Abstract
A method for assessment the durability of turbine disks at the stages of damage removing and development subject to structural and technological changes is developed on the basis of the nonlinear mechanics of deformation and fracture. The proposed method includes numerical analysis of the stressdeformed condition of disks in the initial and damaged states, determination of stress and strain fields in the zones of cutting of the damaged material volume, and calculation of low-cycle fatigue and the duration of crack growth from initial to critical sizes. The theory of the developed method is the concept of a fracture process zone. The method is used for comparative evaluation of stress-deformed conditions and durability parameters for options of changing the geometry of a steam turbine disk by removing the damaged material around slot fillet of key.
Similar content being viewed by others
References
Trubilov, M.A., Arsen’ev, G.V., Frolov, V.V., et al., Parovye i gazovye turbiny (Steam and Gas Turbines) University handbook, Kostyuk, A.G. and Frolov, V.V., Eds., Moscow: Energoatomizdat, 1985.
Trukhnii, A.D., and Losev, S.M. Stacionarnye parovye turbiny (Stationary Steam Turbines), Troyanskii, B.M., Ed., Moscow: Energoizdat, 1981.
Kostyuk, A.G., Dinamika i prochnost’ turbomashin (Dynamics and Strength of Turbomachinery), Moscow: Mashinostroenie, 1982.
Shlyannikov, V.N., Elastic-plastic Mixed Mode Fracture Criteria and Parameters, Berlin: Springer, 2003.
ANSYS. Theory Reference, 11th ed., SAS IP, Inc., 1999.
Zhiritskii, G.S., Constructsiya i raschet na prochnost’ detalei parovikh turbin (Design and Strength Analysis of Steam Turbines Parts), Moscow: Gosenergoizdat, 1955.
RD 34.30.507-92: Guidelines against Corrosion Damage of Disks and Blade Row of Steam Turbines in the Zone of Phase Transition, Moscow: VTI, 1992.
GOST (State Standard) 25859-83: Steel Vessels and Equipment. Norms and Methods of Strength Calculation in Low-Cycle Loads, Moscow: Izd. Standartov 1984.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Shlyannikov, R.R. Yarullin, 2009, published in Zavodskaya Laboratoriya. Diagnostika materialov, 2009, Vol. 75, No. 9, pp. 46–50.
Rights and permissions
About this article
Cite this article
Shlyannikov, V.N., Yarullin, R.R. Method for assessment of the residual life of turbine disks. Inorg Mater 46, 1683–1687 (2010). https://doi.org/10.1134/S0020168510150148
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168510150148