Abstract
A possibility for determining the metal corrosion current in the acidic solutions in the absence of external polarization is considered. The calculations are based on the analysis of time dependence of the amount of electrolyte with a lower pH value (as compared with the pH value of the working solution), which was introduced into the measuring cell in order to compensate an increase of the pH value in the course of corrosion.
References
Fontana, M.G., Corrosion Engineering, McGraw-Hill, 1986, p. 16.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.V. Rybalka, 2014, published in Elektrokhimiya, 2014, Vol. 50, No. 5, pp. 558–560.
Rights and permissions
About this article
Cite this article
Rybalka, K.V. Determination of metal corrosion rate using the pH-metry by the method of compensating additives. Russ J Electrochem 50, 500–502 (2014). https://doi.org/10.1134/S1023193514050085
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1023193514050085