Abstract
Exact and approximate analytical solutions are compared with experimental data on the geometrically nonlinear bending of a thin elastic cantilever beam under the action of a transverse concentrated load at its free end.
Similar content being viewed by others
REFERENCES
A. S. Volmir, Stability of Deformable Systems (Defense Technical Information Center, 1970).
Yu. V. Zakharov and K. G. Okhotkin, “Nonlinear Bending of thin Elastic Rods," Prikl. Mekh. Tekh. Fiz. 43 (5), 124–131 (2002) [J. Appl. Mech. Tech. Phys. 43 (5), 739–744 (2002)].
G. M. Scarpello and D. Ritelli, “Exact Solutions of Nonlinear Equation of Rod Deflections Involving the Lauricella Hypergeometric Functions," Intern. J. Math. Math. Sci. 2011, 838924 (2011); DOI: 10.1155/2011/838924.
G. S. Vardanyan, V. I. Andreev, N. M. Atarov, and A. A. Gorshkov, Strength of Materials with the Basics of the Theory of Elasticity and Plasticity (Izv. ASV, Moscow, 1995) [in Russian].
N. S. Astapov, “Approximate Formulas for Deflection of Compressed Flexible Bars," Prikl. Mekh. Tekh. Fiz. 37 (4), 135–138 (1996) [J. Appl. Mech. Tech. Phys. 37 (4), 573–576 (1996)].
Yu. V. Zakharov, K. G. Okhotkin, and A. Yu. Vlasov, “Approximate Formulas for Sagging Deflection of an Elastic Rod under Transverse Loading," Prikl. Mekh. Tekh. Fiz. 43 (5), 132–134 (2002) [J. Appl. Mech. Tech. Phys. 43 (5), 745–747 (2002)].
M. H. J. Ang, W. Wei, and L. Teck-Seng, “On the Estimation of the Large Deflection of a Cantilever Beam," in Proc. of IECON’93 – 19th Annual Conf. of IEEE Industrial Electronics, Maui (USA), 1993, Vol. 3.
H. H. Denman and R. Schmidt, “An Approximate Method of Analysis of Large Deflections," Z. angew. Math. Phys. 21, 412–421 (1970).
D. M. Zuev and K. G. Okhotkin, “Modified Expressions for the Boom Deflection of the Console in the Case of a Transverse Load," Kosmicheskie Apparaty i Tekhnologii 4 (1), 28–35 (2020).
K. Gaurav, S. Bhaduri, and A. Kumar, “Prediction of Deflection of Cantilever Beam of Any Arbitrary Length Using Soft Computation," Intern. J. Res. Appl. Sci. Engng Technol. 4 (3), 448–454 (2016).
F. M. Morsch, N. Tolou, and J. L. Herder, “Comparison of Methods for Large Deflection Analysis of a Cantilever Beam Under Free End Point Load Cases," in Proc. of the ASME Design Engineering Technical Conf., San Diego (USA), 2009.
T. Beléndez, C. Neipp, and A. Beléndez, “Numerical and Experimental Analysis of a Cantilever Beam: A Laboratory Project to Introduce Geometric Nonlinearity in Mechanics of Materials," Intern. J. Engng Educat. 19 (6), 885–892 (2003).
B. D. Annin, A. Yu. Vlasov, Yu. V. Zakharov, and K. G. Okhotkin, “Study of Static and Dynamic Stability of Flexible Rods in a Geometrically Nonlinear Statement," Izvestiya Rossiskoi Akademii Nauk. Mekhanika Tverdogo Tela, No. 4, 6–18 (2017) [Mech. Solids. 52, 353–363 (2017)].
S. Timoshenko and J. M. Gere, Mechanics of Materials (Van Nostrand Reinhold Company, 1972).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 63, No. 2, pp. 217-224. https://doi.org/10.15372/PMTF20220221.
Rights and permissions
About this article
Cite this article
Zuev, D.M., Makarov, D.D. & Okhotkin, K.G. EXPERIMENTAL AND ANALYTICAL STUDY OF GEOMETRIC NONLINEAR BENDING OF A CANTILEVER BEAM UNDER A TRANSVERSE LOAD. J Appl Mech Tech Phy 63, 365–371 (2022). https://doi.org/10.1134/S0021894422020213
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894422020213