Abstract
The results of the development of procedures for forming membrane-electrode assemblies (MEAs) of solid oxide fuel cells (SOFCs) by co-sintering of electrodes and electrochemical tests of MEAs were described. Plates of Hionic™ material (Fuel Cell Materials, United States) with an area of 50 × 50 mm2 were used as a solid electrolyte membrane. The cathode layers were prepared from cation-deficient lanthanum-strontium manganite and the anion conductor 89 mol % ZrO2–10 mol % Sc2O3–1 mol % CeO2 (10Sc1CeSZ) with a carbon black addition for control over the microstructure. The anode layers were formed from the composite NiO/10Sc1CeSZ and by introducing rice starch as a pore-forming agent in the anode current-collecting layer. The thermal treatment mode was optimized based on thermogravimetry and scanning electron microscopy data and the results of testing the electrochemical characteristics of SOFCs to provide the formation of electrochemically active electrodes using one thermal cycle.
Similar content being viewed by others
References
Ivers-Tiffee, E., Weber, A., and Herbstritt, D., J.Eur. Ceram. Soc., 2001, vol. 21, p. 1805.
Selimovic, A., Kemm, M., Torisson, T., and Assadi, M., J.Power Sources, 2005, vol. 145, p. 463.
Nakajo, A., Stiller, C., Harkegard, G., and Bolland, O., J.Power Sources, 2006, vol. 148, p. 287.
Anam, K. and Lin, C.K., Appl. Mech. Mater., 2014, vol. 493, p. 331.
Bouhala, L., Belouettar, S., Makradi, A., and Remond, Y., Mater. Des., 2010, vol. 31, p. 1033.
Muller, A.C., Herbstritt, D., and Ivers-Tiffee, E., Solid State Ionics, 2002, vol. 152, p. 537.
Mucke, R., Menzler, M.H., Buchkremer, H.P., and Stover, D., J.Am. Ceram. Soc., vol. 92, p. 95.
Burmistrov, I., Agarkov, D., Bredikhin, S., Nepochatov, Yu., Tiunova, O., and Zadorozhnaya, O., ECS Trans., 2013, vol. 57, p. 917.
Tiunova, O.V., Zadorozhnaya, O.Yu., Nepochatov, Yu.K., Burmistrov, I.N., Kuritsina, I.E., and Bredikhin, S.I., Russ. J. Electrochem., 2014, vol. 50, p. 719.
Kolotygin, V.A., Tsipis, E.V., Ivanov, A.I., Fedotov, Y.A., Burmistrov, I.N., Agarkov, D.A., Sinitsyn, V.V., Bredikhin, S.I., and Kharton, V.V., J.Solid State Electrochem., 2012, vol. 16, p. 2335.
Ivanov, A.I., Agarkov, D.A., Burmistrov, I.N., Kudrenko, E.A., Bredikhin, S.I., and Kharton, V.V., Russ. J. Electrochem., 2014, vol. 50, p. 730.
Agarkov, D.A., M.Sc. Dissertation, Chernogolovka: Inst. of Solid State Physics, Russ. Acad. Sci., 2013.
Bredikhin, I., Sinitsyn, V., Aronin, A., Kutitsina, I., and Bredikhin, S., ECS Trans., 2007, vol. 7, p. 1541.
Bredikhin, I., Bredikhin, S., and Kveder, V., ECS Trans., 2009, vol. 25, p. 1967.
Burmistrov, I.N., Agarkov, D.A., Tartakovskii, I.I., Kharton, V.V., and Bredikhin, S.I., ECS Trans., 2015, vol. 68, p. 1265.
Zaitseva, D.V., Agarkov, D.A., Burmistrov, I.N., and Bredikhin, S.I., Abstracts of Papers, Vserossiiskaya konferentsiya s mezhdunarodnym uchastiem “Toplivnye elementy i energoustanovki na ikh osnove,” (All-Russian Conf. with Foreign Participants “Fuel Cells and Energy Units on their Basis), Chernogolovka, 2015, p. 128.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.N. Burmistrov, D.A. Agarkov, F.M. Tsybrov, S.I. Bredikhin, 2016, published in Elektrokhimiya, 2016, Vol. 52, No. 7, pp. 749–758.
Published on the basis of the materials of III All-Russia Conference “Fuel Cells and Power Plants on Their Basis,” Chernogolovka, 2015.
Rights and permissions
About this article
Cite this article
Burmistrov, I.N., Agarkov, D.A., Tsybrov, F.M. et al. Preparation of membrane-electrode assemblies of solid oxide fuel cells by co-sintering of electrodes. Russ J Electrochem 52, 669–677 (2016). https://doi.org/10.1134/S1023193516070053
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1023193516070053