Abstract
A micromechanically-based elastic-viscoplastic model for the thermoforming process of semicrystalline polymer materials is proposed and implemented in a finite element code. This model takes into account the temperature and strain rate dependence. In this process the applied temperature is taken uniform throughout the sheet and its variation is due only to the adiabatic heating. The simulations are conducted for isotactic polypropylene using the finite element method. The polymer sheet thickness, the orientation of the polymer molecular chains, and the percent crystallinity show an important dependence on the process temperature (polymer softening) and the geometry of the mold. Based on recent experimental results in the literature, amorphization (decrease of crystallinity) is taken into account.
Similar content being viewed by others
References
A. S. Argon, Philos. Mag. 28, 839 (1973).
Aus der Wiesche, J. Appl. Therm. Eng. 24, 2391 (2004).
M. K. Warby, J. R. Whiteman, W. G. Jiang, et al., Math. Comput. Simul. 61, 209 (2003).
F. M. Schmidt, Y. Le Maoult, and S. Monteix, J. Mater. Process. Technol. 143–144, 225 (2003).
A. Makradi, S. Belouettar, S. Ahzi, and S. Puissant, submitted for publication in J. Appl. Polym. Sci. (2006).
M. F. S. Lima, M. A. Z. Vasconcellos, and D. Samios, J. Polym. Sci., Part B: Polym. Phys. 40, 896 (2002).
G. Machado, E. L. G. Denardin, E. J. Kinast, et al., Eur. Polym. J. 41, 129 (2005).
D. Samios, S. Tokumoto, and E. L. G. Denardin, Int. J. Plast. 22, 1924 (2006).
Abaqus/explicit manuals version 6.5. Abaqus Inc., Rising Mills, 166 Valley Street, Providence, RI 02909 USA.
M. C. Boyce, S. Socrate, and P. G. Llana, Polymer 41, 2183 (2002).
A. Makradi, S. Ahzi, R. V. Gregory, and D. D. Edie, Int. J. Plast. 21, 741 (2005).
S. Ahzi, A. Makradi, R. V. Gregory, and D. D. Edie, Mech. Mater. 33, 1139 (2003).
E. M. Arruda and M. C. Boyce, J. Mech. Phys. Solids 41, 931 (1993).
A. Cohen, Rheol. Acta 30, 270 (1991).
J. Richeton, S. Ahzi, L. Daridon, and Y. Rémond, Polymer 46, 6035 (2005).
Z. Wu, M. C. Boyce, S. Ahzi, and A. Makradi, J. Mater. Sci. 40, 4605 (2005).
J. Richeton, S. Ahzi, K. S. Vecchio, F. C. Jiang and A. Makradi, Int. J. Solids Struct. 44, 7938 (2007).
A. D. Mulliken and M. C. Boyce, Int. J. Solids Struct. 43, 1331 (2006).
J. Richeton, S. Ahzi, A. Makradi, and K. S. Vecchio, J. Phys. 4, 134 (2006).
E. M. Arruda, M. C. Boyce, and R. Jayachandran, Mech. Mater. 19, 193 (1995).
M. C. Boyce, E. L. Montagut, and A. S. Argon, Polym. Eng. Sci. 32, 1073 (1992).
A. K. Doufas, A. J. McHugh, and C. Miller, J. Non-Newtonian Fluid Mech. 92, 27 (2000).
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Russian in Vysokomolekulyarnye Soedineniya, Ser. A, 2008, Vol. 50, No. 5, pp. 841–849.
This article was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Makradi, A., Ahzi, S., Belouettar, S. et al. Thermoforming process of semicrystalline polymeric sheets: Modeling and finite element simulations. Polym. Sci. Ser. A 50, 550–557 (2008). https://doi.org/10.1134/S0965545X0805009X
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965545X0805009X