Abstract
The effect of thermal cycling on the appearance of alternating stresses in the walls of tubes of perlite low-alloyed and austenitic chromium–nickel steels is studied by X-ray diffraction to develop the criteria of their compatibility. Optimal operating temperatures are estimated for the basic metals and the weld seam realized on their basis. Coincidence between experimental estimates and optimal temperatures established under long-term operation is noted. This may be considered as confirmation of the possibility of applying the stated approaches in predicting the development of hot cracks in the zone of a weld seam and the selection of operating temperatures, at which fields of internal stresses of certain value and sign are formed.
Similar content being viewed by others
References
F. A. Khromchenko, Welded Joints of Pipe-Lines. Diagnostics and Lifetime (Teplotekhnik, Moscow, 2010), Vol. 1 [in Russian].
X-Ray Analysis for Physical Metal Science, Ed. by Yu. A. Bagaryatskii (Gosudarstvennoe Nauchno-Tekhnicheskoe Izdatel’stvo Literatury po Chernoi i Tsvetnoi Metallurgii, Moscow, 1961) [in Russian].
A. A. Rusakov, X-ray Analysis for Metals (Atomizdat, Moscow, 1977) [in Russian].
L. I. Mirkin, X-Ray Structural Analysis for Polycrystals. Handbook, Ed. by Ya. S. Umanskii (Fizmatlit, Moscow, 1961) [in Russian].
Manual on X-Ray Investigation of Minerals, Ed. by V. A. Frank-Kamenetskii (Nedra, Leningrad, 1975) [in Russian].
Steels and Alloys for High Temperatures. Handbook, Ed. by S. B. Maslenkov and E. A. Maslenkova (Metallurgiya, Moscow, 1991), Book 1 [in Russian].
K. A. Lanskaya, L. A. Domenskaya, and G. L. Khotomlyanski., Met. Sci. Heat Treat. 13, 551 (1971).
T. G. Berezin., Teploenergetika., No. 3, 53 (1986).
I. I. Mints and L. E. Voronkov., Met. Sci. Heat Treat. 40, 326 (1998).
P. A. Antikain, Metals and Strength Calculation of Boilers and Pipe-Lines (Energoservis, Moscow, 2001) [in Russian].
Structural Materials for Nuclear Reactors, Part 2: Structure, Properties, Application, Ed. by N. M. Beskorovainyi (Atomizdat, Moscow, 1977) [in Russian].
V. B. Smykov, Corrosion Problems Related to Operational Process of Steam Generators of Nuclear Power Plants (Central Research Institute for Management, Economics and Information of Ministry of the Nuclear Industry, Moscow, 1985) [in Russian].
A. A. Makeev, L. L. Lyubimova, A. S. Zavorin, and A. A. Tashlyko., Steel Transl. 39 (12), 1048 (2009).
A. A. Lyubimova, A. A. Makeev, A. S. Tashlykov, R. N. Zavorin, and R. N. Fisenk., Steel Transl. 44 (2), 117 (2014).
Theory of Creeping and of Metals Long-Term Strength, Ed. by I. A. Oding (Gosudarstvennoe Nauchno-Tekhnicheskoe Izdatel’stvo Literatury po Chernoi i Tsvetnoi Metallurgii, Moscow, 1959) [in Russian].
S. A. Averi., Perspekt. Mater., No. 1, 44 (1997).
A. S. Zavorin, L. L. Lyubimova, B. V. Lebedev, A. A.Makeev, and A. A. Tashlyko., Izv. Tomsk. Politekh. Univ. 306 (2), 78 (2003).
G. Gleiter and B. Chalmers, Large-Angle Grain Boundaries (Pergamon Press, Oxford, New-York, Toronto, Sydney, Brawnschweig, 1972).
E. A. Grin’ and A. V. Zelenski., Therm. Eng. 56 (2), 103 (2009).
A. S. Kurkin and I. N. Ponomarev., Zavod. Lab. 77 (2), 51 (2011).
N. M. Vlasov and I. I. Fedik, Heat Emitting Elements of Rocket Nuclear Engines (Central Research Institute for Management, Economics and Information of Ministry of the Nuclear Industry, Moscow, 2001) [in Russian].
T. Yokobori, An Interdisciplinary Approach to Fracture and Strength of Solids (Wolters-Noordhoff Sci. Publ., Groningen, 1966).
OST (Branch Standard) No. 108.031.08-85: Stationary Boilers and Pipelines for Steam and Hot Water. Norms of Strength Calculation. General Provisions on Wall Thickness Backgrounding (Mashinostroenie, Moscow, 1993). http://aquagroup.ru/normdocs/16594.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.L. Lyubimova, A.A. Makeev, A.S. Zavorin, A.A. Tashlykov, 2017, published in Poverkhnost’, 2017, No. 5, pp. 56–64.
Rights and permissions
About this article
Cite this article
Lyubimova, L.L., Makeev, A.A., Zavorin, A.S. et al. On the application of X-ray diffraction in studying heat-transfer surfaces of steam generators. J. Surf. Investig. 11, 530–537 (2017). https://doi.org/10.1134/S1027451017030090
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1027451017030090