Abstract
A mathematical model was developed to calculate the relaxation of residual stresses in a surface-hardened prismatic sample subjected to biaxial loading under creep conditions. The calculation results were validated against experimental data for a surface-hardened sample of EP742 alloy after ultrasonic hardening under creep conditions at a temperature of 650 °C for 100 h. A detailed theoretical analysis was performed to investigate the effect of the type of stress state on residual stress relaxation under thermal exposure (temperature exposure in the absence of mechanical stress) and under biaxial loading at a constant intensity of external stresses. The results of the study show that in a plane stress state under uniform tension, there is a slowdown of residual stress relaxation, and under compression, there is an increase in the relaxation rate compared to the case of thermal exposure.
Similar content being viewed by others
REFERENCES
I. A. Birger, Residual Stresses (Mashinostroenie, Moscow, 1963) [in Russian].
A. M. Sulima, V. A. Shulov, and Yu. D. Yagodkin, Surface Layer and Performance Properties of Machine Parts (Mashinostroenie, Moscow, 1988) [in Russian].
I. V. Kudryavtsev, Surface Work Hardening to Increase the Strength and Durability of Machine Parts by Surface Plastic Deformation (Mashinostroenie, Moscow, 1969) [in Russian].
K. A. Soady, “Life Assessment Methodologies Incorporating Shot Peening Process Effects: Mechanistic Consideration of Residual Stresses and Strain Hardening. Pt 1. Effect of Shot Peening on Fatigue Resistance," Materials Sci. Technol. 29 (6), 637–651 (2013).
M. A. Terres, N. Laalai, and H. Sidhom, “Effect of Nitriding and Shot-Peening on the Fatigue Behavior of 42CrMo4 Steel: Experimental Analysis and Predictive Approach," Materials Design. 35, 741–748 (2012).
V. F. Pavlov, V. A. Kirpichev, and V. S. Vakulyuk, Predicting the Fatigue Resistance of Surface-Hardened Parts from Residual Stresses (Samara Research Center, Russian Academy of Sciences, Samara, 2012) [in Russian].
V. F. Pavlov, A. S. Bukatyi, and O. Yu. Semenova, “Prediction of the Endurance Limit of Surface-Hardened Parts with Stress Concentrators," Vestn. Mashinostroeniya, No. 1, 3–7 (2019).
V. P. Sazanov, V. A. Kirpichev, V. S. Vakulyuk, and V. F. Pavlov, “Determination of Initial Strains in a Hardened Layer of a Cylindrical Part by Finite Element Modeling Using PATRAN/NASTRAN Software," Vestn. Ufim. Gos. Aviats. Tekhn. Univ. 19 (2), 35–40 (2015).
V. P. Radchenko, O. S. Afanasyeva, and V. E. Glebov, “Effect of Residual Stresses on Geometric Parameters of a Surface-Hardened Beam," Izv. Sarat. Univ. Nov. Ser.: Matematika. Mekhanika. Informatika 19 (4), 464–478 (2019).
V. P. Radchenko and M. N. Saushkin, Creep and Relaxation of Residual Stresses in Hardened Structures (Mashinostroenie, Moscow, 2005).
V. P. Radchenko, V. F. Pavlov, and M. N. Saushkin “Mathematical Modeling of the Stress-Strain State in Surface-Hardened Bushings Taking into Account Residual Shear Stresses," Vestn. Perm. Nats. Issled. Politekhn. Univ. Mekhanika, No. 1, 138–150 (2019).
M. Jebahi, A. Gakwaya, J. Lévesque, et al., “Robust Methodology to Simulate Real Shot Peening Process Using Discrete-Continuum Coupling Method," Intern. J. Mech. Sci. 107, 21–33 (2016).
D. Gallitelli, V. Boyer, M. Gelineau, et al., “Simulation of Shot Peening: From Process Parameters to Residual Stress Fields in a Structure," Comptes Rendus Mechanique 344 (4/5), 355–374 (2016).
V. P. Radchenko and M. N. Saushkin, “Direct Method of Solving the Boundary-Value Problem of Relaxation of Residual Stresses in a Hardened Cylindrical Specimen under Creep Conditions," Prikl. Mekh. Tekh. Fiz. 50 (6), 90–99 (2009) [J. Appl. Mech. Tech. Phys. 50 (6), 989–997 (2009); https://doi.org/10.1007/s10808-009-0133-8].
V. P. Radchenko, E. P. Kocherov, M. N. Saushkin, and V. A. Smyslov, “Experimental and Theoretical Studies of the Influence of a Tensile Load on the Relaxation of Residual Stresses in a Hardened Cylindrical Specimen under Creep Conditions," Prikl. Mekh. Tekh. Fiz. 56 (2), 169–177 (2015) [J. Appl. Mech. Tech. Phys. 56 (2), 313–320 (2015); https://doi.org/10.1134/S0021894415020170].
V. P. Radchenko, V. V. Tsvetkov, and E. E. Derevyanka, “Relaxation of Residual Stresses in a Surface-Hardened Cylinder under Creep Conditions and Rigid Restrictions on Linear and Angular Deformations," Mech. Solids 55 (6), 898–906 (2020).
V. P. Radchenko, T. I. Bochkova, and V. V. Tsvetkov, “Relaxation of Residual Stresses in Surface-Hardened Half-Space under Creep Conditions," Vestn. Sam. Gos. Univ. Ser. Fiz.-Mat. Nauki 19 (3), 504–522 (2015).
V. P. Radchenko, M. N. Saushkin, and T. I. Bochkova “Mathematical Modeling of the Formation and Relaxation of Residual Stresses in Plane Samples of EP742 Alloy after Ultrasonic Hardening under High-Temperature Creep Conditions," Vestn. Perm. Nats. Issled. Politekhn. Univ. Mekhanika, No. 1, 93–112 (2016).
V. P. Radchenko and Yu. A. Eremin, Rheological Deformation and Fracture of Materials and Structural Elements (Mashinstroenie-1, Moscow, 2004) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 62, No. 5, pp. 184-194. https://doi.org/10.15372/PMTF20210518.
Rights and permissions
About this article
Cite this article
Radchenko, V.P., Berbasova, T.I. & Shishkin, D.M. RELAXATION OF RESIDUAL STRESSES IN A SURFACE-HARDENED PRISMATIC SAMPLE SUBJECTED TO BIAXIAL LOADING UNDER CREEP CONDITIONS. J Appl Mech Tech Phy 62, 861–869 (2021). https://doi.org/10.1134/S0021894421050187
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894421050187