Abstract
Equipment and systems used to prepare fuel for firing and gasification in power installations with circulating and stationary fluidized beds are described. Results are presented from the development, investigation, and industrial tests of centrifugal cutting crushers using which it is possible to obtain fuel with the fractional composition required for reliable and efficient operation of power installations with circulating and stationary fluidized beds.
Similar content being viewed by others
References
V. Z. Leikin, V. V. Stropus, V. V. Prakhin, et al., A Fuel Preparation System for a Fluidized-Bed Boiler, Trudy TsKTI, No. 276, 13–17 (1993).
V. Z. Leikin, P. M. Luzin, and V. E. Maslov, A Fuel Preparation System for a PGU-250 Combined-Cycle Plant with Intra-Cycle Gasification of Solid Fuel in a Fluidized Bed, Trudy TsKTI, No. 197, 71–77 (1982).
Yu. N. Vtyurin, V. V. Konovalov, A. V. Motorin, and A. N. Bychkov, The Development and Calculation of a Fuel Preparation and Feed System, Bed Filler, and Sorbent for Fluidized-Bed Boilers, in New Technologies for Firing Solid Fuel: State of the Art and Future Use (VTI, Moscow, 2001), pp. 216–236.
V. I. Kazakov and V. V. Demkin, New Technologies and Equipment for Unloading, Transportation, Preparation, and Stockpiling of Fuel at Coal-Fired Thermal Power Stations, in New Technologies for Firing Solid Fuel: State of the Art and Future Use (VTI, Moscow, 2001), pp. 181–195.
V. Z. Leikin and V. P. Neradov, A Centrifugal Crusher, USSR Inventor’s Certificate No. 1217467, Byull. Izobret., No. 10 (1986).
V. Z. Leikin and V. P. Neradov, A Centrifugal Crusher for Brittle Materials, USSR Patent No. 1685519, Byull. Izobret., No. 39 (1991).
V. Z. Leikin and V. P. Neradov, A Centrifugal Crusher, RF Inventor’s Certificate No. 1782654, Byull. Izobret., No. 47 (1992).
V. Z. Leikin and V. P. Neradov, Crushing Device, US Patent No. 5046670, September 10, 1991.
V. Z. Leikin and V. P. Neradov, A Crusher for Fluidized-Bed Thermal Power Installations, TsOONTI-NIIEinformenergomash (Moscow), No. 86, 248.
V. P. Neradov and V. Z. Leikin, Development of Crushing Equipment for Fluidized-Bed Thermal Power Installations, Trudy TsKTI, No. 276 (1993).
V. P. Neradov and M. V. Kremen’, Results of Tests Carried out on a DR-25 Crusher, Trudy TsKTI, No. 276, 47–52 (1993).
V. Z. Leikin, P. M. Luzin, and V. E. Maslov, Development, Investigation, and Simulation of Fuel Preparation Equipment for Fluidized-Bed Thermal Power Installations, Trudy TsKTI, No. 228, 14–32 (1986).
V. Z. Leikin, P. M. Luzin, and V. E. Maslov, Studying the Processes of Pelletizing Coal Fines for Fluidized-Bed Thermal Power Installations, Energomashinostroenie, No. 8, 8–14 (1986).
V. N. Shemyakin, K. I. Mishina, and V. E. Razumov, Comparative Investigations of Firing and Gasification of Crushed Fuel and Fuel Pellets in a Fluidized-Bed Test Bench, Trudy TsKTI, No. 228, 69–76 (1986).
S. I. Suchkov, V. Z. Leikin, Yu. L. Papushin, and A. A. Abrosimov, Experimental Development of a Technology for Preparation and Gasification of Low-Reaction Coals and Wastes Using Air Blasting, Teploenergetika, No. 8, 15–21 (2003) [Therm. Eng., No. 8 (3003)].
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Leikin, V.Z. Development of Equipment and Perfection of Technology to Prepare Fuel for the Firing and Gasification in Circulating and Stationary Fluidized Beds. Therm. Eng. 55, 83–93 (2008). https://doi.org/10.1134/S0040601508010175
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601508010175