Abstract
The technique for cast alloy production on the basis of titanium aluminide with the SHS method is developed. It is shown that a combination of compounds with a minor thermal effect and “power” addition serves to realize the mode of burning wave self-propagation without extra heat sources and to obtain materials in cast form. Overloading provides the maximum yield of metal in the ingot and an even distribution of components in the alloy volume. Results of research can serve a basis for the development of technology aimed at producing a number of prospective alloys on the basis of titanium intermetallides.
Similar content being viewed by others
References
Huang, S.C., Chesnutt, J.C., Gamma TiAl and its Alloys, Intermet. Compd., 1994, vol. 2, pp. 73–88.
Materials Properties Handbook: Titanium Alloys, ASM International, 1994.
Bannykh, O.A., Povarova, K.V., Braslavskaya, S.B., Mechanical Properties of Cast Alloys of γ-TiAl, Metal Science and Thermal Treatment of Metals, 1996, no. 4, pp. 11–14.
Merzhanov, A.G., SHS: Twenty Years of Search and Findings, Combustion and Plasma Synthesis of High-Temperature Materials, Eds. Munir, Z.A., et al., N.Y., VCH, 1990, pp. 1–53.
Itin, V.I., Nayborodinko, Yu.S., High Temperature Synthesis of Intermetallide Compositions, Tomsk, Izd. Tomsk University, 1989, p. 209.
Chemistry of Synthesis by Burning, Ed. Koidzumi, M., Transl. From Jap., Moscow, ISBN 5-03-003107-3, 1998.
Uenishi, K., Matsubara, T., Kambara, M., et al., Nanostructured Titanium-Aluminides and Their Composites Formed by Combustion Synthesis of Mechanically Alloyed Powders, Scr. Mater., 2001, no, 44, pp. 2093–2097.
Munir, Z.A., The Use of an Electric Field as a Processing Parameter in Burning Synthesis of Ceramic and Composites, Metall. Mater. Trans. A., 1996, vol. 27, no. 8, pp. 2080–2085.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.E. Andreev, V.N. Sanin, V.I. Yukhvid, 2009, published in Neorganicheskie Materialy, 2009, Vol. 45, No. 8, pp. 934–940.
Rights and permissions
About this article
Cite this article
Andreev, D.E., Sanin, V.N. & Yukhvid, V.I. Cast alloy production on the basis of titanium aluminide with centrifugal SHS method. Inorg Mater 45, 867–872 (2009). https://doi.org/10.1134/S0020168509080081
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168509080081