Abstract
The compacts produced from Ni–Mg metal powders by explosion and intended for commercial alloying of wear- and heat-resistant steels, cast irons, and special-purpose alloys are investigated. The optimum parameters of shock-wave compaction of Ni–Mg–Mo–W and Ni–Mg powder mixtures are calculated and experimentally confirmed. A cylindrical storage ampule with a polymetallic powder mixture is loaded with an explosive charge, which generates a cylindrically convergent shock wave to provide an all-round uniform compression of the ampule. High-density compacts (>98% of the theoretical density) with the same initial phase composition are synthesized from powders with highly different properties.
Similar content being viewed by others
REFERENCES
N. V. Trofimov, A. A. Leonov, V. A. Duyunova, and Z. P. Uridiya, “Magnesium cast alloys,” Trudy VIAM 48 (12), 3–12 (2016).
F. G. Lovshenko, G. F. Lovshenko, and I. A. Lozikov, “Development of mechanically alloyed nanostructured modifying alloys for production of high-strength submicrocrystalline bronzes for electrical devices,” Lit’e Metall. 70 (2), 116–126 (2013).
V. V. Zakharov, “On alloying of aluminium alloys with transition metals,” Metalloved. Term. Obrab. Met. 740 (12), 3–8 (2017).
A. G. Slutskiy, A. S. Kalinichenko, and V. A. Sheinert, “Energy-saving technology for production of molybdenum-based master alloys,” Lit’e Metall. 75 (2), 91–94 (2014).
O. G. Ospennikova, “Tendencies of development of low-density heat-resistant nickel alloys with polycrystalline and single-crystal structures,” Aviats. Mater. Technol. 40 (1), 3–19 (2016).
E. B. Chabina, E. V. Filonova, V. S. Lomberg, and M. M. Bakradze, “Structure of the modern deformable nickel alloys,” in All Materials.Encyclopedic Reference Book (2012), Vol. 6, pp. 22–27.
F. N. Karachevtsev, T. N. Zagvozdkina, and G. V. Orlov, “Development and investigation of the metrological features of express analysis of heat-resistant nickel alloys,” Trudy VIAM 11, 67–72 (2015).
V. V. Gostishchev, S. N. Khimukhin, E. D. Kim, and E. Kh. Ri, “Production of the complex-alloyed nickel aluminides and the master alloys of complex composition by the metal oxides metallothermy,” Tsvetn. Met., No. 10, 79–84 (2017).
Sh. Yang, B. Gao, Zh. Wang, Zh. Shi, Y. Ban, H. Kan, X. Cao, and Zh. Qiu, “Preparation of Al–Sc alloys by molten salts electrolysis,” Light Met. No. 2, 54–57 (2007).
P. A. Miloserdov, V. A. Gorshkov, and V. I. Yukhvid, “SHS metallurgy of nickel-based alloying compositions for the manufacture of high-temperature steels,” Russ. Metall. (Metally), No. 5, 666–670 (2013).
L. B. Pervukhin, M. I. Alymov, I. V. Saikov, R. D. Kapustin, O. L. Pervukhina, and E.V.Petrov, “Explosive compaction of ceramic powders,” Pis’ma Mater. 5 (1), 57–60 (2016).
V. I. Mali and T. S. Teslenko, “Structure and properties of explosively compacted copper–molybdenum,” Fiz. Goreniya Vzryva 38 (4), 106–111 (2002).
V. D. Rogozin, Explosive Processing of Powder Materials (Gos. Tech. Univ., Volgograd, 2002).
V. F. Nesterenko, Pulsed Loading of Heterogeneous Materials (Nauka, Novosibirsk, 1992).
R. Prummer, Explosive Treatment of Powder Materials (Mir, Moscow, 1990).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by T. Gapontseva
Rights and permissions
About this article
Cite this article
Kapustin, R.D., Petrov, E.V., Saikov, I.V. et al. Explosive Compaction of Ni–Mg Master Alloys. Russ. Metall. 2020, 536–539 (2020). https://doi.org/10.1134/S0036029520050079
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029520050079