Abstract
The features of melt flow of LDPE and boron oxide oligomer blends during extrusion mixing are investigated. It is established that the extruder-wall pressure and the torque of the screw decrease monotonically with an increase in the boron oxide oligomer content up to 25 vol %. Exceeding this concentration threshold leads to a several-fold stepwise fall in of the mentioned characteristics. This result is explained within the concepts about spontaneous restructuring of the blend accompanied by an increase of the specific surface of phases and by slipping at the interface of the blend components that is caused by the planar structure of the boron oxide oligomer molecules.
Similar content being viewed by others
References
A. B. Shaulova, A. Yu. Shaulov, and B. Z. Shalumov, in Proceedings of 16 International Congress on Glass, Madrid, 1992, p. 273.
K. Urman and J. U. Otaigbe, Prog. Polym. Sci. 32, 1462 (2007).
A. Yu. Shaulov and A. A. Berlin, Vse Mater. Entsikl. Sprav., No. 9, 22 (2011).
A. Yu. Shaulov and A. A. Berlin, Recent Res. Dev. Polym. Sci. 11, 21 (2012).
J. U. Otaigbe, C. J. Quinn, and G. H. Beall, Polym. Compos. 19, 18 (1998).
J. Otaigbe, K. Urman, and T. Schweizer, J. Rheol. (N. Y.) 51, 1171 (2007).
W. H. Zachariasen, Acta Crystallogr. 16, 385 (1963).
M. S. Maksimenko, V. S. Krylov, and M. A. Lipinskii, Zh. Prikl. Khim. 19, 154 (1946).
G. M. Bartenev and A. S. Eremeeva, Vysokomol. Soedin. 2, 1845 (1960).
B. P. Tarasevich, N. Z. Sirotkina, A. S. Il’in, and E. V. Kuznetsov, Vysokomol. Soedin., Ser. A 27, 451 (1985).
F. J. Norton, J. Am. Ceram. Soc. 36(3), 90 (1953).
B. V. Tarasov, The Problems of Glass Physics (Stroiizdat, Moscow, 1976) [in Russian].
A. V. Gladkov, Tr. MKhTI im. D.I. Mendeleeva, No. 24 (1957).
P. W. Bridgman, J. Appl. Phys. 24, 405 (1953).
D. S. Sanditov and G. M. Bartenev, Physical Properties of Disordered Structures (Nauka, Novosibirsk, 1982) [in Russian].
O. V. Mazurin, M. V. Strel’tsina, and T. P. Shvaiko-Shvaikovskaya, The Properties of Glasses and Glass-Forming Melts (Nauka, Moscow, 1980), Vol. 4, Part 1 [in Russian].
R. L. Mozzi and B. E. Warren, J. Appl. Crystallogr. 3, 251 (1969).
S. L. Strong and R. Kaplow, Acta Crystallogr., Sect. B 24, 1032 (1968).
G. M. Bartenev, Structure and Mechanical Properties of Inorganic Glasses (Stroiizdat, Moscow, 1966) [in Russian].
V. V. Brazhkin, Y. Katayama, Y. Inamura, M. V. Kondrin, A. G. Lyapin, S. V. Popova, and R. N. Voloshin, Pis’ma Zh. Eksp. Teor. Fiz. 78, 845 (2003).
J. D. Mackenzie, J. Chem. Phys. 24, 925 (1956).
J. Krohg-Moe, J. Non-Cryst. Solids 1, 269 (1969).
A. Erdemir, Lubr. Eng. 47(3), 16 (1991).
X. D. Ma, W. H. Unertl, and A. Erdemir, J. Mater. Res. 4(8), 235 (1999).
Polymer Blends, Ed. by D. R. Paul and K. Bucknall (Wiley, New York, 2002; NOT, St. Petersburg, 2009), Vol. 1.
B. D. Favis and J. P. Chalifoux, Polymer 29, 176 (1988).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.V. Stegno, K.V. Zuev, A.V. Grachev, V.M. Lalayan, S.A. Patlazhan, A.Yu. Shaulov, A.A. Berlin, 2014, published in Vysokomolekulyarnye Soedineniya. Ser. A, 2014, Vol. 56, No. 2, pp. 170–173.
Rights and permissions
About this article
Cite this article
Stegno, E.V., Zuev, K.V., Grachev, A.V. et al. Features of the melt flow of polyethylene and boron oxide oligomer blends. Polym. Sci. Ser. A 56, 169–172 (2014). https://doi.org/10.1134/S0965545X14020114
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965545X14020114