Abstract
The results of studies of the effect of particle sizes of iron powder on magnetic and electric characteristics of iron sintered materials are discussed. The contributions from different stages of producing specimens to formation of pore sizes are considered, and the results of metallographic studies are discussed.
Similar content being viewed by others
References
Gorkunov, E. S., and Ul’yanov, A. I., Magnitnye metody i pribory kontrolya kachestva izdelii poroshkovoi metallurgii (Magnetic Methods and Instruments for Testing the Quality of Articles of Powder Metallurgy), Yekaterinburg: Izd. UrO RAN, 1996.
Akimenko, V.B., Bulanov, V.Ya., Gulyaev, I.A., et al., Sostav, struktura i svoistva zheleznykh i legirivannykh poroshkov (Composition, Structure, and Properties of Iron and Alloyed Powders), Yekaterinburg: UIF Nauka, 1996.
Yoseff, H., Etude des propertiétés magnétiques des metaux ferromagnétiques frittés et contribution à l’etude de leur propertyétés méchaniques et éléctriques, Mataux, 1970, vol. 45, no. 355, pp. 99–121.
Salak, A., Über die Besienhungen zwischen Zugfestigkeit, Dehnung sowie Härte und Porigkeit von Eisensinterkörpern, 5-the Inter. Pulvermetall., Tagung, Dresden, 1973, Bd. 7, S. 9/1–9/19.
Kersten, M., Zur Theorie der ferromagnetischen Hysterese und der Anfängspermeabilität, Phys. Ztschr., 1943, Bd. 44, S. 63–77.
Bozort, R., Ferromagnetizm (Ferromagnetism), Moscow: Inostrannaya literatura, 1956.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.S. Gorkunov, S.M. Zadvorkin, Yu.V. Subachev, V.N. Antsiferov, A.P. Vakutin, E.V. Mel’nikova, S.V. Smirnova, 2009, published in Defektoskopiya, 2009, Vol. 45, No. 12, pp. 60–69.
Rights and permissions
About this article
Cite this article
Gorkunov, E.S., Zadvorkin, S.M., Subachev, Y.V. et al. The effect of sizes of particles of furnace charge on magnetic characteristics of a sintered iron powder. Russ J Nondestruct Test 45, 867–873 (2009). https://doi.org/10.1134/S1061830909120055
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830909120055