Abstract
The principles of welding with pressure for making nuclear reactor components from refractory nickel alloys with limited weldability are presented. The main focus is placed on gasostatic diffusive welding with additional surface treatment (laser surface modification and profiling by machining). It is shown that the modification of welded surfaces allows making the breaking strength of the weld joint at room temperature closer to that of the base metal.
REFERENCES
Dollezhal’, N.A. and Emel’yanov, I.Ya., Kanal’nyi yadernyi energeticheskii reaktor (Channel Nuclear Energy Reactor), Moscow: Atomizdat, 1980.
NP-104-2018: Welding and weld deposition of equipment and pipelines of nuclear energy facilities. Federal norms and regulations in the area of nuclear power use, 2018.
Medovar, B.I., Svarka zharoprochnykh austenitnykh stalei i splavov (Welding of Heat-Resistant Austenitic Steels and Alloys), Moscow: Mashinostroenie, 1966.
Sorokin, L.I., Formation of hot cracks in the near-seam zone at welding of nickel-based superalloys (review), Svarochnoe Proizvod., 2005, no. 8, p. 38.
Makarov, E.L. and Yakushin, B.F., Teoriya svarivaemosti stalei i splavov (Theory of Weldability of Steels and Alloys), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014.
Dushin, Yu.A., Medvedev, N.A., and Gribov, N.N., Technological properties of KhN55MVTs alloy as applied to high-temperature heat transfer equipment, Vopr. Atomnoi Nauki Tekh. Ser. Atomno-Vodorodnaya Energetika Tekhnol., 1988, no. 1, p. 94.
Dushin, Yu.A., Gribov, N.N., Ignatov, V.A., et al., General characteristic of KhN55MVTs alloy for large-scale equipment of high-temperature helium reactors, Vopr. Atomnoi Nauki Tekh. Ser. Materialoved. Nov. Mater., 1992, no. 1, p. 32.
Elkin, V.N., Gordo, V.P., and Melyukov, V.V., Diffusion welding of heterogeneous metals under conditions of hot isostatic pressing, Vestn. Permsk. Nats. Issled. Politekh. Univ. Mashinostr., Materialoved., 2013, vol. 15, no. 4, pp. 68–73.
Abdullah, D., A review of friction stirs welding, Int. J. Trend Sci. Res. Dev., 2017, vol. 1, no. 4, p. 181. https://doi.org/10.31142/ijtsrd124
Eliseev, A.A., Kalashnikova, T.A., Filippov, A.V., and Kolubaev, E.A., Material transfer by friction stir processing, Multiscale Biomechanics and Tribology of Inorganic and Organic Systems, Ostermeyer, G.P., Popov, V.L., Shilko, E.V., and Vasiljeva, O.S., Eds., Springer Tracts in Mechanical Engineering, Cham: Springer, 2021, pp. 169–188. https://doi.org/10.1007/978-3-030-60124-9_8
Mohan, D.G. and Wu, Ch.S., A review on friction stir welding of steels, Chin. J. Mech. Eng., 2021, vol. 34, no. 1, p. 137. https://doi.org/10.1186/s10033-021-00655-3
Dragunov, Yu.G., Elkin, V.N., Kirillov, S.Yu., Kudinov, V.V., Makarov, S.V., Mogilevskij, P.E., and Romadova, E.L., Method of welded connection of pipes with bottom of reactor, RF Patent 2740128, 2020.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by S. Kuznetsov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Dragunov, Y.G., Evropin, S.V., Elkin, V.N. et al. Welding with Pressure for Making Nuclear Reactor Components. J. Mach. Manuf. Reliab. 52 (Suppl 1), S1–S5 (2023). https://doi.org/10.1134/S1052618823090042
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823090042