Abstract
In this study, the Rayleigh–Ritz method is used to analyse the vibration of a point-supported rectangular plate with a concentrated mass. The deformation and the first-order natural frequency under various working conditions are calculated. The results are compared with those obtained by the finite element method.
Similar content being viewed by others
REFERENCES
J. R. Banerjee, S. O. Papkov, X. Liu, and D. Kennedy, “Dynamic Stiffness Matrix of a Rectangular Plate for the General Case," J. Sound Vibrat. 342, 177–199 (2015).
W. L. Li, X. F. Zhang, J. T. Du, and Z. G. Liu, “An Exact Series Solution for the Transverse Vibration of Rectangular Plates with General Elastic Boundary Supports," J. Sound Vibrat. 321, 254–269 (2009).
J. Zhan, S. Ullah, and Y. Zhong, “Accurate Free Vibration Solutions of Orthotropic Rectangular thin Plates by Straightforward Finite Integral Transform Method," Arch. Appl. Mech. 90, 353–368 (2020).
Z. Zhong, A. Liu, and J. Deng, “Analytical and Experimental Studies on Dynamic Instability of Simply Supported Rectangular Plates with Arbitrary Concentrated Masses," Engng Structures 196, 109288 (2019).
S. Abrate, “Vibration of Point-Supported Rectangular Composite Plates," Composites Sci. Technol. 53 (3), 325–332 (1995).
M. A. Gharaibeh, A. M. Obeidat, and M. H. Obaidat, “Numerical Investigation of the Free Vibration of Partially Clamped Rectangular Plates," Intern. J. Appl. Mech. Engng. 23 (2), 385–400 (2018).
R. Kirisik and S. Yueksel, “Free Vibration Analysis of a Rectangular Plate with Kelvin Type Boundary Conditions," Shock Vibrat. 14 (6), 447–457 (2013).
M. A. Gharaibeh and A. M. Obeidat, “Vibrations Analysis of Rectangular Plates with Clamped Corners," Open Engng. 8 (1), 275–283 (2018).
H. Zhang, Y. P. Zhang, and C. M. Wang, “Hencky Bar-Net Model for Vibration of Rectangular Plates with Mixed Boundary Conditions and Point Supports," Intern. J. Structur. Stability Dynamics 18 (3), 1850046 (2018).
D. J. Gorman, “Accurate Free Vibration Analysis of Point Supported Mindlin Plates by the Superposition Method," J. Sound Vibrat. 219 (2), 265–277 (1999).
Y. H. Bian and C. Zhang, “The Stability Analysis of a Rectangular Plate Supported at Points of the Corners," MATEC Web Conf. 44, 02053 (2016).
J. Du, Z. G. Liu, W. Li, et al., “Free in-Plane Vibration Analysis of Rectangular Plates with Elastically Point-Supported Edges," J. Vibrat. Acoust. 132 (3), 1015–1016 (2015).
A. Cetkin and S. Orak, “The Free Vibration Analysis of Point Supported Rectangular Plates using Quadrature Element Method," J. Theor. Appl. Mech. 55 (3), 1041–1053 (2017).
M. Batista, “New Analytical Solution for Bending Problem of Uniformly Loaded Rectangular Plate Supported on Corner Points," IES J. Pt A: Civil Structur. Engng. 2 (3), 75–84 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 63, No. 4, pp. 156-163. https://doi.org/10.15372/PMTF20220416.
Rights and permissions
About this article
Cite this article
Wu, T., Chen, Z. & Qu, J. ANALYSIS OF LATERAL VIBRATION OF A RECTANGULAR PLATE SUPPORTED AT FOUR CORNER POINTS WITH AN ADDITIONAL CONCENTRATED MASS BASED ON THE RAYLEIGH–RITZ METHOD. J Appl Mech Tech Phy 63, 688–694 (2022). https://doi.org/10.1134/S0021894422040162
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894422040162