Skip to main content
SpringerLink
Log in

Physical Modeling of Hydrodynamic and Heat Transfer Processes in Liquid-Metal Cooled Nuclear Power Facilities

  • NUCLEAR POWER PLANTS
  • Published:
Thermal Engineering Aims and scope Submit manuscript

Abstract—

The article presents the results from analyzing the application conditions of the thermophysical processes similarity theory as applied to modeling the hydrodynamics and heat transfer in liquid-metal cooled nuclear power facilities, namely, in channels, in the reactor core rod systems, and in the reactor pressure vessel under different operating conditions. It is shown that direct modeling can be used without limitations only for processes whose determined similarity numbers (criteria) are functions of only the system’s geometrical simplexes and one determining criterion. The availability of two determining criteria in the heat transfer description, e.g., the Reynolds and Prandtl numbers, noticeably complicates the modeling. With three determining criteria, direct modeling is impracticable as a rule. In such cases, systematic multivariate experiments must be set up. The aim of such experiments is to reveal the effects that are allowed by the general mathematical model but which cannot be simulated—either analytically or numerically—using state-of-the-art mathematical technologies. It has been shown from numerical and theoretical investigations and from generalization of experiments, including data on temperature distribution patterns in a liquid-metal flow, that the thermal resistance at the coolant–heat-transfer surface interface boundary is essentially zero if the concentration of impurities in the coolant does not exceed their solubility at the circulating metal temperature. In the case of using liquid metals and alloys (Pb, Pb–Bi, Hg, Na, Na–K, Li, etc.), the heat transfer is described under such conditions by a unified dimensionless dependence on the Peclet number. The transfer of heat in fuel assemblies takes place mainly by convective heat transfer, and the temperature field is governed by the increase in liquid-metal temperature. The temperature distribution depends on the classical similarity criteria, including the Reynolds, Peclet (Prandtl), and Grashof criteria, and on the design and thermophysical characteristics of fuel elements and fuel assemblies (the latter serve as the fuel element approximate similarity criterion). Forced circulation in the reactor vessel is simulated in small-scale water models using the Froude and Peclet numbers, and natural circulation is simulated using the Euler number. The similarity of currents in stably stratified coolant zones is determined by the Froude and Peclet numbers and by the local-gradient Richardson number.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.

Similar content being viewed by others

REFERENCES

  1. A. P. Sorokin, Yu. A. Kuzina, A. A. Trufanov, A. A. Kamaev, Yu. I. Orlov, V. V. Alekseev, V. A. Grabezhnaya, and Yu. I. Zagorul’ko, “The challenging thermophysical issues of fast reactors,” Therm. Eng. 65, 725–733 (2018). https://doi.org/10.1134/S0040601518100105

    Article  Google Scholar 

  2. Thermophysical Test Stand Base of Nuclear Power Generation of Russia and Kazakhstan, Ed. by V. A. Pershukov, A. V. Arkhangel’skii, O. E. Kononov, and A. P. Sorokin (FGUP RFYaTs – VNIIEF, Sarov, 2016).

  3. A. A. Gukhman and M. V. Kirpichev, “Theory of models,” Izv. Leningr. Politekh. Inst. Im. M. I. Kalinina 30, 1–50 (1927).

    Google Scholar 

  4. L. I. Sedov, Methods of Similarity and Dimensionality in Mechanics, 4th ed. (Gos. Izd. Nauchno-Tekh. Lit., Moscow, 1957) [in Russian].

    Google Scholar 

  5. M. V. Kirpichev and M. A. Mikheev, Modeling of Thermal Devices in Mechanics (Akad. Nauk SSSR, Moscow, 1936) [in Russian].

    Google Scholar 

  6. A. A. Gukhman, Application of Similarity Theory to Investigation of Heat and Mass Transfer Processes (Vysshaya Shkola, Moscow, 1973) [in Russian].

    Google Scholar 

  7. S. S. Kutateladze, Analysis of Similarity in Thermal Physics (Nauka, Novosibirsk, 1982) [in Russian].

    Google Scholar 

  8. S. S. Kutateladze, Analysis of Similarity and Physical Models (Nauka, Novosibirsk, 1986) [in Russian].

    MATH  Google Scholar 

  9. S. S. Kutateladze, Analysis of Similarity and Physical Models (Nauka, Novosibirsk, 1989), pp. 410–416 [in Russian].

    Google Scholar 

  10. V. V. Yagov, Heat Transfer in One-Phase Media and during Phase Transformations (Mosk. Energ. Inst., Moscow, 2014) [in Russian].

    Google Scholar 

  11. P. L. Kirillov, Yu. S. Yur’ev, and V. P. Bobkov, Handbook on Thermohydraulic Calculations (Nuclear Reactors, Heat Exchangers, Steam Genetarors), 2nd ed., Ed. by P. L. Kirillov (Energoatomizdat, Moscow, 1990) [in Russian].

    Google Scholar 

  12. P. L. Kirillov, M. I. Terent’eva, and N. B. Deniskina, Thermophysical Properties of Nuclear Engineering Materials: Study and Reference Aid, Ed. by P. L. Kirillov (IzdAt, Moscow, 2007) [in Russian].

    Google Scholar 

  13. N. S. Kondrat’ev, “Flow resistance in the liquid metal flow in pipes,” in Heat Transfer and Thermal Modeling (Akad. Nauk SSSR, Moscow, 1959), pp. 93–106.

    Google Scholar 

  14. P. K. Konakov, “Slip coefficient for smooth pipes,” Izv. Akad. Nauk SSSR, No. 7, 1029 (1948).

    Google Scholar 

  15. A. A. Kanaev, “Heat transfer and flow resistance in the mercury flow in pipes,” Kotloturbostroenie, No. 2 (1953).

  16. E. Varburg, “On the flow of mercury in glass capillars,” Ann. Phys. 140, 367 (1870).

    Article  Google Scholar 

  17. D. M. Tolstoi, “Sliding of mercury over glass,” Dokl. Akad. Nauk SSSR. 85, 1329 (1952).

    Google Scholar 

  18. J. Brighton, “Fully developed turbulent flow in a channel of annular section,” Teor. Osnovy Inzh. Raschetov., No. 4, 240 (1964).

  19. V. I. Rachkov, A. P. Sorokin, and A. V. Zhukov, “Thermal hydraulic studies of liquid-metal coolants in nuclear-power facilities,” High Temp. 56, 124–137 (2018).

    Article  Google Scholar 

  20. L. G. Genin, E. V. Kudryavtseva, Yu. A. Pakhotin, and V. G. Sviridov, “Temperature fields and heat transfer in the turbulent liquid metal flow in the initial thermal region,” Teplofiz. Vys. Temp. 16, 1243–1249 (1978).

    Google Scholar 

  21. L. G. Genin, E. V. Kudryavtseva, Yu. A. Pakhotin, and V. G. Sviridov, “On the question of the structure of the temperature field in the turbulent flow in pipes,” Teplofiz. Vys. Temp. 17, 531–538 (1979).

    Google Scholar 

  22. I. A. Belyaev, L. G. Genin, S. G. Krylov, A. O. Novikov, N. G. Razuvanov, and V. G. Sviridov, “Experimental investigations of heat transfer and temperature fields in models simulating fuel assemblies used in the core of a nuclear reactor with a liquid heavy-metal coolant,” Therm. Eng. 62, 645–651 (2015). https://doi.org/10.1134/S0040601515090025

    Article  Google Scholar 

  23. R. Lyon, “Heat transfer coefficient in liquid metals,” Chem. Eng. Prog. 47, 75–81 (1951).

    Google Scholar 

  24. P. L. Kirillov, Heat Transfer of Liquid Metals in Circular Pipes (One- and Two-Phase Flows), Candidate’s Dissertation in Engineering (High Temperature Inst., USSR Akademy of Sciences, Moscow, 1968).

  25. M. Kh. Ibragimov, V. I. Subbotin, and P. A. Ushakov, “Investigation of heat transfer in the turbulent flow of liquid metals in tubes,” At. Energiya 8, 48–50 (1961).

    Article  Google Scholar 

  26. V. D. Talanov and P. A. Ushakov, “Heat transfer in circular, annular and square channels,” in Liquid Metals: Compilation, Ed. by P. L. Kirillov, V. I. Subbotin, and P. A. Ushakov (Atomizdat, Moscow, 1967), pp. 9–15.

    Google Scholar 

  27. V. I. Subbotin, P. A. Ushakov, and B. N. Gabrianovich, “Heat transfer in the flow of liquid metals,” Inzh. Fiz. Zh. 4 (4), 16–21 (1963).

    Google Scholar 

  28. B. S. Petukhov, L. G. Genin, S. A. Kovalev, S. L. Solov’ev, Heat Transfer in Nuclear Energy Units (Mosk. Energ. Inst., Moscow, 2003) [in Russian].

    Google Scholar 

  29. P. L. Kirillov, “Heat transfer in turbulent flow. Part 2. Velocity and temperature distributions,” At. Energy 122, 230–242 (2017).

    Article  Google Scholar 

  30. V. M. Borishanskii, S. S. Kutateladze, I. I. Novikov, and O. S. Fedynskii, Liquid-Metal Coolants (Atomizdat, Moscow, 1976) [in Russian], pp. 124–125.

    Google Scholar 

  31. V. I. Subbotin, M. N. Ivanovskii, and Yu. I. Orlov, “Thermal contact resistance in the cooling of channels with liquid metals,” Teplofiz. Vys. Temp. 5, 1025–1031 (1967).

    Google Scholar 

  32. P. A. Ushakov, “Approximate thermal simulation of cylindrical fuel elements,” in Liquid Metals: Compilation, Ed. by V. I. Subbotin, P. L. Kirillov, and P. L. Ushakov (Atomizdat, Moscow, 1967), pp. 137–148 [in Russian].

    Google Scholar 

  33. V. I. Subbotin, M. Kh. Ibragimov, P. A. Ushakov, V. P. Bobkov, A. V. Zhukov, and Yu. S. Yur’ev, Hydrodynamics and Heat Transfer in Nuclear Power Generating Units (Basics of Calculation) (Atomizdat, Moscow, 1975) [in Russian].

    Google Scholar 

  34. P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Heat transfer to liquid metals in regular arrays of fuel elements,” High Temp. 15, 868–873 (1977).

    Google Scholar 

  35. V. M. Borishanskii, M. A. Gotovskii, and E. V. Firsova, “Heat transfer to liquid metals in longitudinally wetted bundles of rods,” At. Energy 27, 1347–1350 (1969).

    Article  Google Scholar 

  36. P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Thermal fields of rod-type fuel elements situated in regular lattices streamlined by a heat carrier,” High Temp. 14, 482–488 (1976).

    Google Scholar 

  37. N. I. Buleev and R. Ya. Mironovich, “Heat Transfer in a turbulent liquid flow in a triangular grid of rods,” Teplofiz. Vys. Temp. 10, 1031–1038 (1972).

    Google Scholar 

  38. P. A. Ushakov, A. V. Zhukov, and N. M. Matyukhin, “Azimuthal temperature nonuniformity in a regular array of fuel elements for turbulent liquid metal flow,” High Temp. 15, 64–71 (1977).

    Google Scholar 

  39. A. V. Zhukov, A. P. Sorokin, and N. M. Matyukhin, Interchannel Transfer in Fuel Assemblies of Fast Reactors: Theoretical Fundamentals and Physics of the Process (Energoatomizdat, Moscow, 1989) [in Russian].

    Google Scholar 

  40. H. Takeda, T. Koga, and J. Kanno, “Study on similarity rule for natural convection water test of LMFBR,” in Evaluation of Decay Heat Removal by Natural Convection: Proc. Specialists Meeting of International Atomic Energy Agency, Japan, Feb. 22–23, 1993 (IAEA, Vienna, 1993), pp. 58–66.

  41. P. A. Ushakov, A. P. Sorokin, and N. M. Matyukhin, “The role of hydraulic resistances in simulating natural convection in vessels of fast reactors using water,” Therm. Eng. 47, 383–389 (2000).

    Google Scholar 

  42. P. A. Ushakov and A. P. Sorokin, “Modeling problems of emergency natural convection heat removal in the upper plenum of LMR using water,” in Proc. 8th Int. Conf. on Nuclear Engineering (ICONE-8). USA, Baltimore, MD, Apr. 2–6, 2000 (ASME, New York, 2000), paper id. ICONE-8078.

  43. F. Hofmann, C. Essing, S. Georgeours, and D. Tenchine, “Investigation on natural convection decay heat removal for the EFR status of program,” in Evaluation of Decay Heat Removal by Natural Convection: Proc. Specialists Meeting of International Atomic Energy Agency, Japan, Feb. 22–23, 1993 (IAEA, Vienna, 1993), pp. 1–25.

  44. A. N. Opanasenko, A. P. Sorokin, D. G. Zaryugin, and A. A. Trufanov, “Fast reactor: An experimental study of thermohydraulic processes in different operating regimes,” Therm. Eng. 64, 336–344 (2017). https://doi.org/10.1134/S0040601517050056

    Article  Google Scholar 

  45. A. N. Opanasenko, A. P. Sorokin, A. A. Trufanov, N. A. Denisova, E. V. Sviridov, N. G. Razuvanov, V. G. Zagorskii, and I. A. Belyaev, “Experimental studies of coolant temperature and velocity on an integrated water model of a fast reactor in different operating regimes,” At. Energy 123, 25–33 (2017).

    Article  Google Scholar 

  46. H. Schulz, “Experience with thermal fatigue in LWR piping caused by mixing and stratification. Historical perspective,” in Proc. Specialists Meeting on Experience with Thermal Fatigue in LWR Piping Caused by Mixing and Stratification, Paris, France, Jun. 8–10, 1998 (Organisation for Economic Co-operation and Development, Paris, 1998), pp. 13–18.

Download references

Author information

Authors and Affiliations

  1. State Scientific Center of the Russian Federation Leipunsky Institute of Physics and Power Engineering, 249033, Obninsk, Kaluga oblast, Russia

    A. P. Sorokin & Yu. A. Kuzina

Authors
  1. A. P. Sorokin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu. A. Kuzina
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. P. Sorokin.

Additional information

Translated by V. Filatov

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sorokin, A.P., Kuzina, Y.A. Physical Modeling of Hydrodynamic and Heat Transfer Processes in Liquid-Metal Cooled Nuclear Power Facilities. Therm. Eng. 66, 533–542 (2019). https://doi.org/10.1134/S0040601519080093

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0040601519080093

Keywords:

Search

Navigation