Abstract
By using LiCO3 and MnO2, a rheological-phase-assisted microwave synthesis method has been applied in the fast preparation of spinel LiMn2O4 in order to reduce the cost of cathode materials. Comparing with the pristine LiMn2O4 obtained by the traditional solid-state reaction method, the structure and surface morphology of the samples synthesized by the rheological-phase-assisted microwave synthesis method have been investigated. The powders were used as positive materials for lithium-ion battery, whose charge/discharge properties and cycle performance have been examined in detail. As a result, the powders prepared by the rheologicalphase-assisted microwave synthesis method at 750°C are pure spinel LiMn2O4 with regular shapes and uniform distribution, which exhibit higher capacity and much better reversibility than the sample prepared by the traditional solid-state reaction.
Similar content being viewed by others
References
Nishi, Y., Lithium Ion Secondary Batteries; Past 10 Years and the Future, J. Power Sources, 2001, vol. 100, nos. 1–2, pp. 101–106.
Wang, Z., Ikuta, H., Uchimoto, Y., and Wakihara, M., Preparation and Electrochemical Properties of Stoichiometric and Nonstoichiometric LiCoxMn2–x O4 − δ, J. Electrochem. Soc., 2003, vol. 150, no. 9, pp. A1250–A1254.
Tucker, M.C., Kroeck, L., Reimer, J.A., and Cairns, E.J., The Influence of Covalence on Capacity Retention in Metal-Substituted Spinels, J. Electrochem. Soc., 2002, vol. 149, no. 11, pp. A1409–A1413.
Im, D. and Manthiram, A., Nanostructured Lithium Manganese Oxide Cathodes Obtained by a Reduction of Aqueous Lithium Permanganate with Hydrogen, J. Electrochem. Soc., 2003, vol. 150, no. 6, pp. A742–A746.
Zhang, P., Fan, H., and Fu, Y., Synthesis and Electrochemical Properties of Sol-Gel Derived LiMn2O4 Cathode for Lithium-Ion Batteries, Rare Metals, 2006, vol. 25, no. 6, pp. 100–104.
Barboux, P., Tarascon, J.M., and Shokoohi, F.K., The Use of Acetates As Precursors for the Low-Temperature Synthesis of LiMn2O4 and LiCoO2 Intercalation Compounds, J. Solid State Chem., 1991, vol. 94, no. 1, pp. 185–196.
Wang, G.X., Bradhurst, D.H., Liu, H.K., and Dou, S.X., Improvement of Electrochemical Properties of the Spinel LiMn2O4 Using a Cr Dopant Effect, Solid State Ionics, 1999, vol. 120, nos. 1–4, pp. 95–101.
Fu, Y.-P., Su, Y.-H., and Lin, C.-H., Comparison of Microwave-Induced Combustion and Solid-State Reaction for Synthesis of LiMn2-x CrxO4 Powders and Their Electrochemical Properties, Solid State Ionics, 2004, vol. 166, nos. 1–2, pp. 137–146.
Yan, H., Huang, X., and Chen, L.J., Microwave Synthesis of LiMn2O4 Cathode Material, Power Sources, 1999, vols. 81–82, pp. 647–650.
Xiao, J., Zhan, H., and Zhou, Y., Layered-Structure LiMn1 − x CrxO2 for Lithium-Ion Batteries by the Rheological Phase Method, Mater. Lett., 2004, vol. 58, no. 10, pp. 1620–1624.
Zhou, W.-J., Bao, S.-L., He, B.-L., et al., Synthesis and Electrochemical Properties of LiAl0.05Mn1.95O4 by the Ultrasonic Assisted Rheological Phase Method, Electrochim. Acta, 2006, vol. 51, no. 22, pp. 4701–4708.
Tarascon, J.M., Mckinnon, W.R., Coowar, F., et al., Synthesis Conditions and Oxygen Stoichiometry Effects On Li Insertion into the Spinel LiMn2O4, J. Electrochem. Soc., 1994, vol. 141, no. 6, pp. 1421–1431.
Yan, H., Huang, X., Lu, Z., et al., Microwave Synthesis of LiCoO2 Cathode Materials, J. Power Sources, 1997, vol. 68, no. 2, pp. 530–532.
Bang, H.J., Donepudi, V.S., and Prakash, J., Preparation and Characterization of Partially Substituted LiMn2O4 (M = Ni, Co, Fe) Spinel Cathodes for Li-Ion Batteries, Electrochim. Acta, 2002, vol. 48, no. 4, pp. 443–451.
Xia, Y. and Yoshio, M., An Investigation of Lithium Ion Insertion into Spinel Structure Li-Mn-O Compounds, J. Electrochem. Soc., 1996, vol. 143, no. 3, pp. 825–828.
Wu, X.M., Li, X.H., Xiao, Z.B., et al., Synthesis and Characterization of LiMn2O4 Powders by the Combustion-Assisted Sol-Gel Technique, Mater. Chem. Phys., 2004, vol. 84, no. 1, pp. 182–186.
Zhang, Y., Shin, H.-C., Dong, J., and Liu, M., Nanostructured LiMn2O4 Prepared by a Glycine-Nitrate Process for Lithium-Ion Batteries, Solid State Ionics, 2004, vol. 171, nos. 1–2, pp. 25–31.
Santiago, E.I., Amancio-Filho, S.T., Bueno, P.R., and Bulhoes, L.O.S., Electrochemical Performance of Cathodes Based on LiMn2O4 Spinel Obtained by Combustion Synthesis, J. Power Sources, 2001, vols. 97–98, pp. 447–449.
Du, K. and Zhang, H., Preparation and Performance of Spinel LiMn2O4 by a Citrate Route with Combustion, J. Alloy Compd., 2003, vol. 352, nos. 1–2, pp. 250–254.
Matsuda, K. and Taniguchi, I., Relationship between the Electrochemical and Particle Properties of LiMn2O4 Prepared by Ultrasonic Spray Pyrolysis, J. Power Sources, 2004, vol. 132, nos. 1–2, pp. 156–160.
Author information
Authors and Affiliations
Corresponding author
Additional information
The text was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Cui, T., Hua, N., Han, Y. et al. Preparation and electrochemical properties of LiMn2O4 by a rheological-phase-assisted microwave synthesis method. Inorg Mater 44, 542–548 (2008). https://doi.org/10.1134/S002016850805021X
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S002016850805021X