Abstract
Numerical evaluation of the reliable measurement range of residual stresses by probe-hole method is obtained using the finite element method. It is demonstrated that recovery of the ratio of components of the stress state when using the approach based on basis functions is performed with accuracy sufficient for practical application. Precise recovery of values of the components of the stress state is possible with the effective intensity of residual stresses in the range of 0–0.7 of the tensile yield of the studied material.
Similar content being viewed by others
References
Birger, I.A., Ostatochnye napryazheniya (Residual Stresses), Moscow: Gos. Nauchno-Tekh. Izd. Mashinostr. Lit., 1963.
Kobayashi, A.S., Handbook on Experimental Mechanics, Seattle: Soc. Exp. Mech., 1993.
Antonov, A.A., Bobrik, A.I., Morozov, V.K., et al., Determination of residual stresses using the hole drilling and holographic interferometry, Mekh. Tverd. Tela, 1980, no. 2, pp. 41–43.
Chernyshov, G.N., Popov, A.L., Kozintsev, V.M., and Ponomareov, I.I., Ostatochnye napryazheniya v deformiruemykh tverdykh telakh (Residual Stresses in Deformed Solid Bodies), Moscow: Nauka, 1996.
Pisarev, V.S., Shchepinov, V.P., and Shchikanov, A.Yu., Using reflection hologram interferometers for determining residual stresses by the probe-hole method, Tech. Phys., 1996, vol. 66, no. 1, pp. 50–57.
Odintsev, I.N., Shchepinov, V.P., and Shchikanov, A.Yu., Holographic interferometry for measuring residual stresses by using probing holes, Tech. Phys., 2003, vol. 48, no. 11, pp. 1464–1467.
Steinzig, M. and Ponslet, E., Residual stress measurement using the hole drilling method and laser speckle interferometry, Exp. Tech., 2003, no. 5, pp. 43–46.
Viotti, M.R. and Kaufmann, G.H., Accuracy and sensitivity of a hole drilling and digital speckle pattern interferometry combined technique to measure residual stresses, Opt. Lasers Eng., 2004, vol. 41, no. 2, pp. 297–305.
Apalkov, A.A., Odintsev, I.N. and Razumovskii, I.A., The fringe pattern interpretation by the measuring of residual stresses using the electronic speckle interferometry, Zavod. Lab., Diagn. Mater., 2002, vol. 68, no. 5, pp. 39–41.
Apalkov, A.A., Odintsev, I.N. and Razumovskii, I.A., The measurement of residual stresses in massive structural elements using the electronic speckle interferometry, Zavod. Lab., Diagn. Mater., 2003, vol. 69, no. 2, pp. 45–49.
Razumovsky, I.A., Interference-Optical Methods of Solid Mechanics, Berlin: Springer-Verlag, 2011.
Anpilov, A.V., Kiselev, A.S., Kiselev, Al.S., Larkin, A.I., et al., Opredelenie ostatochnykh svarochnykh napryazhenii na osnove sovmestnogo ispol’zovaniya metodov golograficheskoi interferometrii i konechnykh elementov (Determination of Welding Residual Stresses Based on Holographic Interferometry and Finite Elements Method), Moscow: Nats. Issled. Yad. Univ., MIFI, 2007.
Release 14.0 Documentation for ANSYS, Canonsburg, PA: ANSYS, 2011.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Apal’kov, I.N. Odintsev, A.S. Plotnikov, 2016, published in Zavodskaya Laboratoriya, Diagnostika Materialov, 2016, Vol. 82, No. 2, pp. 47–52.
Rights and permissions
About this article
Cite this article
Apal’kov, A.A., Odintsev, I.N. & Plotnikov, A.S. Estimation of Range of Reliable Measurements of Residual Stresses by Hole Drilling Method. Inorg Mater 53, 1496–1501 (2017). https://doi.org/10.1134/S0020168517150031
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168517150031