Effect of the functionalizing of carbon nanotubes on the electrodeposited catalysts’ structure and catalytic properties

Abstract

The structure and hydrophilic-hydrophobic properties of functionalized single-wall carbon nanotubes are studied by the standard porosimetry method. It is shown that the functionalized nanotubes have highly hydrophilic surface; at that the summary surface area measured “by octane” decreased, as a result of the functionalizing, due to the blocking of the nanotubes’ inner channels by the functional groups located at the nanotubes’ ends. The nanotubes’ capacitive properties are studied; their charging-discharging curves appeared being highly reversible, unlike those of other carbonaceous materials. Catalytic properties of the functionalized nanotubes are studied, with particular tendency toward their using as a carrier of platinum catalysts for the methanol oxidation and oxygen electroreduction reactions. When minor amounts (5–10 µg cm⁻²) of platinum or platinum-ruthenium alloy are deposited onto the nanotubes’ hydrophilic surface, uniform layer of the catalyst is formed, with specific surface area up to 150–300 m² g⁻¹; high current of the methanol oxidation or oxygen electroreduction is observed at these catalysts. When the catalyst deposit mass increased, its specific surface area decreased, as well as the specific current of the reactions occurring thereon. When the current is related to the electrochemically active unit surface, the catalytic activity is nearly the same both for different catalyst mass deposited onto the nanotubes and the same catalyst mass at different carbonaceous carriers.