Abstract
Behavior of cold-rolled fcc Ni88.4Cr9.2W2.4 alloy during heating has been studied. Two consecutive exothermic processes were detected using differential scanning calorimetry, high-temperature X-ray diffraction, and dilatometry. The processes were identified as polygonization and recrystallization, which lead to cube texture formation, as was shown by X-ray diffraction and electron backscatter diffraction. The heat effects of these processes were determined.
This is a preview of subscription content, access via your institution.
References
A. Goyal, J. D. Budai, D. M. Kroeger, D. P. Norton, E. D. Specht, and D. K. Christen, US Patent 5741377, 1998.
D. Larbalestier, A. Gurevich, D. M. Feldmann, and A. Polyanskii, “High-Tc superconducting materials for electric power applications,” Nature 414, 368–377 (2001).
A. Goyal, D. P. Norton, J. D. Budai, M. Paranthaman, E. D. Specht, D. M. Kroeger, D. K. Christen, Q. He, B. Saffian, F. A. List, D. F. Lee, P. M. Martin, C. E. Klabunde, E. Hartfield, and V. K. Sikka, “High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals,” Appl. Phys. Lett. 69, 1795–1797 (1996).
H. Hilgenkamp and J. Mannhart, “Grain boundaries in high-Tc superconductors,” Rev. Mod. Phys. 74, 485–549 (2002).
D. P. Rodionov, I. V. Gervas’eva, Yu. V. Khlebnikova, V. A. Sazonova, and B. K. Sokolov, “Effect of alloying and heat treatment on the formation of recrystallization cube texture in nickel alloys,” Phys. Met. Metallogr. 99, 80–89 (2005).
J. Eickemeyer, D. Selbmann, R. Opitz, H. Wendrock, E. Maher, U. Miller, and W. Prusseit, “Highly cube textured Ni-W-RABiTS tapes for YBCO coated conductors,” Physica A 372–376, 814–817 (2002).
P. P. Bhattacharjee, R. K. Ray, and A. Upadhyaya, “Nickel Base Substrate Tapes for Coated Superconductor Applications,” J. Mater. Sci. 42, 1984–2001 (2007).
L. H. van Vleck, Elements of Materials Science and Engineering (Addison-Wesley, Reading, Mass., 1970; Atomizdat, Moscow, 1975).
A. Tuissi, E. Villa, M. Zamboni, J. E. Evetts, and R. I. Tomov, “Biaxially textured NiCrX(X= W and V) tapes as substrates for HTS coated conductor applications,” Physica C 372–376, 759–762 (2002).
D. P. Rodionov, G. A. Dosovitskii, A. R. Kaul’, I. V. Gervas’eva, Yu. N. Akshentsev, V. A. Kazantsev, Yu. V. Khlebnikova, V. A. Sazonova, N. I. Vinogradova, S. V. Samoilenkov, S. N. Mudretsova, and A. V. Garshev, “Investigation of the structure and magnetic and mechanical properties of textured substrates of an Ni-Cr-W alloy,” Phys. Met. Metallogr. 109, 632–642 (2010).
U. Gaitzsch, J. Eickemeyer, Ch. Rodig, J. Freudenberger, B. Holzapfel, and L. Schultz, “Paramagnetic substrates for thin film superconductors: Ni-W and Ni-W-Cr,” Scr. Mater. 62, 512–515 (2010).
R. Nast, B. Obst, S. I. Schlachter, and W. Goldacker, “Development of cube-textured Ni and Ni alloy substrate tapes for coated conductors,” Proc. Materials Week-2002 (München, 2002).
I. V. Gervas’eva, D. P. Rodionov, B. K. Sokolov, Yu. V. Khlebnikova, and D. V. Dolgikh, “Evolution of nickel texture upon rolling and annealing: Production of sharp cubic texture,” Phys. Met. Metallogr. 90, 295–301 (2000).
S. S. Gorelik, S. V. Dobatkin, and L. M. Kaputkina, Recrystallization of Metals and Alloys (Mosk. Inst. Stali i Splavov, Moscow, 2005) [in Russian].
H. F. Ferguson, D. J. Frurip, A. J. Pastor, L. M. Peerey, and L. F. Whiting, “A review of analytical applications of calorimetry,” Thermochim. Acta 363, 1–21 (2000).
T. Knudsen, W. Q. Cao, A. Godfrey, Q. Liu, and N. Hansen, “Stored energy in nickel cold rolled to large strains, measured by calorimetry and evaluated from the microstructure,” Metall. Mater. Trans. A 39, 430–440 (2008).
H. Chang and I. Baker, “Effects of degree of deformation and deformation temperature on primary recrystallization textures in polycrystalline nickel,” Metall. Mater. Trans. A 38, 2815–2824 (2007).
R. Nast, B. Obst, and W. Goldacker, “Cube-textured nickel and Ni alloy substrates for YBCO coated conductors,” Physica A 372–376, 733–737 (2002).
G. A. Dosovitskiy, S. V. Samoilenkov, A. R. Kaul, and D. P. Rodionov, “Thermal expansion of Ni-W, Ni-Cr, and Ni-Cr-W alloys between room temperature and 800°C,” Int. J. Thermophys. 30, 1931–1937 (2009).
F. D. Richardson and J. H. E. Jeffes, “The thermodynamics of substances of interest in iron and steel making from 0°C to 2400°C: I-oxides,” J. Iron Steel Inst. London 160, 261–273 (1948).
A. V. Blednov, O. Yu. Gorbenko, D. P. Rodionov, and A. R. Kaul, “Revealing the mechanism of the early stages of Ni-W RABiTS oxidation,” J. Mater. Res. 25, 2362–2370 (2010).
D. V. Ignatov and R. D. Shamgunova, On the Mechanism of Oxidation of Nickel- and Chromium-Based Alloys (Akad. Nauk SSSR, Moscow, 1960) [in Russian].
G. Benchabane, Z. Boumerzoug, I. Thibon, and T. Gloriant, “Recrystallization of pure copper investigated by calorimetry and microhardness,” Mater. Charact. 59, 1425–1428 (2008).
S. G. Chowdhury, A. K. Jena, and R. K. Ray, “Recovery and ordering in cold-rolled boron-doped Ni 76 Al24,” Metall. Mater. Trans. A 31, 2127–2134 (2000).
Shestak, Y., Thermophysical Properties of Solids: Their Measurements and Theoretical Thermal Analysis (Academia, Prague, 1984; Mir, Moscow, 1987).
K. H. Schonborn and F. Haessner, “Kinetics of nucleation and growth reactions investigated by differential scanning calorimetry,” Thermochim. Acta 86, 305–320 (1985).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.A. Dosovitskiy, S.N. Mudretsova, A.V. Garshev, V.A. Amelichev, S.V. Samoilenkov, I.V. Gervasieva, Yu.V. Khlebnikova, D.P. Rodionov, A.R. Kaul, 2014, published in Fizika Metallov i Metallovedenie, 2014, Vol. 115, No. 1, pp. 32–41.
The article was translated by the authors.
Rights and permissions
About this article
Cite this article
Dosovitskiy, G.A., Mudretsova, S.N., Garshev, A.V. et al. Processes leading to formation of cube texture in cold-rolled Ni-Cr-W alloy. Phys. Metals Metallogr. 115, 30–38 (2014). https://doi.org/10.1134/S0031918X14010049
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X14010049
Keywords
- Nickel alloy
- deformation by rolling
- differential scanning calorimetry
- recrystallization
- texture