Abstract—
We have studied the effect of size factors of substrates on the formation of TiO2 layers with a well-developed acicular–fibrous structure on VT-20 titanium. The proposed technique allows a TiO2 layer with a large surface area to be produced by etching in a KOH solution (without using hydrothermal synthesis conditions), followed by heat treatment. The layers thus produced consist of fibers 20–100 nm in diameter and up to 1 μm in length, which are strongly bonded to the substrate surface. Their phase composition is dominated by rutile. The fiber growth process is shown to be influenced by substrate etching and heat treatment conditions, weakly influenced by the curvature of the substrate, and independent of its dimensions.
Similar content being viewed by others
REFERENCES
Zagorskii, V.A., Biocompatibility of implants and bone tissue, Aktual. Probl. Guman. Estestv. Nauk, 2016, vol. 2, no. 10, pp. 162–166.
Yumashev, A.V., Kristal’, E.A., Kuderova, I.G., and Mikhailova, M.V., Intolerance to orthopedic structures and galvanism effects, Zdorov’e Obraz. XXI Veke, 2012, vol. 14, no. 2, pp. 26–29.
Zhevtun, I.G. and Gordienko, P.S., RF Patent 2 600 294, 2016.
Hansson, S., RF Patent 2 615 418, 2012.
Skachkov, V.M., Borisov, S.V., Shirokova, A.G., Sabirzyanov, N.A., and Bogdanova, E.A., RF Patent 2 599 039, 2017.
Kolen’ko, Yu.V., Burukhin, A.A., Churagulov, B.R., Oleinikov, N.N., and Mukhanov, V.A., Hydrothermal synthesis of nanocrystalline powders of various crystalline phases of ZrO2 and TiO2, Russ. J. Inorg. Chem., 2002, vol. 47, no. 11, pp. 1609–1615.
Drobakha, G.S., Properties of nanostructured oxide coatings on titanium substrates, XII Rossiiskaya ezhegodnaya konferentsiya molodykh nauchnykh sotrudnikov i aspirantov “Fizikokhimiya i tekhnologiya neorganicheskikh materialov” (XII Annual All-Russia Conf. of Young Researchers and Postgraduates: Physical Chemistry and Technology of Inorganic Materials), Moscow: Inst. Metallurgii Ross. Akad. Nauk, 2015, pp. 424–425.
Drobakha, G.S., Drobakha, E.A., Chernyavskii, A.S., and Solntsev, K.A., RF Patent 2 502 526, 2013.
ACKNOWLEDGMENTS
This work was supported by the Russian Ministry of Science and Higher Education, state research target no. 007-00129-18-00.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Tsarev
Rights and permissions
About this article
Cite this article
Drobakha, E.A., Drobakha, G.S., Shevtsov, S.V. et al. Morphology of TiO2 Layers with a Well-Developed Acicular–Fibrous Structure in VT-20 Titanium. Inorg Mater 54, 1119–1123 (2018). https://doi.org/10.1134/S0020168518110055
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168518110055