Abstract
The results of computational hydrodynamic simulation of the flow of a working medium in the flow path of the feedwater control assembly used in power units of nuclear power plants (NPPs) equipped with the reactors of the RBMK-1000 type are presented It was established that the rate of control valve opening has an influence on the position of the areas of the intense local erosion-corrosion thinning of metal of the diffuser section downstream of the valve.
Similar content being viewed by others
References
V. N. Lovchev, D. F. Gutsev, G. V. Tomarov, A. A. Shipkov, and N. S. Koreshkova, “Results from additional field examination of pipelines carried out at Russian nuclear power stations in accordance with the Mihama program,” Therm. Eng. 58, No. 5, 412 (2011).
G. V. Tomarov, A. A. Shipkov, and N. S. Koreshkova, “Calculated and experimental substantiation of operating conditions under which adequate erosion resistance of valves used in power units at nuclear power stations is ensured,” Therm. Eng. 57, No. 5, 382 (2010).
G. Tomarov and A. Shipkov, “Identification of erosive constituent type and dominating metal deterioration mechanism for power equipment in single-phase flow,” in Proc. of the Intern. Conf. on Flow Acceleration Corrosion, March 18–20, Lion, France.
G. V. Tomarov, A. I. Usanov, M. Yu. Kanyshev, A. V. Shutikov, A. V. Zelenin, V. A. Gilev, S. V. Yakushev, A. A. Shipkov, B. L. Podvolotskii, N. S. Koreshkova, and S. V. Shepelev, ”Operative management of activities on monitoring the erosion-corrosion state of elements use in the condensate-feedwater path of a nuclear power station,” Therm. Eng. 57, No. 1, 51 (2010).
Author information
Authors and Affiliations
Additional information
Original Russian Text © G.V. Tomarov, A.A. Shipkov, T.N. Golubeva, P.N. Greblov, 2013, published in Teploenergetika.
Rights and permissions
About this article
Cite this article
Tomarov, G.V., Shipkov, A.A., Golubeva, T.N. et al. An investigation of the effect of hydrodynamics of flow on erosion-corrosion resistance of components of a feedwater control assembly used in power units of nuclear power plants equipped with RBMK-1000 reactors. Therm. Eng. 60, 591–597 (2013). https://doi.org/10.1134/S0040601513080090
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601513080090