Skip to main content
Log in

Mechanochemical synthesis of amorphous and crystalline magnesium diboride

  • Published:
Inorganic Materials Aims and scope

Abstract

We have studied the phase composition of materials obtained by mechanochemical processing and subsequent heat treatment of mixtures of magnesium and boron powders in the atomic ratio 1: 2. Differential dissolution, differential scanning calorimetry, and X-ray diffraction data indicate that, during mechanical processing, some of the magnesium reacts with boron to form amorphous magnesium diboride. During annealing of the activated powder mixture, X-ray amorphous magnesium diboride forms at 340°C and crystallizes at 480°C. As shown by high-resolution transmission electron microscopy, the unreacted crystalline magnesium is covered with an amorphous layer consisting of magnesium diboride and boron. The amorphous material obtained by milling contains nuclei of MgB2 crystallites 3–5 nm in size. During subsequent heating of the activated mixture, magnesium and boron react further to form amorphous magnesium diboride and the amorphous phase crystallizes. Heating of mechanically activated mixtures to just below the crystallization temperature allow MgB2 nanoparticles to be produced. The formation of nanocrystalline magnesium diboride nuclei along with the amorphous phase during mechanochemical processing facilitates mechanochemical synthesis compared to thermal synthesis.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Radev, D.D., Marinov, M., Tumbalev, V., et al., Mechanically Activated Self-Propagated High-Temperature Synthesis of Nanometer-Structured MgB2, Phys. C (Amsterdam, Neth.), 2005, vol. 418, pp. 53–58.

    CAS  Google Scholar 

  2. Varin, R.A. and Chiu, Ch., Synthesis of Nanocrystalline Magnesium Diboride (MgB2) Metallic Superconductor by Mechano-Chemical Reaction and PostAnnealing, J. Alloys Compd., 2006, vol. 407, pp. 268–273.

    Article  CAS  Google Scholar 

  3. Gumbel, A., Eckert, J., Fuchs, G., et al., Improved Superconducting Properties in Nanocrystalline Bulk MgB2, Appl. Phys. Lett., 2002, vol. 80, no. 15, pp. 2725–2727.

    Article  CAS  Google Scholar 

  4. Abe, H., Natio, M., et al., Low Temperature Formation of Superconducting MgB2 Phase from Elements by Mechanical Alloying, Phys. C (Amsterdam, Neth.), 2003, vol. 391, pp. 211–216.

    CAS  Google Scholar 

  5. Gao, Y.D., Ding, J., Rao, G.V.S., et al., Superconductivity of MgB2 after Mechanical Milling, Phys. Status Solidi, 2002, vol. 191, no. 2, pp. 548–554.

    Article  CAS  Google Scholar 

  6. Gao, Y.D., Ding, J., Rao, G.V.S., and Chowdari, B.V.R., Structure, Superconductivity and Magnetic Properties of Mechanically Alloyed Mg1 − x FexB2 Powders with x = 0–0.4, Acta Mater., 2004, vol. 52, pp. 1543–1553.

    Article  CAS  Google Scholar 

  7. Malakhov, V.V., Stoichiography As Applied to Studying Composition and Real Structure of Catalysts, J. Mol. Catal. A: Chem., 2000, vol. 158, no. 1, pp. 143–148.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to O. I. Lomovsky.

Additional information

Original Russian Text © O.I. Lomovsky, G.V. Golubkova, L.S. Dovlitova, V.I. Zaikovskii, V.I. Maly, 2010, published in Neorganicheskie Materialy, 2010, Vol. 46, No. 1, pp. 28–33.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lomovsky, O.I., Golubkova, G.V., Dovlitova, L.S. et al. Mechanochemical synthesis of amorphous and crystalline magnesium diboride. Inorg Mater 46, 22–27 (2010). https://doi.org/10.1134/S0020168510010061

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0020168510010061

Keywords

Navigation