Abstract
A mathematical model for the stress-strain state of a plate with an inclined elliptical defect under biaxial loading is considered. Exact formulas for stresses in polar coordinates, displacements, principal stresses, maximum shear stress, and stress intensity in the case of a plane stress state of the plate were obtained by the Kolosov-Muskhelishvili method. Simulation results are compared with experimental data obtained by holographic interferometry.
Similar content being viewed by others
References
P. S. Theocaris and J. G. Michopoulos, “A Closed Form Solution of Slant Crack under Biaxial Loading,” Eng. Fract. Mech. 17(2), 97–123 (1983).
J. Eftis and N. Subramonian, “The Inclined Crack under Biaxial Load,” Eng. Fract. Mech. 10(1), 43–67 (1978).
N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity (Nauka, Moscow, 1966) [in Russian].
V. A. Vinokurov, “Using the Fracture Mechanics to Assess the Properties of Welded Joints,” Svar. Proiz., No. 5, 2–4 (1977).
A. A. Ostsemin and P. B. Utkin, “Stress State in the Vicinity of an Inclined Elliptical Defect and the Stress Intensity Factors for Biaxial Loading of a Plate,” Prikl. Mekh. Tekh. Fiz. 50(1), 118–127 (2009) [J. Appl. Mech. Tech Phys. 50 (1), 99–106 (2009)].
A. A. Ostsemin and P. B. Utkin, “Stress-Strain State and Stress Intensity Factor for a Crack-Like Defect,” Izv. Ross. Akad. Nauk, Mekh. Tverd. Tela, No. 2, 73–78 (2010).
A. A. Kaminskii, Brittle Fracture Near Slits (Inst. of Mechanics, Academy of Sciences of USSR, Kiev, 1982) [in Russian].
A. A. Kopel’man, Resistance of Welded Joints to Brittle Fracture (Mashinostroenie, Lening. Otd., Leningrad, 1978) [in Russian].
P. S. Theocaris and C. P. Spyropoulos, “Photoelastic Determination of Complex Stress Intensity Factors for Slant Cracks under Biaxial Loading with Higher-Order Term Effects,” Acta Mech., No. 48, 57–70 (1983).
A. Ya. Aleksandrov and M. H. Akhmetzyanov, Polarization Optical Methods for the Mechanics of Deformable Solids (Nauka, Moscow 1973) [in Russian].
A. A. Ostsemin, “Determination of the Stress State and Stress Intensity Factors in Structures with Crack-Like Defects by Holographic Interferometry,” Vestn. Mashinostr., No. 8, 21–28 (2009).
A. A. Ostsemin, “Determination of the Stressed State of Bodies with Defects Using Holographic Interferometry,” Probl. Prochn., No. 10, 77–81 (1982).
A. Ya. Krasovskii, Fragility of Metals at Low Temperatures (Naukova Dumka, Kiev, 1980) [in Russian].
G. S. Pisarenko and A. A. Lebedev, Deformation and Strength of Materials in a Complex Stress State (Naukova Dumka, Kiev, 1976) [in Russian].
A. A. Ostsemin and P. B. Utkin, “Calculation of Stress Concentration Coefficients for Internal Technological Defects,” Vestn. Mashinostr., No. 12, 14–17 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Ostsemin, P.B. Utkin.
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 53, No. 2, pp. 115–127, March–April, 2012.
Rights and permissions
About this article
Cite this article
Ostsemin, A.A., Utkin, P.B. Stress-strain state of an inclined elliptical defect in a plate under biaxial loading. J Appl Mech Tech Phy 53, 246–257 (2012). https://doi.org/10.1134/S0021894412020137
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894412020137