Abstract
The process of formation of a gas hydrate in a finite-length porous medium partially saturated with water, which is purged by a cold gas, is studied. The influence of the initial parameters of the porous medium and purging conditions on the evolution of hydrate saturation and temperature is examined.
Similar content being viewed by others
References
V. A. Istomin and V. S. Yakushev, Gas Hydrates in Nature [in Russian], Nedra, Moscow (1992).
S. Sh. Byk, Yu. F. Makogon, and V. I. Fomina, Gas Hydrates [in Russian], Khimiya, Moscow (1980).
P. Jadhawar, A. H. Mohammadi, J. Yang, and B. Tohidi, “Subsurface carbon dioxide storage through clathrate hydrate formation,” in: Advances in the Geological Storage of Carbon Dioxide, Springer, Amsterdam (2006), pp. 111–126.
O. R. Nurislamov and V. Sh. Shagapov, “Injection of a gas into a humid porous medium with formation of gas hydrates,” Prikl. Mat. Mekh., No. 5, 809–823 (2009).
V. Sh. Shagapov, N. G. Musakaev, and M. K. Khasanov, “Gas injection into porous reservoir saturated with gas and water,” Thermophys. Aeromech., 12, No. 4, 605–616 (2005).
G. I. Barenblatt, V. M. Entov, and V. M. Ryzhik, Motion of Liquids and Gases in Natural Beds [in Russian], Nedra, Moscow (1984).
V. I. Vasil’ev, V. V. Popov, and T. S. Timofeeva, Computational Methods in Development of Oil and Gas Deposits [in Russian], Izd. Sib. Otd. Ross. Akad. Nauk (2000).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 52, No. 4, pp. 116–126, July–August, 2011.
Rights and permissions
About this article
Cite this article
Shagapov, V.S., Khasanov, M.K., Gimaltdinov, I.K. et al. Numerical modeling of formation of a gas hydrate in a finite-length porous bed purged by a gas. J Appl Mech Tech Phy 52, 599–607 (2011). https://doi.org/10.1134/S0021894411040134
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894411040134