Abstract
The results of acoustic-emission (AE) testing of flaws in steel specimens during welding and subsequent loading until destruction in MTS-50 and MTS-250 electrohydraulic machines are presented. Flaws were simulated via faulty fusions or the introduction of titanium and duralumin inserts. During loading, some specimens were broken along the weld seam and the other specimens were broken in the near-seam zone. A comparative analysis of the distributions of the informative parameters of AE signals, which are recorded during different types of specimen fracture, is presented.
Similar content being viewed by others
References
Ser’eznov, A.N., Stepanova, L.N., Ivliev, V.V., et al., Akustiko-emissionnyi kontrol’ zheleznodorozhnykh konstruktsii (Acoustic-Emission Testing of Railway Structures), Novosibirsk: Nauka, 2011.
Apasov, A.M., Studying Acoustic-Emission Signals under Static Loading of Flat High-Strength-Steel Specimens, Izv. Tomsk. Politekh. Univer., 2010, vol. 316, no. 2, pp. 32–41.
Stepanova, L.N., Ramazanov, I.S., and Kanifadin, K.V., Detecting Hazardous Sources of Acoustic-Emission Signals using Estimates of the Energy of Clusters, Defektoskopiya, 2010, no. 9, pp. 64–73 [Rus. J. Nondestr. Test. (Engl. Transl.), 2010, vol. 46, no. 9, pp. 676–683].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.N. Stepanova, V.N. Chaplygin, S.I. Kabanov, K.V. Kanifadin, S.A. Katarushkin, E.Yu. Lebedev, 2012, published in Defektoskopiya, 2012, Vol. 48, No. 6, pp. 11–21.
Rights and permissions
About this article
Cite this article
Stepanova, L.N., Chaplygin, V.N., Kabanov, S.I. et al. Studying the correlation of the informative parameters of acoustic-emission signals with the destruction processes in specimens with welding flaws. Russ J Nondestruct Test 48, 330–339 (2012). https://doi.org/10.1134/S1061830912060083
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830912060083