Abstract
New molybdenum-containing catalysts based on PAF-30 mesoporous carbon material for oxidation of sulfur-containing compounds (SCs) in a model fuel were synthesized. The PAF-30 support was modified with functional groups containing a positively charged nitrogen atom with various substituents. The modified supports were studied by the methods of low-temperature nitrogen adsorption/desorption, IR spectroscopy, and elemental analysis. The major factors affecting the oxidation were considered: reaction temperature and time, oxidant amount, catalyst dosage, and kind of sulfur-containing substrate. For the Мо/PAF-30-NEt3 catalyst, optimum conditions were found for oxidation of various classes of SCs in model mixtures: H2O2 : S molar ratio 6 : 1, 60°С, 60 min. The Мо/PAF-30-NEt3 catalyst operates in dibenzothiophene (DBT) oxidation during five cycles without appreciable activity loss.
Similar content being viewed by others
REFERENCES
Filippis, P.D. and Scarsella, M., Energy Fuels, 2003, vol. 17, no. 6, pp. 1452–1455. https://doi.org/10.1021/ef0202539
Rudyakova, E.V., Sistema otsenki kachestva topliva, masel i spetsial’nykh zhidkostei (A System for Evaluating the Quality of Fuel, Oils, and Specialty Liquids), Irkutsk: Irkutskii Gos. Tekh. Univ., 2013.
Kilanowski, D.R., Teeuwen, H., Beer, V.H.J., Gates, B.C., Schuit, G.C.A., and Kwart, H., J. Catal., 1978, vol. 55, no. 2, pp. 129–137. https://doi.org/10.1016/0021-9517(78)90199-9
Ghubayra, R., Nuttall, C., Hodgkiss, S., Craven, M., Kozhevnikova, E.F., and Kozhevnikov, I.V., Appl. Catal. B: Environmental, 2019, vol. 253, pp. 309–316. https://doi.org/10.1016/j.apcatb.2019.04.063
Lin, L., Hong, L., Jianhua, Q., and Jinjuan, X., China Petrol. Process. Petrochem. Technol., 2010, vol. 12, no. 4, pp. 1–6.
Babich, I.V. and Moulijn, J.A., Fuel, 2003, vol. 82, no. 6, pp. 607–631. https://doi.org/10.1016/S0016-2361(02)00324-1
Gridneva, E.S., Cand. Sci. (Eng.) Dissertation, Moscow: Moscow State Univ. of Engineering Ecology, 2010.
Chica, A., Corma, A., and Domine, M.E., J. Catal., 2006, vol. 242, no. 2, pp. 299–308. https://doi.org/10.1016/j.jcat.2006.06.013
Otsuki, S., Nonaka, T., Takashima, N., Qian, W., Ishihara, A., Imai, T., and Kabe, T., Energy Fuels, 2000, vol. 14, no. 6, pp. 1232–1239. https://doi.org/10.1021/ef000096i
Mokhtar, W.W., Kader, A.A., and Bakar, A.W., Fuel Process. Technol., 2012, vol. 101, pp. 78–84. https://doi.org/10.1016/j.fuproc.2012.04.004
Bösmann, A., Datsevich, L., Jess, A., Lauter, A., Schmitz, C., and Wasserscheid, P., Chem. Commun., 2001, no. 23, pp. 2494–2495. https://doi.org/10.1039/B108411A
Sano, Y., Sugahara, K., Choi, K., Korai, Y., and Mochida, I., Fuel, 2005, vol. 84, nos. 7–8, pp. 903–910. https://doi.org/10.1016/j.fuel.2004.11.019
Park, J.G., Chang, H.K., Yi, K.B., Park, J., Han, S., Cho, S., and Kim, J., Appl. Catal. B: Environmental, 2008, vol. 81, nos. 3–4, pp. 244–250. https://doi.org/10.1016/j.apcatb.2007.12.014
Li, F., Zhang, Z., Feng, J., Cai, X., and Xu, P., J. Biotechnol., 2007, vol. 127, no. 2, pp. 222–228. https://doi.org/10.1016/j.jbiotec.2006.07.002
Kareem, S.A., Aribike, D.S., Nwachukwu, S.C.U., and Latinwo, G.K., J. Environ. Sci. Eng., 2012, vol. 54, no. 1, pp. 98–103.
Komintarachat, C. and Trakarnpruk, W., Ind. Eng. Chem. Res., 2006, vol. 45, no. 6, pp. 1853–1856. https://doi.org/10.1021/ie051199x
Zhao, P.P., Zhang, M.J., Wu, Y.J., and Wang, J., Ind. Eng. Chem. Res., 2012, vol. 51, no. 19, pp. 6641–6647. https://doi.org/10.1021/ie202232j
Ghorbani, N. and Moradi, G., Chin. J. Chem. Eng., 2019, vol. 27, no. 11, pp. 2759–2770. https://doi.org/10.1016/j.cjche.2019.01.037
Rakhmanov, E.V., Tarakanova, A.V., Valieva, T., Akopyan, A.V., Litvinova, V.V., Maksimov, A.L., Anisimov, A.V., Vakarin, S.V., Semerikova, O.L., and Zaikov, Yu.P., Petrol. Chem., 2014, vol. 54, no. 1, pp. 48–50. https://doi.org/10.1134/S0965544114010101
Akopyan, A.V., Domashkin, A.A., Polikarpova, P.D., Tarakanova, A.V., Anisimov, A.V., and Karakhanov, E.A., Theor. Found. Chem. Eng., 2018, vol. 52, pp. 894–897. https://doi.org/10.1134/S0040579518050020
García-Gutierrez, J.L., Fuentes, G.A., HernandezTeran, M.E., Garcia, P., Murrieta-Guevara, F., and Jimenez-Cruz, F., Appl. Catal. A: General, 2008, vol. 334, nos. 1–2, pp. 366–373. https://doi.org/10.1016/j.apcata.2007.10.024
Sundararaman, R. and Song, C., Ind. Eng. Chem. Res., 2014, vol. 53, no. 5, pp. 1890–1899. https://doi.org/10.1021/ie403445f
Sikarwar, P., Kumar, U.K.A., Gosu, V., and Subbaramaiah, V., J. Environ. Chem. Eng., 2018, vol. 6, no. 2, pp. 1736–1744. https://doi.org/10.1016/j.jece.2018.02.021
Akopyan, A.V., Polikarpova, P.D., Arzyaeva, N.V., Anisimov, A.V., Maslova, O.V., Senko, O.V., and Efremenko, E.N., ACS Omega, 2021, vol. 6, no. 41, pp. 26932–26941. https://doi.org/10.1021/acsomega.1c03267
Dadashi, M., Mazloom, G., Akbari, A., and Banisharif, F., Environ. Sci. Pollut. Res., 2020, vol. 27, no. 24, pp. 30600–30614. https://doi.org/10.1007/s11356-020-09266-2
Taghizadeh, M., Mehrvarz, E., and Taghipour, A., Rev. Chem. Eng., 2020, vol. 36, no. 7, pp. 831–858. https://doi.org/10.1515/revce-2018-0058
Ben, T., Ren, H., Ma, S., Cao, D., Lan, J., Jing, X., Wang, W., Xu, J., Deng, F., Simmons, J.M., Qiu, S., and Zhu, G., Angew. Chem. Int. Ed., 2009, vol. 48, no. 50, pp. 9457–9460. https://doi.org/10.1002/anie.200904637
Merino, E., Verde-Sesto, E., Maya, E.M., Corma, A., Iglesias, M., and Sanchez, F., Appl. Catal. A: General, 2014, vol. 469, pp. 206–212. https://doi.org/10.1016/j.apcata.2013.09.052
Maximov, A., Zolotukhina, A., Kulikov, L., Kardasheva, Y., and Karakhanov, E., React. Kinet. Mech. Catal., 2016, vol. 117, pp. 729–743. https://doi.org/10.1007/s11144-015-0956-7
Plietzsch, O., Schilling, C.I., Tolev, M., Nieger, M., Richert, C., Muller, T., and Brase, S., Org. Biomol. Chem., 2009, vol. 7, pp. 4734–4743. https://doi.org/10.1039/B912189G
Bazhenova, M.A., Kulikov, L.A., Bolnykh, Y.S., Maksimov, A.L., and Karakhanov, E.A., Catal. Commun., 2022, vol. 170, article 106486. https://doi.org/10.1016/j.catcom.2022.106486
Lu, W., Sculley, J.P., Yuan, D., Krishna, R., Wei, Z., and Zhou, H., Angew. Chem. Int. Ed., 2012, vol. 51, no. 30, pp. 7480–7484. https://doi.org/10.1002/anie.201202176
Chen, K., Xie, S., Iglesia, E., and Bell, A.T., J. Catal., 2000, vol. 189, no. 2, pp. 421–430. https://doi.org/10.1006/jcat.1999.2720
Akopyan, A., Polikarpova, P., Vutolkina, A., Cherednichenko, K., Stytsenko, V., and Glotov, A., Pure Appl. Chem., 2021, vol. 93, no. 2, pp. 231–241. https://doi.org/10.1515/pac-2020-0901
Houda, S., Lancelot, C., Blanchard, P., Poinel, L., and Lamonier, C., Catalysts, 2018, vol. 8, no. 9, pp. 344–369. https://doi.org/10.3390/catal8090344
Jiang, W., Dong, L., Liu, W., Guo, T., Li, H.P., Zhang, M., Zhu, W.S., and Li, H.M., RSC Adv., 2017, vol. 7, pp. 55318–55325. https://doi.org/10.1039/c7ra10125b
Zhu, W.S.A., Li, H.M., Gu, Q.Q., Wu, P.W., Zhu, G.P., Yan, Y.S., and Chen, G.Y., J. Mol. Catal. A: Chemical, 2011, vol. 336, pp. 16–22. https://doi.org/10.1016/j.molcata.2010.12.003
Funding
The study was financially supported by the Russian Science Foundation, project no. 22-79-10044, https://rscf.ru/project/22-79-10044/.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare no conflict of interest requiring disclosure in this article.
Rights and permissions
About this article
Cite this article
Akopyan, A.V., Eseva, E.A., Lukashov, M.O. et al. Molybdenum-Containing Catalysts Based on Porous Aromatic Frameworks as Catalysts of Oxidation of Sulfur-Containing Compounds. Pet. Chem. 63, 257–267 (2023). https://doi.org/10.1134/S0965544123010103
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965544123010103