Thermal Engineering

, Volume 65, Issue 4, pp 208–211 | Cite as

Graphical Toolkit for Easy and Rapid Evaluation of the Residual Heat Generation at Cyclic Operation of a Pool Type Research Reactor

Nuclear Power Plants
  • 10 Downloads

Abstract

The present paper considers the approach to easy and rapid evaluation of the residual heat generation in the reactor core of a pool type research reactor after shutdown taking into account the previous operation cycles at constant operating cycle parameters. The selected mathematical model of the process is well-founded. The frames of the operational parameters and assumptions of the study are defined. The operating power level of 2000 kW and operation/shutdown schedules of 4/20, 6/18, 8/16, 10/14 and 12/12 hours per day during the five working days of the week and shutdown for the weekend are considered. The calculations are prepared for the first 180 seconds and the first 120 minutes after the fission reaction is stopped by the reactor scram system. The calculation results for the power of the residual heat generation in the reactor core at different work schedule are presented graphically as a percentage of the nominal power. For each particular work schedule the number of previous working weeks taken into account, the value of the correction coefficient and the share of the previous operating cycles in the residual heat generation power are presented in tables. The calculation results are discussed from the point of view of the safety analyses assessment and the nuclear fuel cycle management. Some possible directions for further research works are outlined and defined as particular tasks.

Keywords

residual heat generation cyclic operational mode safety analyses and assessments 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Safety Assessment of Research Reactors and Preparation of the Safety Analysis Report. Safety Guide, in Ser.: IAEA Safety Series, No. 35-G1 (IAEA, 1994).Google Scholar
  2. 2.
    O. B. Samoylov, G. B. Usinin, and A. M. Bahmetyev, Safety of Nuclear Power Plants (Energoatomizdat, Moscow, 1989) [in Russian].Google Scholar
  3. 3.
    Proc. Meeting of Experts to Exchange Experiences Reconstruction of Research Reactors in Member Countries of CMEA, Moscow, 1982 (TsNIIatinform, Moscow, 1984).Google Scholar
  4. 4.
    S. Kadalev, “Safety analysis method in case of blackout accident on pool type research reactor,” Prog. Nucl. Energy 78, 121–135 (2015).CrossRefGoogle Scholar
  5. 5.
    S. Kadalev, “Assessment of residual heat generation at cyclic operation of a research reactor as input data for thermal hydraulic calculations and safety analysis,” Ann. Nucl. Energy 72, 182–188 (2014).CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  1. 1.Nuclear Scientific Experimental and Educational Centre, Institute for Nuclear Research and Nuclear EnergyBulgarian Academy of Science, BulgariaSofiaBulgaria

Personalised recommendations