Abstract
In this paper, ZnO was applied to modify the surface of LiNi1/3Co1/3Mn1/3O2 cathode material by a simple method. Powder X-ray diffraction (XRD) results show that both of the pristine material and the modified material were well crystallized and closely similar to each other. The crystal parameters of pristine material increased by modified measure. Scan electron microscope (SEM) pictures exhibit that the quasispherical pristine material was modified to the squareness one. Transmission electron microscope (TEM) image clearly elucidates that ZnO (several nanometers to 20 nm) was successful coated on surface of LiNi1/3Co1/3Mn1/3O2. X-ray photo-electron spectrometry (XPS) is used to characterize the composite of the coating layer on the surface of modified material. Electrochemical performance results present that the ZnO coating layer decrease the initial capacities of LiNi1/3Co1/3Mn1/3O2 by increasing the surface layer resistances. However, the cycling performance of LiNi1/3Co1/3Mn1/3O2 was effectively improved by the ZnO coating layer.
Similar content being viewed by others
References
Ohzuku, T. and Makimura, Y., Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries, Chem Lett. 2001, vol. 68, pp. 642, 643.
Dahbia, M., Wikbergb, J.M., Saadoune, I., et al., A Delithiated LiNi0.65Co0.25Mn0.10O2 Electrode Material: A Structural, Magnetic and Electrochemical Study, Electrochim. Acta, 2009, vol. 54, pp. 3211–3217.
Li, X., Wei, Y.J., Ehrenberg, H., et al., Characterizations on the Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Prepared by a Wet-Chemical Process, Solid State Ionics, 2008, vol. 178, pp. 1969–1974.
Luo, X.F., Wang, X.Y., Liao, L., et al., Synthesis and Characterization of High Tap-Density Layered LiNi1/3Co1/3Mn1/3O2 Cathode Material via Hydroxide Co-Precipitation, J. Power Sources, 2006, vol. 158, pp. 654–658.
He, P., Wang, H., Qia, L., et al., Electrochemical Characteristics of Layered LiNi1/3Co1/3Mn1/3O2 and with Different Synthesis Conditions, J. Power Sources, 2006, vol. 160, pp. 627–632.
Myung, S.T., Lee, M.H., Komaba, S., et al., Hydrothermal Synthesis of Layered LiNi1/3Co1/3Mn1/3O2 as Positive Electrode Material for Lithium Secondary Battery, Electrochim. Acta, 2005, vol. 50, pp. 4800–4806.
Lu, C.H., Wu, T.Y., Wu, H.C., et al., Electrochemical Properties of LiM 1/6Mn11/6O4 (M = Mn, Co, Al and Ni) as Cathode Materials for Li-Ion Batteries Prepared by Ultrasonic Spray Pyrolysis Method, J. Power Sources, 2002, vol. 109, pp. 333–339.
Huang, Y.J., Gao, D.S., Lei, G.T., et al., Synthesis and Characterization of Li(Ni1/3Co1/3Mn1/3)0.96Si0.04O1.96F0.04 as a Cathode Material for Lithium-Ion Battery, Mater. Chem. Phys., 2007, vol. 106, pp. 354–359.
Li, D.C., Kato, Y., Kobayakawa, K., et al., Preparation and Electrochemical Characteristics of LiNi1/3Mn1/3Co1/3O2 Coated with Metal Oxides Coating, J. Power Sources, 2006, vol. 160, pp. 1342–1348.
Park, B.C., Kim, H.B., Myung, S.T., et al., Improvement of Structural and Electrochemical Properties of AlF3-Coated Li[Ni1/3Co1/3Mn1/3O2 Cathode Materials on High Voltage Region, J. Power Sources, 2008, vol. 178, pp. 826–831.
Kim, H.S., Kim, Y., Kim, S.I., et al., Enhanced Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Cathode Material by Coating with LiAlO2 Nanoparticles, J. Power Sources, 2006, vol. 161, pp. 623–627.
Sun, Y.K., Lee, Y.S., Yoshio, M., et al., Synthesis and Electrochemical Properties of ZnO-Coated LiNi0.5Mn1.5O4 Spinel as 5 V Cathode Material for Lithium Secondary Batteries, Electrochem. Solid-State Let., 2002, vol. 5, no. 5, pp. A99–A102.
Liu, H.W., Cheng, C.X., Hu, Z.Q., et al., The Effect of ZnO Coating on LiMn2O4 Cycle Life in High Temperature for Lithium Secondary Batteries, Mater. Chem. Phys., 2007, vol. 101, pp. 276–279.
Chen, Y.H., Chen, R.Z., Tang, Z.Y., et al., Synthesis and Characterization of Zn-doped LiCo0.3Ni0.4−x Mn0.3ZnxO2 Cathode Materials for Lithium-Ion Batteries, J. Alloys and Compounds, 2009, vol. 476, pp. 539–542.
Fan, G.X., Zeng, Y.W., Chen, R.S., et al., Microstructure and Electrochemical Characterization of Spherical-Like Orthorhombic LiMnO2 via Co-Precipitation, J. Alloys and Compounds, 2008, vol. 461, pp. 267–272.
Lee, S.H., Koo, B.K., Kim, J.C., et al., Effect of Co3(PO4)2 Coating on Li[Co0.1Ni0.15Li0.2Mn0.55]O2 Cathode Material for Lithium Rechargeable Batteries, J. Power Sources, 2008, vol. 184, pp. 276–283.
Zheng, J.M., Li, J., Zhang, Z.R., et al., Solid State Ionics, 2008, vol. 179, pp. 1794–1799.
Guo, R., Shi, P., Cheng, X., et al., Synthesis and Characterization of Carbon-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Material Prepared by Polyvinyl Alcohol Pyrolysis Route, J. Alloys and Compounds, 2008, vol. 473, pp. 53–58.
Hwang, B.J., Hu, S.K., Chen, C.H., et al., Hwo Shuenn Sheu, In-situ XRD Investigations on Structure Changes of ZrO2-Coated LiMn0.5Ni0.5O2 Cathode Materials during Charge, J. Power Sources, 2007, vol. 174, pp. 761–765.
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Russian in Elektrokhimiya, 2011, Vol. 47, No. 2, pp. 168–172.
The article is published in the original.
Rights and permissions
About this article
Cite this article
Tan, L., Liu, H. Influence of ZnO coating on the structure, morphology and electrochemical performances for LiNi1/3Co1/3Mn1/3O2 material. Russ J Electrochem 47, 156–160 (2011). https://doi.org/10.1134/S1023193511020170
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1023193511020170