Abstract
Numerical studies of the permissible operation modes of the auger of a pulsating explosive device for high-frequency supply of cylindrical blocks of explosive charges into the bottom hole, which ensures drilling of rocks of various hardness categories by a series of explosions, are presented.
REFERENCES
Ostrovskii, A.P., Novye protsessy bureniya glubokikh skvazhin (New Processes for Boring Deep Boreholes), Moscow: Gostekhnadzor, 1960.
Shukhman, V.L., Fragmentation of rock at boring of boreholes by explosion, Vzryvnoe Delo, 1963, no. 53, p. 63.
Shukhman, V.L., On the effect of medium encircling the pressure charge of explosive on the dimensions of the explosion crater, Vzryvnoe Delo, 1967, no. 63, p. 259.
Kutuzov, B.N., Sovremennoe sostoyanie i perspektivy primeneniya v promyshlennosti patronnoi i struinoi tekhnologii bureniya skvazhin i razrusheniya tverdykh sred. Analiticheskii obzor (State-of-the-Art and Prospects of Industrial Application of Cartridge and Jet Technologies of Borehole Boring and Fracture of Solid Media: Analytical Survey), Moscow: Kvazar-VV, 1995.
Solov’ev, V.O. and Kel’ner, M.S., Protection of steel reflectors against the destructive effect of detonation products used in solid-propellant pulsating explosive devices, J. Mach. Manuf. Reliab., 2015, vol. 44, no. 1, pp. 102–107. https://doi.org/10.3103/S1052618815010094
Solov’ev, V.O., Means of initiation for solid-fuel impulse blasting assembly, Boepripasy Spetskhimiya, 2007, no. 3, pp. 57–62.
Li, X., Liu, K., and Yang, J., Study of the rock crack propagation induced by blasting with a decoupled charge under high in situ stress, Adv. Civ. Eng., 2020, vol. 2020, no. 3, pp. 1–18. https://doi.org/10.1155/2020/9490807
Ge, J., Xu, Yi., Huang, W., Wang, H., Yang, R., and Zhang, Z., Experimental study on crack propagation of rock by blasting under bidirectional equal confining pressure load, Sustainability, 2021, vol. 13, no. 21, p. 12093. https://doi.org/10.3390/su132112093
Rao, J.S., Bhatnagar, R., and Verma, A.K., Experimental investigation of shock wave attenuation in rock media, Int. J. Rock Mech. Min. Sci., 2013, vol. 57, p. 62.
Ne, S., Yang, J., and Yu, Q., Laboratory study on the dynamic response of rock under blast loading with active confining pressure, Int. J. Rock Mech. Min. Sci., 2018, no. 5, p. 101.
Yuan, W., Su, X., Wang, W., Wen, L., and Chang, J., Numerical study of the contributions of shock wave and detonation gas to crack generation in deep rock without free surfaces, J. Pet. Sci. Eng., 2019, vol. 177, pp. 699–710. https://doi.org/10.1016/j.petrol.2019.02.004
Li, Yi., Cao, J., Chen, X., Huang, C., and Zhao, Q., Numerical investigation on crack formation and penetration mechanism between adjacent blastholes, Shock Vib., 2020, vol. 2020, pp. 1–10. https://doi.org/10.1155/2020/8816059
Solov’ev, V.O., Kel’ner, M.S., and Korovkin, Yu.V., Small-scale systems of electric initiation for controlled explosive boring of rocks under difficult conditions, Probl. Mashinostr. Avtom., 2013, no. 1, pp. 106–116.
Tyulyubayev, R., Mustafin, A., and Kuandykov, A., Strengthening the design of screw devices in horizontal machines, Sci. Technol. Kaz., 2023, no. 1, pp. 51–58. https://doi.org/10.48081/yyhw3167
Evstratov, V.A., Voronova, E.Yu., Apachanov, A.S., Grigoryev, V.I., Sukharnikova, V.A., and Breslavtseva, I.V., Efficiency improvement of the screw modules of mining machines, Gorn. Oborud. Elektromekh., 2021, no. 2, pp. 42–47. https://doi.org/10.26730/1816-4528-2021-2-42-47
Sokolov, M.V., Klinkov, A.S., Efremov, O.V., Belyaev, P.S., and Odnol’ko, V.G., Avtomatizirovannoe proektirovanie i raschet shnekovykh mashin (Automated Design and Analysis of Screw Extruders), Moscow: Mashinostroenie, 2004.
Prochnost’, ustoichivost’, kolebaniya. Spravochnik (Strength, Stability, Oscillations: Reference Book), Birger, I.A. and Panovko, Ya.G., Eds., Moscow: Mashinostroenie, 1968, vol. 3.
Krylov, A.N., Vibratsiya sudov (Vessels Vibrations), Moscow: ONTI, 1936.
Anan’ev, I.V. and Egorsheva, N.I., Tabulirovannye znacheniya kombinatsii krugovykh i giperbolicheskikh funktsii (Tabulated Values of the Combination of Circular and Hyperbolic Functions), Moscow: Mashinostroenie, 1974.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by V. Selikhanovich
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Solov’ev, V., Makarov, S. Development of a Reusable Solid-Propellant Pulsating Explosive Device for Drilling Rocks of Various Hardness Categories. J. Mach. Manuf. Reliab. 52 (Suppl 1), S45–S51 (2023). https://doi.org/10.1134/S1052618823090145
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823090145