Abstract
In this work, the main parameters of a holographic microscope are studied with the aim of optimizing them. The optimum positions for the monochromatic electron-beam source with respect to the subject of research and for the screen detecting the interference pattern (the distance is 100 nm and 10 cm, respectively) are determined. The limiting thickness of the thin film of the subject of study (30 Å) at which the interference pattern can be observed is estimated. The main parameters of the coordinate-sensitive detector providing signal gain up to 105 at the output are calculated.
Similar content being viewed by others
References
N. V. Egorov, A. G. Karpov, L. I. Antonova, A. G. Fedorov, V. V. Trofimov, and S. R. Antonov, J. Surf. Invest.: X-Ray, Synchrotron Neutron Tech. 5, 992 (2011).
N. V. Egorov, L. I. Antonova, and V. P. Denisov, Poverkhnost’, No. 8, 106 (2004).
A. M. Yakobson, Radiotekh. Elektron. 15, 2464 (1972).
K. Kikoshita and I. Suzuki, in Proceedings of the International Congress on Rapid Photography (1980), p. 183.
N. V. Egorov and E. P. Sheshin, Autoelectronic Emission. Principles and Devices (Intellekt, Dolgoprudnyi, 2011), p. 248 [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.V. Egorov, V.V. Trofimov, S.R. Antonov, A.G. Fedorov, L.I. Antonova, 2014, published in Poverkhnost’. Rentgenovskie, Sinkhrotronnye i Neitronnye Issledovaniya, 2014, No. 8, pp. 14–17.
Rights and permissions
About this article
Cite this article
Egorov, N.V., Trofimov, V.V., Antonov, S.R. et al. Studying the electrophysical parameters of a holographic microscope. J. Surf. Investig. 8, 745–747 (2014). https://doi.org/10.1134/S1027451014040259
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1027451014040259