Abstract
A numerical calculation of the new fuel assembly for a VVER-1000 reactor containing fuel on the basis of pebble fuel elements is carried out. The reactor core pressure drop coefficients in the axial and radial directions are studied.
Similar content being viewed by others
References
E. V. Bocharova, A. T. Komov, and Yu. N. Tokarev, “Numerical Simulation of Hydrodynamic and Heat Transfer Processes in Fuel Assemblies Containing Pebble Fuel Elements,” Vestnik MEI, No. 2, 43–47 (2009).
N. N. Ponomarev-Stepnoi, N. E. Kukharkin, A. A. Khrulev, et al., “Prospects for Development of Pebble Fuel Elements in VVER Reactors,” At. Energ. 86(6), 443–449 (1999).
M. E. Aerov and O. M. Todes, Hydraulic and Thermal Principles of the Operation of Apparatuses with Stationary and Fluidized Granular Beds (Khimiya, Moscow, 1968) [in Russian].
I. Idel’chik, A Handbook on Hydraulic Resistances (Mashinostroenie, Moscow, 1992) [in Russian].
E. I. Grishanin, E. E. Denisov, A. Ya. Lyubin, and L. N. Fal’kovskii, “Development of a Mathematical Model for Calculating the Parameters of Coolant in a Light Water Reactor’s Fuel Assembly Containing Pebble Fuel Elements,” Tyazh. Mashinostr., No. 9, 11–20 (1995).
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.V. Bocharova, Yu.N. Tokarev, A.T. Komov, 2010, published in Teploenergetika.
Rights and permissions
About this article
Cite this article
Bocharova, E.V., Tokarev, Y.N. & Komov, A.T. Numerical simulation of fuel assemblies containing pebble fuel elements. Therm. Eng. 57, 1070–1074 (2010). https://doi.org/10.1134/S0040601510120128
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601510120128