Skip to main content
SpringerLink
Log in

Methodological basics of nondestructive testing, diagnostics, and monitoring of conditions for materials and engineering systems

  • Mechanics of Materials: Strength, Lifetime, and Safety
  • Published:
Inorganic Materials Aims and scope

Abstract

This article presents a review of safety validation, calculations of initial and residual life, reliability, and survivability of equipment critical structures based on analyzing stress-strain states following the results of diagnostics and monitoring of parameters of their current and limit states with consideration of accumulation of operational damageability. On the basis of the assessment of the stress-strain states and changes in properties of structural materials and their defectiveness, we studied the possibility of determining the consumed part of the lifespan, residual life, survivability, and reliability of critical elements in machines and structures. We proved that integrated implementation of control, nondestructive testing, defectometry, technical diagnostics, fracture diagnostics, and monitoring of critical equipment elements offers new opportunities of controlling the lifespan and safety of highly hazardous facilities.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Gosudarstvennyi doklad “O sostoyanii zashchity naseleniya i territorii ot chrezvychainykh situatsii prirodnogo i tekhnogennogo kharaktera v 2014 g.” (Governmental Report “On the Protection of Population and Territory against Natural and Industrial Accident Situations in 2014), Moscow: Minist. Chrezvychainykh Situats. Ross. Fed., 2015.

  2. Doklad Federal’noi sluzhby po ekologicheskomu, tekhnologicheskomu i atomnomu nadzoru “Ob osushchestvlenii gosudarstvennogo kontrolya (nadzora) v 2013 godu i ob effektivnosti takogo kontrolya (nadzora)” (The Report of the Federal Agency for Environmental, Process, and Nuclear Supervision “On State Supervision in 2013 and Its Efficiency”), Moscow: Rostekhnadzor, 2014.

  3. Makhutov, N.A. and Gadenin, M.M., Tekhnicheskaya diagnostika i monitoring riskov dlya oborudovaniya GES. Razrushenie gidroagregata № 2 Sayano-Shushenskoi GES: prichiny i uroki (Technical Diagnostics and Risk Monitoring for a Hydroelectric Power Plant. Fracture in Hydroelectric Unit No. 2 of the Sayano-Shushenskaya Dam: Reasons and Lessons), Moscow: RusGidro, 2013, vol. 1.

    Google Scholar 

  4. Bezopasnost’ Rossii. Pravovye, sotsial’no-ekonomicheskie i nauchno-tekhnicheskie aspekty (Safety of Russia: Legal, Social-Economic, and Engineering Aspects), Moscow: Znanie, 1998–2015, vols. 1–49.

  5. Grazhdankin, A.I. and Kara-Murza, S.G., Belaya kniga Rossii (The White Book of Russia), Moscow: Nauchnyi Ekspert, 2015.

    Google Scholar 

  6. Lebedeva, M.I., Bogdanov, A.V., and Kolesnikov, Yu.Yu., Analytical review of the statistics on the danger events on the oil refining and oil-chemical industry, Tekhnol. Tekhnosfernoi Bezop., 2013, no. 4 (50). http://academygps.ru/img/UNK/asit/ttb/2013-4/20-04-13.ttb.pdf.

    Google Scholar 

  7. Avariinost’ i travmatizm na ob”ektakh neftegazovogo kompleksa. Informatsionnyi byulleten’ Rostekhnadzora. Spetsvypusk (Accident and Injury Accident Rate at Oil and Gas Facilities. Informational Bulletin of Rosteknadzor), Moscow: Minist. Chrezvychainykh Situats. Ross. Fed., 2015, special issue.

  8. Makhutov, N.A., Prochnost’ i bezopasnost’: fundamental’nye i prikladnye issledovaniya (Strength and Safety: Fundamental and Applied Studies), Novosibirsk: Nauka, 2008.

    Google Scholar 

  9. Makhutov, N.A., Konstruktsionnaya prochnost’, resurs i tekhnogennaya bezopasnost’. Chast’ 1. Kriterii prochnosti i resursa (Structural Strength, Lifespan, and Industrial Safety, Part 1: Criteria of Strength and Lifespan), Novosibirsk: Nauka, 2005.

    Google Scholar 

  10. Gadenin, M.M., Multiparameteric analysis of conditions of safe operation and protection of machines and construction by criteria of strength, lifespan, and durability, Probl. Bezop. Chrezvychainykh Situats., 2012, no. 6, pp. 50–56.

    Google Scholar 

  11. Makhutov, N.A. and Gadenin, M.M., Nauchnoe obosnovanie promyshlennoi bezopasnosti na osnove kontseptsii riska: Federal’nyi spravochnik. Natsional’naya bezopasnost’ Rossii (Scientific Foundation of Industrial Safety on the Basis of Risk Concept: Federal Reference Book. National Safety of Russia), Moscow: Tsentr Strateg. Partner., 2014, vol. 1, pp. 323–332.

    Google Scholar 

  12. Makhutov, N.A. and Gadenin, M.M., Tekhnogennaya bezopasnost’: Diagnostika i monitoring sostoyaniya potentsial’no opasnogo oborudovaniya i riskov ego ekspluatatsii: Federal’nyi spravochnik. Informatsionno-analiticheskoe izdanie (Industrial Safety: Diagnostics and Monitoring of the Condition of Potentially Hazardous Equipment and Its Operation Risks: Federal Reference Book. Informational and Analytical Edition), Moscow: Tsentr Strateg. Partner., 2012, vol. 26, pp. 307–314.

    Google Scholar 

  13. Makhutov, N.A. and Gadenin, M.M., Kompleksnye raschetno-eksperimental’nye metody otsenki shtatnykh i predel’nykh sostoyanii vysokoriskovykh ob”ektov // Doklady Sessii Nauchnogo soveta RAN po avtomatizirovannym sistemam diagnostiki i ispytanii (Comprehensive Calculation-Based and Experimental Assessment of Routine and Limit States at Highly Hazardous Facilities // Session Reports of the Scientific Council of the Russian Academy of Science Regarding Automated Diagnostics and Testing Systems), Moscow: Spektr, 2014, pp. 34–57.

    Google Scholar 

  14. Gadenin, M.M., Characteristics of mechanical properties of materials in analysis of conditions for maximum states, Zavod. Lab., Diagn. Mater., 2012, vol. 78, no. 2, pp. 58–63.

    Google Scholar 

  15. Makhutov, N.A., Gadenin, M.M., Chernyavskii, A.O., and Shatov, M.M., Risk analysis of failures in operation of potentially dangerous objects, Probl. Anal. Riska, 2012, vol. 9, no. 3, pp. 8–21.

    Google Scholar 

  16. Makhutov, N.A., Akhmetkhanov, R.S., Gadenin, M.M., and Yudina, O.N., Organization of general structure and algorithms of complex analysis of protection of important objects, Probl. Bezop. Chrezvychainykh Situats., 2012, no. 2, pp. 31–50.

    Google Scholar 

  17. Gadenin, M.M., Assessment of the influence of load regimes on conditions for maximum permissible state and resources, Zavod. Lab., Diagn. Mater., 2013, vol. 79, no. 10, pp. 65–70.

    Google Scholar 

  18. Makhutov, N.A. and Gadenin, M.M., Tekhnicheskaya diagnostika ostatochnogo resursa i bezopasnosti: uchebnoe posobie (Technical Diagnostics in Terms of the Lifespan and Safety: Learning Aid), Klyuev, V.V., Ed., Moscow: Spektr, 2011.

  19. Makhutov, N.A. and Gadenin, M.M., Technical diagnostics of residual resources and safety of industrial facilities, in Doklady sessii Nauchnogo soveta Rossiiskoi Aakademii Nauk po avtomatizirovannym sistemam diagnostiki i ispytanii (The Report of Scientific Council of Russian Academy of Sciences on Computer Systems of Diagnostics and Tests), Moscow: Ross. Akad. Nauk, 2013, pp. 3–13.

    Google Scholar 

  20. Klyuev, V.V., Nerazrushayushchii kontrol’ i diagnostika: spravochnik (Non-Destructive Testing and Diagnostics: Handbook), Moscow: Mashinostroenie, 2003.

    Google Scholar 

  21. Gadenin, M.M., The structure of multilevel monitoring of parameters of technogenic safety and environment, Probl. Bezop. Chrezvychainykh Situats., 2012, no. 1, pp. 93–102.

    Google Scholar 

  22. Makhutov, N.A., Gadenin, M.M., and Taranov, R.A., Analysis of complex monitoring of potentially danger objects, Izv. Ross. Akad. Nauk, Ser. Geogr., 2010, no. 6, pp. 88–95.

    Google Scholar 

  23. Melone, G., Miodusheskii, P., Rizzi, L., and Vasanelli, L., Miniaturized thin film temperature sensor for wide range of measurement, 2nd Int. Workshop (IWASI) “Advances in Sensors and Interface,” Italy, June 26–27, 2007, Bari, Italy, 2007.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Blagonravov Institute of Engineering Science, Russian Academy of Sciences, Moscow, Russia

    N. A. Makhutov & M. M. Gadenin

  2. MP OTK Tekhnokomplekt, Moscow, Russia

    V. V. Ivanov & P. V. Miodushevskii

Authors
  1. N. A. Makhutov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. M. Gadenin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. V. Ivanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. P. V. Miodushevskii
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to N. A. Makhutov.

Additional information

Original Russian Text © N.A. Makhutov, M.M. Gadenin, V.V. Ivanov, P.V. Miodushevskii, 2015, published in Zavodskaya Laboratoriya, Diagnostika Materialov, 2015, Vol. 81, No. 10, pp. 47–56.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Makhutov, N.A., Gadenin, M.M., Ivanov, V.V. et al. Methodological basics of nondestructive testing, diagnostics, and monitoring of conditions for materials and engineering systems. Inorg Mater 52, 1532–1540 (2016). https://doi.org/10.1134/S0020168516150103

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0020168516150103

Keywords

Search

Navigation