Abstract
Optical and transmission electron microscopy, X-ray diffraction analysis, nanoindentation, measurements of wear, and mechanical uniaxial tensile tests have been used to study the effect of ultrasonic impact surface treatment on the fine structure and the mechanical properties of the surface layers and the deformation behavior of TiNi(Fe, Mo) bulk single crystal samples.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. I. Lotkov, A. A. Baturin, V. N. Grishkov, P. V.Kuznetsov, V. A. Klimenov, and V. E. Panin, “Structural defects and mesorelief of the titanium nickelide surface after severe plastic deformation by an ultrasonic method,” Fiz. Mezomekh. 8, S109–S112 (2005).
T. Hu, C. S. Wen, G. Y. Sun, S. L. Wu, C. L. Chu, Z.W. Wu, G. Y. Li, J. Lu, K. W. K. Yeung, and P. K. Chu, “Wear resistance of NiTi alloys after surface mechanical attrition treatment,” Surf. Coat. Technol. 205, 506–510 (2010).
T. Hu, C. L. Chu, S. L. Wu, R. Z. Xu, G. Y. Sun, T. F. Hung, K. W. K. Yeung, Z. W. Wu, and G. Y. Li, “Microstructural evolution in NiTi alloy subjected mechanical attrition treatment and mechanism,” Intermetallics 19, 1136–1145 (2011).
T. Hu, C. L. Chu, S. L. Wu, Y. C. Xin, J. Lu, and P. K. Chu, “Surface hardening of NiTi shape memory alloy induced by nanostructured layer after surface mechanical attrition treatment,” J. Nanosc. Nanotechnol. 11, 10954–10957 (2011).
V. N. Khachin, V. G. Pushin, and V. V. Kondrat’ev, Titanium Nickelide: Structure and Properties (Nauka, Moscow, 1992) [in Russian].
V. N. Zhuravlev and V. G. Pushin, Alloys with Thermomechanical Memory and Their Application in Medicine (Ural. Otd. Ross. Akad. Nauk, Ekaterinburg, 2000) [in Russian].
V. E. Gyunter, V. N. Khodorenko, and Yu. F. Yasenchuk, Titanium Nickelide. Medicine Material of New Generation (MITs, Tomsk, 2006) [in Russian].
Yu. V. Mil’man, “New methods of micromechanical testings of materials by hard indenter local loading,” in Contemporary Material Science. 21st Century (Naukova Dumka, Kiev, 1998), pp. 637–656 [in Russian].
Yu. I. Golovin, Nanoindenting and Its Possibilities (Mashinostroenie, Moscow, 2009) [in Russian].
D. Vojtech, J. Fojt, L. Joska, and P. Novak, “Surface treatment of NiTi shape memory alloy and its influence on corrosion behavior,” Surf. Coat. Technol. 204, 3895–3901 (2010).
N. S. Surikova, A. N. Tyumentsev, and O. V. Evtushenko, “Stress-induced martensitic transformations in [001] crystals on titanium nickelide and its relation to mechanical twinning in the B2-phase,” Russ. Phys. J. 52, 612–621 (2009).
N. S. Surikova, O. V. Evtushenko, and V. A. Pavlyuk, “Strain localization and peculiarities of the temperature dependence of yield stress in TiNi-based single crystals,” Fiz. Mezomekh. 12, 103–110 (2009).
A. N. Tymentsev, N. S. Surikova, I. Yu. Litovchenko, Yu. P. Pinzhin, A. D. Korotaev, and O. V. Lysenko, “Mechanism of deformation and crystal lattice reorientation in strain localization bands and deformation twins of the B2 phase of titanium nickelide,” Acta Mater. 52, 2067–2074 (2004).
W. J. Moberly, Mechanical Twinning and Twinless Martensite in Ternary Ti50Ni50–xMx Intermetallics (UMJ Dissertation Services, No. 9205888, Stanford Univ., 1991).
N. S. Surikova, A. N. Tyumentsev, and G. F. Korznikova, “Special features of structural transformations during formation of nanocrystalline and amorphous states in B2 phase of titanium nickelide at plastic deformation during torsion under pressure,” Perspekt. Mater. Spets. Vypusk: Ul’tramelkozern. Nanostrukt. Mater., No. 7, 305–310 (2009).
N. S. Surikova, A. A. Klopotov, and E. A. Korznikova, “Mechanisms of plastic deformation in microcrystalline and nanocrystalline TiNi-based alloys,” Phys. Met. Metallogr. 110, 269–278 (2010).
N. S. Surikova and E. A. Korznikova, “Structural fragmentation in TiNi(Fe,Mo) single crystals during intense plastic deformation,” Steel Transl., No. 10, 630–634 (2013).
V. G. Pushin and R. Z. Valiev, “The nanostructured TiNi shape memory alloys: New properties and applications,” Solid State Phenom. 94, 12–21 (2003).
V. G. Pushin, R. Z. Valiev, E. Z. Valiev, N. I. Kourov, N. I. Kuranova, V. V. Makarov, A. V. Pushin, and A. N. Uksusnikov, “Phase and structural transformations in Ti49.5Ni50.5 alloy with a shape-memory effect during torsion under high pressure,” Phys. Met. Metallogr. 113, 256–270 (2012).
V. G. Pushin, N. I. Kourov, N. I. Kuranova, A. V. Pushin, A. N. Uksusnikov, “Structure and phase transformations in TiNiFe ternary alloys subjected to plastic deformation by high-pressure torsion and subsequent heat treatment,” Phys. Met. Metallogr. 115, 365–379 (2014).
S. K. Wu, A. G. Khachaturyan, and C. M. Wayman, “Superstructure of interstitial ordering of oxygen in TiNi alloys,” Acta Metall. 36, 2065–2070 (1988).
K. J. Johnson, Contact Mechanics (Cambridge Univ., Cambridge, 1985).
D. Tabor, “Indentation hardness: Fifty years on. A personal view,” Philos. Mag. 74, 1207–1212 (1996).
N. K. Myshkin and M. I. Petrokovets, Tribology. Principles and Applications (IMMS NANB, Gomel’, 2002).
K. Otsuka and X. Ren, “Physical metallurgy of Ti–Ni–based shape memory alloys,” Prog. Mater. Sci. 50, 511–678 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.S. Surikova, N.A. Narkevich, N.Yu. Surikov, I.V. Vlasov, S.V. Ovchinnikov, Yu.P. Mironov, B.P. Gritsenko, 2016, published in Fizika Metallov i Metallovedenie, 2016, Vol. 117, No. 10, pp. 1096–1104.
Rights and permissions
About this article
Cite this article
Surikova, N.S., Narkevich, N.A., Surikov, N.Y. et al. Effect of ultrasonic impact treatment on the mechanical properties of titanium nickelide single crystal. Phys. Metals Metallogr. 117, 1061–1069 (2016). https://doi.org/10.1134/S0031918X16100136
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X16100136