Abstract
This paper is devoted to the important problem of increase in the wear resistance of a radial bearing that operates in the hydrodynamic mode due to applying an antifriction polymer composite coating with an axial groove, which has truly viscous properties, on a nonstandard bearing bush adapted to friction conditions. The dependence of the rheological properties of a lubricant under turbulent friction on the pressure and temperature is considered. As a result, the velocity and pressure fields in the axial groove and on the surface of the polymer antifriction composite coating have been determined, as have the load capacity and friction force, which make it possible to increase the load capacity, reduce the friction coefficient (increase the wear resistance), and also increase the duration of the hydrodynamic mode. The results of numerical analysis of theoretical models and experimental study of the suggested design are presented to verify and confirm the effectiveness of the models obtained.
REFERENCES
Buyanovskii, I.A., Tatur, I.R., Samusenko, V.D., and Solenov, V.S., Effect of antifriction solid additives on the temperature stability of bentonite greases, J. Frict. Wear, 2020, vol. 41, no. 6, pp. 492–496. https://doi.org/10.3103/S1068366620060057
Albagachiev, A.Yu., Buyanovskii, I.A., Samusenko, V.D., and Chursin, A.A., Temperature resistance of Russian vacuum lubricants, Russ. Eng. Res., 2019, vol. 39, no. 12, pp. 1011–1013. https://doi.org/10.3103/s1068798x19120037
Buyanovskii, I.A., Temperature stability of lube oils under friction and its prognosis on the basis of current conceptions of chemical kinetics, Mekhanizatsiya Stroit., 2015, no. 6, pp. 16–19.
Seryakov, Yu.D. and Glazunov, V.A., Thermal simulations of contacting solids with contact energy release, Probl. Prochnosti Plast., 2021, vol. 83, no. 3, pp. 311–323. https://doi.org/10.32326/1814-9146-2021-83-3-311-323
Albagachiev, A.Yu., Mikheev, A.N., Tananov, M.A., and Tokhmetova, A.B., Determination of the heating temperature of a lubricating layer with friction, J. Mach. Manuf. Reliab., 2022, vol. 51, no. 5, pp. 478–482. https://doi.org/10.3103/S1052618822050028
Albagachiev, A.Yu., Stavrovskii, M.E., Sidorov, M.I., Ragutkin, A.V., and Aleksandrov, I.A., Temperature dependences of the reaction rate in tribochemical kinetics, J. Mach. Manuf. Reliab., 2022, vol. 51, no. 6, pp. 525–531. https://doi.org/10.3103/S1052618822060024
Albagachiev, A.Yu., Mikheev, A.V., Khasyanova, D.U., and Tananov, M.A., Tribological studies of lubricants, J. Mach. Manuf. Reliab., 2018, vol. 47, no. 5, pp. 464–468. https://doi.org/10.3103/S1052618818050023
Levanov, I.G., Zadorozhnaya, E.A., Mukhortov, I.V., and Nikitin, D.N., Modeling of hydrodynamic plain bearings taking into account the individual anti-wear properties of lubricants, Vestn. Yuzhno-Ural. Gos. Univ. Ser.: Mashinostr., 2021, vol. 21, no. 1, pp. 14–28. https://doi.org/10.14529/engin210102
Levanov, I., Zadorozhnaya, E., and Nikitin, D., Modification of friction machine II5018 for studying hydrodynamic plain bearings, Sovrem. Mashinostr. Nauka Obraz., 2020, no. 9, pp. 207–223. https://doi.org/10.1872/MMF-2020-16
Rozhdestvenskii, Yu.V., Zadorozhnaya, E.A., and Mukhortov, I.V., Development of the methods for studying tribocouplings of machines and mechanisms taking into account rheology of lubricant materials, Transportnye i transportno-tekhnologicheskie sistemy. Materialy Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii (Transport and Transport-Technological Systems: Proc. Int. Sci.-Tech. Conf.), Tyumen: 2013, pp. 226–230.
Rozhdestvenskii, Yu.V., Mukhortov, I.V., and Gavrilov, K.V., Challenges of selecting the lubricant materials in development and operation of engines of transport machines, Modernizatsiya Nauchn. Issled. Transp. Komplekse, 2014, vol. 1, pp. 184–187.
Khasyanova, D.U. and Mukutadze, M.A., Improvement of wear resistance of a journal bearing lubricated with micropolar lubricants and a molten metallic coating, J. Mach. Manuf. Reliab., 2022, vol. 51, no. 4, pp. 322–328. https://doi.org/10.3103/S1052618822040094
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by M. Astov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Khasyanova, D.U., Mukutadze, M.A. Study of the Wear Resistance of a Radial Bearing with a Nonstandard Support Profile Taking into Account the Dependence of Viscosity on the Pressure and Temperature. J. Mach. Manuf. Reliab. 52 (Suppl 1), S17–S25 (2023). https://doi.org/10.1134/S1052618823090054
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823090054