Abstract
Nanocomposites consisting of the heat-resistant amorphous constructional polymer polysulfone and an organomodified nanosilicate have been synthesized. The effect of the method of introduction of the nanosilicate into the thermoplastic matrix on the processing and performance characteristics of the resulting polymer-silicate nanocomposite has been investigated. The most efficient method of obtaining the composite is extrusion mixing using a nanosilicate superconcentrate.
Similar content being viewed by others
References
Chang, J.-H., An, Y.U., Kim, S.J., and Im, S., Poly(butylene terephthalate)/Organoclay Nanocomposites Prepared by In Situ Interlayer Polymerization and Its Fiber, Polymer, 2003, vol. 44, p. 5655.
Chang, J.-H., Kim, S.J., Joo, Y.L., and Im, S., Poly(ethylene terephthalate) Nanocomposites by In Situ Interlayer Polymerization: The Thermomechanical Properties and Morphology of the Hybrid Fibers, Polymer, 2004, vol. 45, p. 919.
Sergeev, G.B., Nanokhimiya (Nanochemistry), Moscow: Mosk. Gos. Univ., 2003.
Polymer-Clay Nanocomposites, Pinnavaia, T.J. and Beall, G.W., Eds., New York: Wiley, 2000.
Worrall, U., Clays and Ceramic Raw Materials, London: Applied Science, 1975.
Delozier, D.M., Orwoll, R.A., Cahoon, J.F., et al., Polyimide Nanocomposites Prepared from High-Temperature, Reduced Charge Organoclays, Polymer, 2003, vol. 44, p. 2231.
Shen, Y.-H., Preparations of Organobentonite Using Nonionic Surfactants, Chemosphere, 2001, vol. 44, p. 989.
Delozier, D.M., Orwoll, R.A., Cahoon, J.F., et al., Preparation and Characterization of Polyimide/Organoclay Nanocomposites, Polymer, 2002, vol. 43, p. 813.
Zaikov, G.E. and Lomakin, S.M., Fire-Resistant Polymer Nanocomposites Based on Layered Silicates, Khimicheskaya i biologicheskaya kinetika: Novye gorizonty (Chemical and Biological Kinetics: New Horizons), vol. 1: Khimicheskaya kinetika (Chemical Kinetics), Moscow: Khimiya, 2005, p. 37.
Vlasov, S.V., Kandyrin, L.B., Kulezvev, V.N., et al., Osnovy tekhnologii pererabotki plastmass (Principles of Polymer Processing), Moscow: Khimiya, 2004.
Kornev, A.E., Bukanov, A.M., and Sheverdyaev, O.N., Tekhnologiya elastomernykh materialov (Elastomer Production Technology), Moscow: Eksim, 2000.
Torner, R.V., Teoreticheskie osnovy pererabotki polimerov (Theoretical Foundations of Polymer Processing), Moscow: Khimiya, 1977.
Laboratornyi odnoshnekovyi ekstruder (Laboratory Single-Screw Extruder), Certificate, Scamia, France, 1983.
Khmelev, V.N., Shalunov, A.V., and Khmelev, M.V., Design and Use of Specialized Ultrasonic Equipment for Obtaining Constructional Materials, Materialy Vtorogo mezhdunarodnogo foruma po nanotekhnologiyam (Proc. Second Int. Forum on Nanotechnologies), Moscow, 2009, p. 421.
Liniya granulirovaniya kompozitsionnykh materialov LGKM 34/34 (Composite Granulation Line LGKM 34/34), Certificate 24.079 PS.
Burnside, S.D. and Giannelis E.P., Synthesis and Properties of New Poly(dimethylsiloxane) Nanocomposites, Chem. Mater., 1995, vol. 7, p. 1597.
Ivanyuk, A.V., Gerasin, V.A., Rebrov, A.V., et al., Exfoliated Clay-Polyethylene Nanocomposites Prepared by In Situ Polymerization: Synthesis, Structure, and Properties, Inzh.-Fiz. Zh., 2005, vol. 78, no. 5, p. 87.
Mikitaev, A.K., Kaladzhyan, A.A., Lednev, O.B., et al., Polymer Nanocomposites Based on Organoclays, Plast. Massy, 2004, no. 12, p. 45.
Dubnikova, I.L. and Oshmyav, V.G., The Effect of Inclusion Size on the Interfacial Debonding Processes and Yield Stress of Filled Highly Plastic Polymers, Polym. Sci, Ser. A: Polym. Phys., 1998, vol. 40, no. 9, p. 925.
Kriterii vybora polimernykh materialov (Polymer Selection Criteria), Ulyanovsk: NPK Polimernye Materialy i Kompozity.
Mather, P.T., Jeon, H.G., Romo-Uribe, A., et al., Hybrid Organic-Inorganic Thermoplastics: Styryl-Based Polyhedral Oligomeric Silsesquioxane Polymers, Macromolecules, 1996, vol. 29, p. 7302.
Hsu, S.L.C. and Chang, K., C, Synthesis and Properties of Polybenzoxazole-Clay Nanocomposites, Polymer, 2002, vol. 43, p. 4097.
Mikitaev, A.K., Kaladzhyan, A.A., Lednev, O.B., et al., Fire-Resistant Polymer Nanocomposites Based on Organoclays, Plast. Massy, 2005, no. 4, p. 36.
Chang, J.H., Seo B.S., Hwang D.H, An Exfoliation of Organoclay in Thermotropic Liquid Crystalline Polyester Nanocomposites, Polymer, 2002, vol. 43, p. 2969.
Yano, K., Usuki, A., and Okada, A., J. Polym. Sci., Part A: Polym. Chem., 1997, vol. 35, p. 2289.
Fornes, T.D., Yoon, P.J., Hunter, D.L., et al., Effect of Organoclay Structure on Nylon 6 Nanocomposite Morphology and Properties, Polymer, 2003, vol. 43, p. 5915.
Wen, J. and Wikes, G.L., Organic/Inorganic Hybrid Network Materials by the Sol-Gel Approach, Chem. Mater., 1996, vol. 8, p. 1667.
Zhu, Z.K., Yang, Y., Yin, J., et al., Preparation and Properties of Organosoluble Montmorillonite/Polyimide Hybrid Materials, J. Appl. Polym. Sci., 1999, vol. 73, p. 2063.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © T.S. Volkova, E.Ya. Beider, 2010, published in Khimicheskaya Tekhnologiya, 2010, Vol. 11, No. 5, pp. 257–268.
Rights and permissions
About this article
Cite this article
Volkova, T.S., Beider, E.Y. Preparation of a polysulfone-based polymer-silicate nanocomposite. Theor Found Chem Eng 45, 717–725 (2011). https://doi.org/10.1134/S0040579511050162
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040579511050162