Abstract
The properties of nanostructured materials based on zinc and indium oxides can be modified by adding alloying elements to obtain the necessary electrical or optical properties. For example, the specificity of the chemical properties of ZnO and In2O3 for the determination of toxic gases is achieved by immobilizing Au, Ag, etc., nanoparticles on their surface. Control of the material composition plays an important role in determining the dependence between the dopant content and functional properties of the materials. The study is aimed at the development of a methodical approach to the multielement determination of catalytic dopants (Ag, Au) and matrix elements in nanostructured tin and indium oxides using the method of high resolution atomic absorption spectrometry with electrothermal atomization (ETAAS) and continuous spectral source. The matrix of the synthesized nanostructured materials is the corresponding oxide with possible oxygen deficiency due to the temperature conditions of the synthesis (300–700°C), and the content of additives (Ag, Au) is varied from 1 to 3 wt %. Optimal conditions of pyrolysis and atomization for sequential multielement analysis by the ETAAS method are determined. The optimal pyrolysis temperatures for determining Ag and Au (for both oxides), In, and Zn are 1000, 1600, 1200, and 900°C, respectively. The optimal atomization temperatures for determining Ag and Au (for nanomaterial based on indium oxide), Au (for nanomaterial based on zinc oxide), In, and Zn are 1800, 2200, 2100, 2200, and 1500°C, respectively. The accuracy of analyte determination reaches 1–4% (rel.). The correctness of the results is confirmed by inductively coupled plasma mass spectrometry. The developed method provides control of the composition of synthesized nanostructured materials for their more efficient use in photovoltaics, as well as in production of chemical sensors for detection of harmful compounds like CO, NO2, and NH3.
Similar content being viewed by others
REFERENCES
Sosnin, D.V., Kudryashov, D.A., Gudovskikh, S.A., and Zelentsov, K.S., Electrical and optical properties of nanosized films of doped zinc and indium oxides deposited by RF magnetron sputtering at room temperature, Tech. Phys. Lett., 2015, vol. 11, no. 8, pp. 804–806. https://doi.org/10.1134/S1063785015080325
Krivetskiy, V.V., Rumyantseva, M.N., and Gaskov, A.M., Chemical modification of nanocrystalline tin dioxide for selective gas sensors, Russ. Chem. Rev., 2013, vol. 82, no. 10, pp. 917–941. https://doi.org/10.1070/RC2013v082n10ABEH004366
Krivetskiy, V., Ponzoni, A., Comini, E., et al., Selectivity modification of SnO2-based materials for gas sensor arrays, Electroanalysis, 2010, vol. 22, no. 23, pp. 2809–2816. https://doi.org/10.1002/elan.201000277
Xu, L., Zhang, H., Tian, Y., et al., Photochemical synthesis of ZnOAu nanorods as an advanced reusable SERS substrate for ultrasensitive detection of light-resistant organic pollutant in wastewater, Talanta, 2019, vol. 194, pp. 680–688. https://doi.org/10.1016/j.talanta.2018.10.060
Vorobyeva, N., Rumyantseva, M., Filatova, D., et al., Highly sensitive ZnO(Ga, In) for sub-ppm level NO2 detection: effect of indium content, Chemosensors, 2017, vol. 5, no. 2, p. 18. https://doi.org/10.3390/chemosensors5020018
An, S., Park, S., Ko, H., et al., Enhanced ethanol sensing properties of multiple networked Au-doped In2O3 nanotube sensors, J. Phys. Chem. Solids, 2013, vol. 74, no. 7, pp. 979–984. https://doi.org/10.1016/j.jpcs.2013.02.016
Naberezhnyi, D., Rumyantseva, M., Filatova, D., et al., Effects of Ag additive in low temperature CO detection with In2O3 based gas sensors, Nanomaterials, 2018, vol. 8, no. 10, p. 801. https://doi.org/10.3390/nano8100801
Mishra, R.K., Zachariah, A.K., and Thomas, S., Energy-dispersive X-ray spectroscopy techniques for nanomaterial, in Microscopy Methods in Nanomaterials Characterization, Amsterdam: Elsevier, 2017, ch. 12, pp. 383–405. https://doi.org/10.1016/B978-0-323-46141-2.00012-2
Pathak, T.K., Kroon, R.E., and Swart, H.C., Photocatalytic and biological applications of Ag and Au doped ZnO nanomaterial synthesized by combustion, Vacuum, 2018, vol. 157, pp. 508–513. https://doi.org/10.1016/j.vacuum.2018.09.020
Filatova, D.G., Eskina, V.V., Barampvskaya, V.B., et al., Determination of gold and cobalt dopants in advanced materials based on tin oxide by slurry sampling high-resolution continuum source graphite furnace atomic absorption spectrometry, Spectrochim. Acta, Part B, 2018, vol. 140, pp. 1–4. https://doi.org/10.1016/j.sab.2017.12.003
Filatova, D.G., Alov, N.V., Vorobyeva, N.A., et al., Quantification of modifiers in advanced materials based on zinc oxide by total reflection X-ray fluorescence and inductively coupled plasma mass spectrometry, Spectrochim. Acta, Part B, 2016, vol. 118, pp. 62–65. https://doi.org/10.1016/j.sab.2016.02.008
Turkin, A.A., Chizhov, A.S., Seregina, I.F., et al., Determination of gold and antimony in advanced materials based on tin dioxide using inductively coupled plasma mass spectrometry, Inorg. Mater., 2015, vol. 51, no. 14, pp. 1420–1422. https://doi.org/10.1134/S0020168515140113
Tricoli, A., Graf, M., and Pratsinis, S.E., Optimal doping for enhanced SnO2 sensitivity and thermal stability, Adv. Funct. Mater., 2008, vol. 18, pp. 1969–1976. https://doi.org/10.1002/adfm.200700784
Mädler, L., Roessler, A., Pratsinis, S.E., et al., Direct formation of highly porous gas-sensing films by in situ thermophoretic deposition of flame-made Pt/SnO2 nanoparticles, Sens. Actuators, B 2006, vol. 114, no. 1, pp. 283–295. https://doi.org/10.1016/j.snb.2005.05.014
Krotova, A.A., Prikhodko, K.Ya., Vladimirova, S.A., and Filatova, D.G., Determination of nickel, zinc and cobalt in advanced materials based on NixCo3–xO4 and ZnxCo3–xO4 by inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence, Inorg. Mater., 2019, vol. 55, no. 14, pp. 1343–1346. https://doi.org/10.1134/S0020168519140097
Nomenclature, symbols, units and their usage in spectrochemical analysis. II. Data interpretation, Spectrochim. Acta, Part B, 1978, vol. 33, no. 6, pp. 241–245. https://doi.org/10.1016/0584-8547(78)80044-5
Currie, L.A., Nomenclature in evaluation of analytical methods including detection and quantification capabilities (IUPAC Recommendations 1995), Pure Appl. Chem., 1995, vol. 67, no. 10, pp. 1699–1723. https://doi.org/10.1351/pac199567101699
Mocak, J., Bond, A.M., Mitchell, S., and Scollarry, G., A statistical overview of standard (IUPAC and ACS) and new procedures for determining the limits of detection and quantification: application to voltammetric and stripping techniques (Technical Report), Pure Appl. Chem., 1997, vol. 69, no. 2, pp. 297–328. https://doi.org/10.1351/pac199769020297
ACKNOWLEDGMENTS
This work was carried out using the equipment of the Analytical and Certification Testing Center of the Giredmet Institute.
Funding
This paper was prepared with the support of the Russian Foundation for Basic Research (grant no. 17-03-01014).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by V. Alekseev
Rights and permissions
About this article
Cite this article
Eskina, V.V., Baranovskaya, V.B., Filatova, D.G. et al. Analysis of Nanomaterials Based on Indium and Zinc Oxides by High Resolution Atomic Absorption Spectrometry with the Use of Continuous Spectral Source and Electrothermal Atomization. Inorg Mater 56, 1391–1397 (2020). https://doi.org/10.1134/S0020168520140058
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168520140058