Abstract
Models of poroelasticity and discrete fractures serve as a basis for a numerical study of a fluid flow in deformable fractured porous media. The influence of the stress-strain state of a medium on its flow properties is considered. Oil displacement from fractured formations is investigated. It is shown that compressive stresses have a significant impact on the efficiency of oil displacement. Calculations are carried out for three variants of randomly generated systems of fractures with different degrees of connectivity.
Similar content being viewed by others
REFERENCES
P. Pan, Z. Wu, X. Feng, and F. Yan, “Geomechanical Modeling of CO2 Geological Storage: A Review," J. Rock Mech. Geotech. Engng. 8 (6), 936–947 (2016).
I. Tomac and M. Sauter, “A Review on Challenges in Estimating the Geomechanical Rock Performance for Deep Geothermal Reservoir Development," Renewable Sustainable Energy Rev. 82, 3972–3980 (2018).
J. Rutqvist and O. Stephansson, “The Role of Hydromechanical Connectivity in Fractured Rock Engineering," Hydrogeology J. 11 (1), 7–40 (2003).
M. A. Biot, “General Theory of Three-Dimensional Consolidation," J. Appl. Phys. 12 (2), 155–164 (1941).
O. Coussy, Poromechanics (John Wiley and Sons, Chichester, 2004).
E. Bonnet, O. Bour, N. E. Odling, et al., “Scaling of Fracture Systems in Geological Media," Rev. Geophys. 39 (3), 347–383 (2001).
M. Karimi-Fard, L. Durlofsky, and K. Aziz, “An Efficient Discrete-Fracture Model Applicable for General Purpose Reservoir Simulators," SPE J. 9, 227–236 (2004).
T. T. Garipov, M. Karimi-Fard, and H. A. Tchelepi, “Discrete Fracture Model for Coupled Flow and Geomechanics," Comput. Geosci. 20 (1), 149–160 (2016).
A. A. Pyatkov and V. P. Kosyakov, “Steady and Unsteady Waterflooding of Fractured Porous Reservoirs," Vestnik Tyumenskogo Gosudarstvennogo Universiteta. Fiziko-Matematicheskoe Modelirovanie. Neft’, Gaz, Energetika 4 (3), 90–102 (2018).
A. A. Pyatkov, V. P. Kosyakov, S. P. Rodionov, and A. Y. Botalov, “Numerical Research of Two-Phase Flow in Fractured-Porous Media Based on Discrete Fracture Fetwork Model," AIP Conf. Proc. 1939, 020039 (2018).
M. Bai, “On Equivalence of Dual-Porosity Poroelastic Parameters," J. Geophys. Res.: Solid Earth. 104 (B5), 10461–10466 (1999).
P. A. Witherspoon, J. S. Y. Wang, K. Iwai, and J. E. Gale, “Validity of Cubic Law for Fluid Flow in a Deformable Rock Fracture," Water Resources Res. 16 (6), 1016–1024 (1980).
V. Martin, J. Jaffre, and J. Roberts, “Modeling Fractures and Barriers as Interfaces for Flow in Porous Media," SIAM J. Sci. Comput. 26 (5), 1667–1691 (2005).
T. Tang, O. Hededal, and P. Cardiff, “On Finite Volume Method Implementation of Poro-Elasto-Plasticity Soil Model," Intern. J. Numer. Analyt. Methods Geomech. 39 (13), 1410–1430 (2015).
J. Kim, H. A. Tchelepi, and R. Juanes, “Stability and Convergence of Sequential Methods for Coupled Flow and Geomechanics: Fixed-Stress and Fixed-Strain Splits," Comput. Methods Appl. Mech. Engng. 200 (13), 1591–1606 (2011).
R. D. Kanevskaya, Mathematical Modeling of Hydrodynamic Processes of Hydrocarbon Deposit Development (Izhevsk, 2002) [in Russian].
Z. Chen, G. Huan, and Y. Ma, Computational Methods for Multiphase Flows in Porous Media (Soc. Indust. Appl. Math., Philadelphia, 2006).
D. Y. Legostaev, A. Y. Botalov, and S. P. Rodionov, “Numerical Simulation of Fluid Flow in a Saturated Fractured Porous Media Based on the Linear Poroelasticity Model," J. Phys.: Conf. Ser. 1404, 012028 (2019).
O. Bour and P. Davy, “Connectivity of Random Fault Networks Following a Power Law Fault Length Distribution," Water Resources Res. 33 (7), 1567–1583 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 62, No. 3, pp. 126-136. https://doi.org/10.15372/PMTF20210312.
Rights and permissions
About this article
Cite this article
Legostaev, D.Y., Rodionov, S.P. NUMERICAL STUDY OF A TWO-PHASE FLUID FLOW IN A FRACTURED POROUS MEDIUM BASED ON MODELS OF POROELASTICITY AND DISCRETE FRACTURES. J Appl Mech Tech Phy 62, 458–466 (2021). https://doi.org/10.1134/S0021894421030123
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894421030123