Abstract
A stress-strain state arising under dynamic tension of a homogeneous rod made of an incompressible perfectly rigid-plastic material that satisfies the Mises—Hencky criterion is investigated. The possibility of thickening or thinning of the rod along its length is taken into account in an axisymmetric formulation, which makes it possible to simulate the formation and development of a neck. Three dimensionless time functions are introduced, one of which is a small geometric parameter, namely the ratio of an average radius to half the rod length. The ratios of the orders of smallness of the other two dimensionless functions to the small geometric parameter determine the influence of inertial terms in equations of motion on the stress and strain rate distribution. These ratios may vary at different time intervals, which determines one or another dynamic tension regimes. Two such characteristic regimes are revealed: one of them depends on a velocity at which the end sections move away from each other, and the other one depends on their acceleration. For the second regime, an asymptotic integration based analysis makes it possible to find the stress-strain state parameters, in which case this state is an “inertial correction" with respect to a quasistatic state in the rod with a cylindrical lateral surface.
Similar content being viewed by others
REFERENCES
A. A. Il’yushin, Modeling of Dynamic Processes in Solids and Engineering Applications (Fizmatlit, Moscow, 2009) [in Russian].
A. Yu. Ishlinskii and D. D. Ivlev, Mathematical Theory of Plasticity (Fizmatlit, Moscow, 2001) [in Russian].
B. D. Annin, V. O. Bytev, and S. I. Senashov, Group Properties of Elasticity and Plasticity Equations (Nauka. Sib. Otd., Novosibirsk, 1985) [in Russian].
G. I. Bykovtsev, “Compression of a Plastic Layer by Rigid Rough Plates with Account for the Forces of Inertia," Izv. Akad. Nauk SSSR. Otd. Tekh. Nauk. Mekhanika i Mashinostroenie, No. 6, 140–142 (1960).
S. S. Grigoryan, “Basic Concepts of Ground Dynamics," Prikl. Matematika i Mekhanika 24 (6), 1057–1072 (1960).
M. A. Zadoyan, Spatial Problems of Plasticity (Nauka, Moscow, 1992) [in Russian].
E. Nayar, “Some Plane Inertial Flows of Plastic Materials," in Continuum Mechanics (Izd. Bolgar. Akad. Nauk, Sofia, 1968) [in Russia].
I. A. Kiiko and V. A. Kadymov, “Generalization of the Prandtl Problem on the Compression of a Band," Vestnik Moskovskogo Universiteta. Seriya 1. Matematika, Mekhanika, No. 4, 50-56 (2003).
V. G. Bazhenov, S. L. Osetrov, and D. L. Osetrov, “Analysis of Stretching of Elastoplastic Samples and Necking with Edge Effects," Prikl. Mekh. Tekh. Fiz. 59 (4), 133–140 (2018) [Journal of Applied Mechanics and Technical Physics 59 (4), 693–698 (2018)].
V. V. Glagolev, L. V. Glagolev, and A. A. Markin, “Finite Deformation of a Panel in Ideal Plasticity and Superplasticity," Prikl. Mekh. Tekh. Fiz. 60 (6), 192–201 (2018) [Journal of Applied Mechanics and Technical Physics 60 (6), 693–698 (2018).
V. D. Georgievskii, Selected Problems of Solid Medium Mechanics (Lenand, Moscow, 2018) [in Russian].
D. V. Georgievskii, W. H. Müller, and B. E. Abali, “Thin-Layer Inertial Effects in Plasticity and Dynamics in the Prandtl Problem," Z. angew. Math. Mech. 99 (12), 1–11 (2019).
A. L. Gol’denveizer, “Constructing the Approximate Theory of Plate Bending via Asymptotic Integration of Equations of the Theory of Elasticity," Prikl. Matematika I Mekhanika 26 (4), 668–686 (1962).
D. V. Georgievskii, “Asymptotic Analysis of Plastic Flow along the Generatrix in a Thin Cylindrical Layer," Prikl. Mekh. Tekh. Fiz. 51 (5), 111–119 (2010) [Journal of Applied Mechanics and Technical Physics 51 (5), 713–720 (2010)].
V. F. Kravchenko, G. A. Nesenenko, and V. I. Pustovoit, Poincare Asymptotics of Solutions to Problems of Irregular Heat and Mass Transfer (Fizmatlit, Moscow, 2006) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 62, No. 5, pp. 119-130. https://doi.org/10.15372/PMTF20210513.
Rights and permissions
About this article
Cite this article
Georgievskii, D.V. DYNAMIC REGIMES FOR TENSION OF A ROD MADE OF AN PERFECTLY RIGID-PLASTIC MATERIAL. J Appl Mech Tech Phy 62, 806–815 (2021). https://doi.org/10.1134/S0021894421050138
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894421050138