gap between the poles of an attachable electromagnet and a tested component on coercimeter readings and methods for decreasing it (Review), Russ. J. Nondestr. Test., 2010, vol. 46, pp. 836–853.
Mel’gui, M.A., Magnitnyi kontrol’ mekhanicheskikh svoistv stalei (Magnetic Inspection of Mechanical Properties of Steels), Minsk: Nauka i Tekhnika, 1980.
Mel’gui, M.A., The IMA-2A pulsed magnetic analyzer, in Nerazrushayushchie metody i sredstva kontrolya i ikh primenenie v promyshlennosti (Nondestructive Methods and Testing Tools and Their Application in Industry), Minsk: Nauka i Tekhnika, 1973, pp. 81–90.
Mel’gui, M.A., Mal’tsev, V.L., Piunov, V.D., and Tsysetskii, I.A., The IMA-4 pulsed magnetic analyzer, Defektoskopiya, 1979, no. 3, pp. 29–32.
Matyuk, V.F., Mel’gui, M.A., Osipov, A.A., Piunov, V.D., and Kulagin, V.N., IMA-4M pulsed magnetic analyzer, Russ. J. Nondestr. Test., 2003, vol. 39, pp. 210–215.
Mel’gui, M.A. and Matyuk, V.F., The IMA-5 pulsed magnetic analyzer, Defektoskopiya, 1979, no. 11, pp. 90–95.
Mel’gui, M.A., Matyuk, V.F., Olekh, Ya.A., and Tsukerman, V.L., The IMA-5B pulsed magnetic analyzer, in Nauchno-tekhnicheskie dostizheniya. Mezhotr. nauch.-tekhn. sb. (Scientific-and-Technological Advances. Interindustry Scientific-and-Technological Collected Articles), Moscow: VIMI, 1990, no. 4, pp. 41–44.
Matyuk, V.F., Burak, V.A., Delendik, M.N., Osipov, A.A., and Pinchukov, D.A., The IMA-6 pulsed magnetic analyzer, Russ. J. Nondestr. Test., 2009, vol. 45, pp. 491–501.
Mel’gui, M.A. and Matyuk, V.F., The IMPOK-1 pulsed flux controller, Defektoskopiya, 1982, no. 9, pp. 62–66.
Mel’gui, M.A., Matyuk, V.F., and Tsukerman, V.L., The IMPOK-2 unit for the on-line control of mechanical properties of steel flat and long products, in Nauchno-tekhnicheskie dostizheniya. Mezhotr. nauch.-tekhn. sb (Scientific-and-Technological Advances. Interindustry Scientific-and-Technological Collected Articles), Moscow: VIMI, 1993, no. 2, pp. 9–12.
Mel’gui, M.A. and Piunov, V.D., The error introduced by the change of the gap upon pulsed local magnetic inspection, Defektoskopiya, 1984, no. 2, pp. 41–45.
Matyuk V.F., Mel’gui, M.A., and Pinchukov, D.A., RB Patent 9748, Ofits. Byull., 2007, no. 5.
Matyuk V.F., Mel’gui, M.A., and Pinchukov, D.A., RB Patent 10698, Ofits. Byull., 2008, no. 3, pp. 151–152.
Matyuk V.F., Mel’gui, M.A., and Pinchukov, D.A., RF Patent 2330275, Byull. Izobr., 2008, no. 21.
Matyuk, V.F., Mel’gui, M.A., and Pinchukov, D.A., An instrument for nondestructive testing of the hardness of the engineering industry articles after their hardening and tempering, in Sb. nauchn. tr. VI Mezhdunar. nauch.-tekhn. konf. Materialy, tekhnologii i oborudovanie v proizvodstve, ekspluatatsii, remonte i modernizatsii mashin (Proc. VI Int. Sci.-Eng. Conf. Materials, Technologies, and Equipment in the Production, Operation, Repair, and Modernization of Machines), 2007, vol. 3, pp. 133–136.
Matyuk, V.F., Mel’gui, M.A., Pinchukov, D.A., and Osipov, A.A., The IMA-M multiparameter pulsed magnetic analyzer, in Mat-ly II Mezhdunar. nauch.-tekhn. konf. Priborostroenie 2009 (Proc. II Int. Sci.-Eng. Conf. Priborostroenie 2009), Minsk, 2009, pp. 83–85.
Matyuk, V.F. and Mel’gui, M.A., Design of new instrument for the magnetic structuroscopy based on the features of residual magnetization hysteresis upon the pulsed magnetization reversal of the article, Prib. Metody Izmer., 2011, no. 1, pp. 17–24.
Matyuk, V.F., Mel’gui, M.A., and Lyubarets, A.L., Multiparameter pulsed magnetic control of the heat-treatment quality of spring steels, in Mat-ly Mezhdunar. nauch.-tekhn. konf. Materialy, oborudovanie i resursosberegayushchie tekhnologii (Proc. Int. Sci.-Eng. Conf. Materials, Equipment and Resource-Saving Technologies), Mogilev, 2004, part 2, pp. 273–274.
Matyuk, V.F., Mel’gui, M.A., Pinchukov, D.A., and Lyubarets, A.L., Inspection of the strength characteristics and heat-treatment quality of ferromagnetic articles based on parameters of the residual-magnetization hysteresis loop upon their local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude: I. Parameters of the hysteresis loop, Russ. J. Nondestr. Test., 2005, vol. 41, pp. 269–276.
Matyuk, V.F., Mel’gui, M.A., and Pinchukov, D.A., Heat-treatment quality control of the articles from spring steels, in XVII Rossiiskaya nauchno-tekhnicheskaya konf. s mezhdunarodnym uchastiem “Nerazrushayushchii kontrol’ i diagnostika”. Tezisy dokl. (Abstracts of Papers of the XVII Russian Scientific-and-Technological Conf. with International Participants on Nondestructive Testing and Diagnostics), Yekaterinburg, 2005.
Matyuk, V.F., Mel’gui, M.A., Pinchukov, D.A., and Lyubarets, A.L., Inspection of the strength characteristics and heat-treatment quality of ferromagnetic articles according to parameters of the residual-magnetization hysteresis loop during their local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude: III. Steel 50KhGFA, Russ. J. Nondestr. Test., 2005, vol. 41, pp. 523–531.
Matyuk, V.F., Mel’gui, M.A., Pinchukov, D.A., and Abroskina, S.A., New possibilities of the pulse magnetic method of hardness testing of articles from ferromagnetic steels, Vestsi Nats. Akad. Navuk Belarusi, Ser. Fiz.-Tekh. Navuk, 2006, no. 2, pp. 114–120.
Matyuk, V.F., Mel’gui, M.A., Pinchukov, D.A., and Abroskina, S.A., Quality testing of high-temperature tempering of articles from medium-carbon refined steel 45 by multiparameter pulse magnetic method, Vestsi Nats. Akad. Navuk Belarusi, Ser. Fiz.-Tekh. Navuk, 2006, no. 3, pp. 113–118.
Mel’gui, M.A. and Matyuk, V.F., HFC hardening quality control via the multiparameter pulsed magnetic inspection, in Mater. III Mezhdunar. nauch.-tekhn. konferentsii Sovremennye metody i pribory kontrolya kachestva i diagnostiki sostoyaniya ob”ektov (Proc. III Int. Sci.-Eng. Conf. Modern Methods and Instruments of the Quality Control and Diagnostics of Objects), Mogilev, 2009, pp. 138–140.
Mel’gui, M.A., Quality control of the surface-hardened layers of articles by the pulsed magnetic method, Mater. Mezhdunar. nauch.-tekhn. konf. Materialy, oborudovanie i resursosberegayushchie tekhnologii (Proc. Int. Sci.-Eng. Conf. Materials, Equipment and Resource-Saving Technologies), Mogilev, 2011, part 2, pp. 210–211.
Mel’gui, M.A., Use of the IMA-M multiparameter magnetic analyzer for the heat-treatment quality control of high-speed steels, in Mater. VI Mezhdunar. nauch.-tekhn. konf. Priborostroenie-2013 (Proc. VI Int. Sci.-Eng. Conf. Priborostroenie-2013), Minsk: BNTU, 2013, pp. 207–209.
Kupalova, I.K., Magnetic quality control of hardening and tempering of high-speed steels, Fiz. Met. Metalloved., 1964, vol. 18, pp. 39–46.
GOST (State Standard) 19265-73: Rods and Stripes from High-Speed Steel. Appendix 4, 1973.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.A. Mel’gui, 2015, published in Defektoskopiya, 2015, Vol. 51, No. 3, pp. 11–20.
Rights and permissions
About this article
Cite this article
Mel’gui, M.A. Multiparameter methods in magnetic structuroscopy and instruments for their realization (Review): II. The pulsed magnetic multiparameter method and IMA-M instrument for its performance. Russ J Nondestruct Test 51, 138–145 (2015). https://doi.org/10.1134/S1061830915030055
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830915030055