Abstract
The adhesion of a metallic coating to a carbon tape after its treatment with cold plasma under various conditions is experimentally studied, and the optimum conditions are selected. Plasma treatment is found to increase the adhesion strength estimated by adhesive tape testing by several times. A metallic coating is deposited onto a carbon tape after plasma treatment by magnetron sputtering. A carbon tape with a metallic coating is used to fabricate carbon-fiber reinforced plastics (CFRPs) with an epoxy binder, and the plastics are molded using vacuum infusion. A metallic coating made of stainless steel on a carbon tape is found to increase the interlayer shear strength of CFRPs by 40%; a titanium coating, by 30%; and a copper coating, by 13%.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.REFERENCES
S. L. Bazhenov, A. A. Berlin, A. A. Kul’kov, and V. G. Oshmyan, Polymer Composite Materials (Izd. Dom Intellekt, Dolgoprudnyi, 2010).
N. I. Baurova and V. A. Zorin, Use of Polymer Composite Materials in the Production and Repair of Machines: A Tutorial (MADI, Moscow, 2016).
E. N. Kablov, “Key problem is materials,” in Trends and Guidelines for Innovative Development in Russia (VIAM, Moscow, 2015), pp. 458–464.
Y. Y. Shimina and G. V. Malysheva, “Determination of failure-free operation probability in adhesive joints at high temperatures,” Polym. Sci. D 8 (3), 207–210 (2015).
M. A. Gorodetskii, V. A. Nelyub, G. V. Malysheva, et al., “Technology of forming and the properties of reinforced composites based on an inorganic binder,” Russ. Metall. (Metally), No. 13, 1195–1198 (2018).
P. P. Maung and G. V. Malysheva, “Elaboration of the technology of producing space antenna reflector,” Polym. Sci. D 10 (4), 364–367 (2017).
V. A. Kalinchev and D. A. Yagodnikov, Technology for the Production of Solid Propellant Rocket Engines: A Tutorial (Izd. MGTU, Moscow, 2011).
I. F. Kobylkin and V. V. Selivanov, Materials and Structures of Light Armor Protection: A Tutorial (Izd. MGTU, Moscow, 2014).
Y. Chen, M. A. Gorodetskii, V. A. Nelyub, and G. V. Malysheva, “Algorithm for optimization of technological conditions for molding composites based on an epoxy matrix,” Tekhn. Met., No. 2, 18–22 (2019).
V. A. Nelyub, “Technology of applying metal coatings onto the surface of carbon tapes,” Khim. Prom. Segodnya, No. 5, 15–21 (2018).
P’e Phu Maung, V. A. Nelyub, and G. V. Malysheva, “Determination of permeability coefficients for carbon fabrics with metal coatings,” Vestn. Tekhn. Univ. 22 (1), 70–73 (2019).
N. I. Baurova, V. A. Zorin, and V. M. Prikhoko, “Description of scenarios of transition of material from an operable to inoperable state using an equation of fold catastrophe theory,” Polym. Sci. D 8 (1), 1–5 (2015).
N. I. Baurova, V. A. Zorin, and V. M. Prikhoko, “Taking into account the factors of technological heredity by technological mechanics,” Polym. Sci. D 9 (4), 402–406 (2016).
A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders, and Adhesive Prepregs, Ed. by E. N. Kablov (VIAM, Moscow, 2017).
Funding
This work was supported in part by the Russian Foundation for Basic Research, project no. 18-29-19034/18 Development of Theoretical and Technological Foundations for the Manufacture of High-Strength Carbon Fiber Reinforced Plastics with a Set of New Functional Properties Based on Metallized Fibers.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Nelyub, V.A. Effect of Plasma Treatment of a Carbon Tape before the Deposition of a Metallic Coating onto It. Russ. Metall. 2020, 1502–1506 (2020). https://doi.org/10.1134/S0036029520130285
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029520130285