Abstract
The article presents the results of investigation of thermal expansion of ChS-139 steel in the temperature range 20–720 °C. Measurements were carried out by dilatometric method with DIL-402C unit manufactured by NETZSCH (Germany) with the error (1.5–2)×10−7 K−1. The approximation dependences of thermal coefficient of linear expansion on temperature have been obtained and reference tables have been calculated. The abnormal change of expansion coefficient above 550 °C is shown, and the explanation of the phenomenon is given.
References
I. Shkaruba, Time of the Fast, ROSENERGOATOM, 2009, No. 12, P. 6–11.
S.I. Novikova, Thermal Expansion of Solids, Nauka, Moscow, 1974.
R.K. Kirby, Platinum — a thermal expansion reference material, Int. J. Thermophys., 1991, Vol. 12, No. 4, P. 679–685.
S.J. Orfanidis, Introduction to Signal Processing, Prentice Hall, Englewood Cliffs, New Jersey, 1996.
N.P. Lyakishev, State Diagram of Double Metal Systems, Vol. 2, Mashinostroyenie, Moscow, 1997.
V.S. Chirkin, Thermophysical Properties of Materials Used in Nuclear Engineering, Handbook, Atomizdat, Moscow, 1968.
Author information
Authors and Affiliations
Corresponding author
Additional information
The work was financially supported by RF Ministry of Education and Science (Agreement 8073) and the Russian Foundation for Basic Research (Grant No. 12-08-00192_a).
Rights and permissions
About this article
Cite this article
Stankus, S.V., Kozlovsky, Y.M., Yatsuk, O.S. et al. Thermal expansion of ChS-139 steel in temperature range 20–720 °C. Thermophys. Aeromech. 20, 355–358 (2013). https://doi.org/10.1134/S086986431303013X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S086986431303013X