Abstract
The method of “compensating additives” is used to determine the corrosion current of nickel and nickel powder in 0.5 M NaCl solution containing 0.01 M HCl. Comparing the corrosion currents measured on bulk nickel and nickel powder, the specific electrochemically active surface area of nickel powder is estimated.
Similar content being viewed by others
References
ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, Davis, J.R., Ed., ASM International, 2000, pp. 127–140.
Corrosion. Metal/Environment Reaction, Shreir, L.L., Jarman, R.A., and Burstein, G.T., Eds., Oxford: Butterworth-Heinemann, 1994, vol. 1, p. 4:148.
Fouda, A.S., Tawfik, H., Abdallah, N.M., and Ahmd, A.M., Int. J. Electrochem. Sci., 2013, vol. 8, p. 3390.
Rybalka, K.V., Beketaeva, L.A., Bukhan’ko, N.G., and Davydov, A.D., Russ. J. Electrochem., 2014, vol. 50, p. 1149.
Korrosion und Korrosionsschutz, Todt, F., Ed., Berlin Walter De Gruyter, 1961.
Domiciano, V.G., Garcia, J.R., and Pandolfelli, V.C., Amer. Ceramic Soc. Bull., 2007, vol. 86, p. 9401.
Makletsov, V.G. and Shchuklina, O.V., Vestn. Udmurt. Univ.: Ser. Khimiya., 2005, no. 8, p. 35.
Pletnev, M.A., Dorfman, A.M., Povstugar, I.V., Mikhailik, O.M., and Lyakhovich, A.M., Zashch. Met., 1999, vol. 35, p. 37.
Rybalka, K.V., Beketaeva, L.A., and Davydov, A.D., Russ. J. Electrochem., 2016, vol. 52, p. 268.
Rybalka, K.V., Russ. J. Electrochem., 2014, vol. 50, p. 500.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.V. Rybalka, L.A. Beketaeva, A.D. Davydov, 2016, published in Elektrokhimiya, 2016, Vol. 52, No. 10, pp. 1035–1038.
Rights and permissions
About this article
Cite this article
Rybalka, K.V., Beketaeva, L.A. & Davydov, A.D. Determination of corrosion current density on bulk nickel and nickel powder by the rate of cathodic depolarizer consumption. Russ J Electrochem 52, 921–924 (2016). https://doi.org/10.1134/S1023193516100116
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1023193516100116